SIST EN 12561-1:2011

Railway applications - Tank wagons - Part 1: Identification plates for tank wagons for the carriage of dangerous goods

This European Standard lays down the identification plates for tank wagons used for the carriage of:
- liquefied gases of class 2 of RID,
- substances of classes 3, 4.1, 4.2, 4.3, 5.1, 5.2, 6.1, 6.2, 8 and 9 of RID.
Compressed gases have not been considered in this European Standard.
This European Standard defines also the dimensions and the fixing of identification plates and various particulars to be marked on them.
The requirements of RID shall override conflicting requirements of this document.
This standard applies to new tank wagons build after the 1st January 2010.

Bahnanwendungen - Kesselwagen - Teil 1: Kennzeichnungsschilder von Kesselwagen für die Beförderung von gefährlichen Gütern

Diese Europäische Norm gilt für Kennzeichnungsschilder von Kesselwagen zum Transport von:
-   verflüssigten Gasen der Klasse 2 des RID,
-   Stoffen der Klassen 3, 4.1, 4.2, 4.3, 5.1, 5.2, 6.1, 6.2, 8 und 9 des RID.
Komprimierte Gase sind in dieser Europäischen Norm nicht berücksichtigt worden.
Diese Europäische Norm legt auch die Abmessungen und Befestigungen der Tankschilder und die verschiedenen Einzelheiten, die darauf eingetragen werden, fest.
Die Anforderungen der RID müssen sich über widersprüchliche Anforderungen dieser Europäischen Norm hinwegsetzen.
Diese Europäische Norm gilt für neue Kesselwagen, die nach dem 1. Januar 2010 gebaut werden.

Applications ferroviaires - Wagons citernes - Partie 1 : Plaques d'identité des wagons citernes destinés au transport des matières dangereuses

Cette Norme européenne présente les plaques d'identité pour les wagons citernes destinés au transport des :
-   gaz liquéfiés de la classe 2 du RID ;
-   matières des classes 3, 4.1, 4.2, 4.3, 5.1, 5.2, 6.1, 6.2, 8 et 9 du RID.
Les gaz comprimés n'ont pas été pris en considération dans cette Norme européenne.
Cette Norme européenne définit également les dimensions et le mode de fixation des plaques d'identité et les diverses mentions à y marquer.
Les exigences du RID ont la priorité sur les exigences conflictuelles de la présente Norme européenne.
La présente Norme européenne s’applique aux nouveaux wagons citernes fabriqués après le 1er janvier 2010.

Železniške naprave - Vagoni-cisterne - 1. del: Označevalne tablice za vagone-cisterne za prevoz nevarnih snovi

Ta evropski standard določa označevalne tablice za vagone-cisterne, ki se uporabljajo za prevoz: utekočinjenih plinov razreda 2 RID, snovi razredov 3, 4.1, 4.2, 4.3, 5.1, 5.2, 6.1, 6.2, 8 in 9 RID. Stisnjeni plini v tem evropskem standardu niso obravnavani. Ta evropski standard opredeljuje tudi mere in pritrjanje označevalnih ploščic ter različne informacije, ki morajo biti navedene na njih. Zahteve RID razveljavljajo nasprotujoče zahteve tega evropskega standarda. Ta evropski standard velja za nove vagone-cisterne, narejene po 1. januarju 2010.

General Information

• Status: Published
• Public Enquiry End Date: 24-Apr-2011
• Publication Date: 13-Sep-2011
• ICS: 13.300 - Protection against dangerous goods
• ICS: 45.060.20 - Trailing stock
• Technical Committee: IŽNP - Reilway applications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 06-Sep-2011
• Due Date: 11-Nov-2011
• Completion Date: 14-Sep-2011
• Ref Project: EN 12561-1:2011 - Railway applications - Tank wagons - Part 1: Identification plates for tank wagons for the carriage of dangerous goods

Relations

• Replaces: SIST EN 12561-1:2001 - Railway applications - Tank wagons - Part 1: Marking of tank wagons for the carriage of dangerous goods
• Effective Date: 01-Oct-2011
• Replaces: SIST EN 12561-1:2001 - Railway applications - Tank wagons - Part 1: Marking of tank wagons for the carriage of dangerous goods
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Kesselwagen - Teil 1: Kennzeichnungsschilder von Kesselwagen für die Beförderung von gefährlichen GüternApplications ferroviaires - Wagons citernes - Partie 1 : Plaques d'identité des wagons citernes destinés au transport des matières dangereusesRailway applications - Tank wagons - Part 1: Identification plates for tank wagons for the carriage of dangerous goods45.060.20Železniški vagoniTrailing stock13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 12561-1:2011SIST EN 12561-1:2011en,fr,de01-oktober-2011SIST EN 12561-1:2011SLOVENSKI
STANDARDSIST EN 12561-1:20011DGRPHãþD



SIST EN 12561-1:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12561-1
June 2011 ICS 13.300; 45.060.20 Supersedes EN 12561-1:1998English Version
Railway applications - Tank wagons -Part 1: Identification plates for tank wagons for the carriage of dangerous goods
Applications ferroviaires - Wagons citernes - Partie 1 : Plaques d'identité des wagons citernes destinés au transport des matières dangereuses
Bahnanwendungen - Kesselwagen - Teil 1: Kennzeichnungsschilder von Kesselwagen für die Beförderung von gefährlichen Gütern This European Standard was approved by CEN on 3 June 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12561-1:2011: ESIST EN 12561-1:2011



EN 12561-1:2011 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Identification plates for gases .54.1 General .54.2 Identification plate for gases liquefied under pressure .54.3 Identification plate for refrigerated liquefied gases .85 Identification plates for liquid and solid substances . 105.1 General . 105.2 Identification plate for general purposes . 105.3 Identification plate for specific substances . 116 Common requirements . 146.1 Manufacturing process and materials . 146.2 Marking . 146.3 Position and attachment of the identification plate . 146.4 Language . 14Bibliography . 15 Figures Figure 1 — Identification plate for liquefied gases .6Figure 2 — Identification plate for refrigerated liquefied gases .8Figure 3 — Identification plate for general purposes . 10Figure 4 — Identification plate for specific substances . 12Figure 5 — Location of identification plate . 14 Tables Table 1 — Particulars to be indicated on the identification plate for liquefied gases .7Table 2 — Particulars to be indicated on the identification plate for refrigerated liquefied gases .9Table 3 — Particulars to be indicated on the identification plate for general purposes . 11Table 4 — Particulars to be indicated on the identification plate for specific substances. 13
SIST EN 12561-1:2011



EN 12561-1:2011 (E) 3 Foreword This document (EN 12561-1:2011) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn at the latest by December 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12561-1:1998. This European Standard Railway applications — Tank wagons consists of the following parts:  Part 1: Identification plates for tank wagons for the carriage of dangerous goods;  Part 2: Bottom emptying devices for liquid products including vapour return;  Part 3: Bottom filling and emptying devices for gases liquefied under pressure;  Part 4: Devices for top filling and emptying of liquid products;  Part 5: Devices for vapour return while filling or emptying of liquid products;  Part 6: Manholes;  Part 7: Platforms and ladders;  Part 8: Heating connections. The previous version of EN12561-1 set requirements for marking and identification plate for tank wagons. All the marking requirements for tank wagons are put in the prEN 15877-1. The EN12561-1 describes only the identification plate. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 12561-1:2011



EN 12561-1:2011 (E) 4 1 Scope This European Standard lays down the identification plates for tank wagons used for the carriage of:  liquefied gases of class 2 of RID,  substances of classes 3, 4.1, 4.2, 4.3, 5.1, 5.2, 6.1, 6.2, 8 and 9 of RID. Compressed gases have not been considered in this European Standard. This European Standard also defines the dimensions and the fixing of identification plates and various particulars to be marked on them. The requirements of RID shall override conflicting requirements of this European Standard. This European Standard applies to new tank wagons built after the 1st January 2010. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10088-2, Stainless steels — Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes EN 14564, Tanks for transport of dangerous goods- Terminology 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 14564 and the following apply.
3.1 capacity capacity of shell or shell compartment for tanks, i.e. the total
...