oSIST prEN ISO 12543-1:2020
(Main)Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO/DIS 12543-1:2020)
Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO/DIS 12543-1:2020)
Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Teil 1: Definitionen und Beschreibung von Bestandteilen (ISO/DIS 12543-1:2020)
Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 1: Définitions et description des composants (ISO/DIS 12543-1:2020)
Steklo v gradbeništvu - Lepljeno steklo in lepljeno varnostno steklo - 1. del: Definicije in opis sestavnih delov (ISO/DIS 12543-1:2020)
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO 12543-1:2020
01-april-2020
Steklo v gradbeništvu - Lepljeno steklo in lepljeno varnostno steklo - 1. del:
Definicije in opis sestavnih delov (ISO/DIS 12543-1:2020)
Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and
description of component parts (ISO/DIS 12543-1:2020)Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Teil 1: Definitionen und
Beschreibung von Bestandteilen (ISO/DIS 12543-1:2020)Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 1:
Définitions et description des composants (ISO/DIS 12543-1:2020)Ta slovenski standard je istoveten z: prEN ISO 12543-1
ICS:
01.040.81 Steklarska in keramična Glass and ceramics
industrija (Slovarji) industries (Vocabularies)
81.040.20 Steklo v gradbeništvu Glass in building
oSIST prEN ISO 12543-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 12543-1:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 12543-1:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 12543-1
ISO/TC 160/SC 1 Secretariat: BSI
Voting begins on: Voting terminates on:
2020-01-20 2020-04-13
Glass in building — Laminated glass and laminated
safety glass —
Part 1:
Definitions and description of component parts
Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité —
Partie 1: Définitions et description des composants
ICS: 81.040.20; 01.040.81
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 12543-1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 12543-1:2020
ISO/DIS 12543-1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 12543-1:2020
ISO/DIS 12543-1:2020(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ...................................................................................................................................................................................... 1
3 Terms and definitions ..................................................................................................................................................................................... 1
4 Description of component parts .......................................................................................................................................................... 3
4.1 General ........................................................................................................................................................................................................... 3
4.2 Glass composition and type ......................................................................................................................................................... 3
4.2.1 Glass composition ........................................................................................................................................................... 4
4.2.2 Glass type ............................................................................................................................................................................... 4
4.2.3 Other characteristics of glass ................................................................................................................................ 4
4.3 Plastic glazing sheet material ..................................................................................................................................................... 4
4.4 Interlayers ................................................................................................................................................................................................... 4
4.5 Films, plates, wires and grids ..................................................................................................................................................... 5
Annex A (informative) List of EN product standards for glass compositions and types .................................6
Annex B (informative) List of ISO product standards for glass compositions and types ...............................7
Bibliography ................................................................................................................................................................................................................................ 8
© ISO 2020 – All rights reserved iii---------------------- Page: 5 ----------------------
oSIST prEN ISO 12543-1:2020
ISO/DIS 12543-1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 160, Glass in building Subcommittee SC 1,
Product considerations.This third edition cancels and replaces the second edition (ISO 12543-1:2011), which has been
technically revised.The main changes compared to the previous edition are as follows:
— Editorial changes
— ….
A list of all parts in the ISO 12543 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 12543-1:2020
DRAFT INTERNATIONAL STANDARD ISO/DIS 12543-1:2020(E)
Glass in building — Laminated glass and laminated
safety glass —
Part 1:
Definitions and description of component parts
1 Scope
This part of ISO 12543 defines terms and describes component parts for laminated glass and laminated
safety glass for use in building.2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 472, Plastics — Vocabulary3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
Note 1 to entry Definitions 2.3 onwards apply to both laminated glass and laminated safety glass.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp— IEC Electropedia: available at http:// www .electropedia .org/
3.1
Laminated glass
assembly consisting of one sheet of glass with one or more sheets of glass and/or plastic glazing sheet
material joined together with one or more interlayersNote 1 to entry: See ISO 12543-3.
3.2
laminated safety glass
laminated glass classified in accordance with a soft body impact standard where in the case of breakage
the interlayer serves to retain the glass fragments, limits the size of opening, offers residual resistance
and reduces the risk of cutting or piercing injuries.Note 1 to entry: See ISO 12543-2.
3.3
fire-resistant laminated glass
laminated glass where at least one interlayer reacts to the high temperature to give the product its fire
resistanceNote 1 to entry: Fire resistant laminated glass can also contain glass components which are themselves fire
resistant.© ISO 2020 – All rights reserved 1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.