Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products

This European Standard specifies the requirements on and characteristics of top devices of tank wagons fitted for bottom emptying only and filling through the manhole and used for liquid substances of RID. Safety functions of these devices are subject to RID requirements and not described in this document.
This European Standard specifies in particular the important dimensions and arrangements for the connections of such tank wagons.
This standard applies to new tank wagons build after the 1st January 2010.
NOTE   To take account of the loading gauge restrictions within Great Britain this European Standard does not apply to tank wagons operating exclusively therein.

Bahnanwendungen - Kesselwagen - Teil 5: Gaspendeleinrichtungen für Be- und Entladung von flüssigen Stoffen

Diese Europäische Norm legt Anforderungen und Eigenschaften für die oberen Ausrüstungsteile von Kesselwagen mit untenliegenden Entleereinrichtungen zum Transport von Stoffen des RID im flüssigen Zustand fest. Sicherheitsfunktionen dieser Einrichtungen unterliegen den Anforderungen der RID und werden in diesem Dokument nicht beschrieben.
Diese Europäische Norm legt die wichtigsten Abmessungen und Anordnungen der Anschlüsse fest.
Diese Norm gilt für neue Kesselwagen, die nach dem 1. Januar 2010 gebaut werden.
ANMERKUNG   Um die Einschränkungen des Lademaßes in Großbritannien zu berücksichtigen, gilt diese Europäische Norm nicht für Kesselwagen, die ausschließlich dort eingesetzt werden.

Applications ferroviaires - Wagons citernes - Partie 5: Dispositifs de vidange par le bas et de remplissage par le haut pour produits liquides

La présente Norme européenne spécifie les exigences et les caractéristiques des dispositifs supérieurs de wagons citernes à vidange par le bas uniquement et chargés par le trou d’homme et utilisés pour le transport de matières du RID à l’état liquide. Les fonctions de sécurité de ces dispositifs sont soumises aux exigences du RID et ne sont pas décrites dans le présent document.
La présente Norme européenne spécifie en particulier les dimensions essentielles et les dispositions des raccordements de ces wagons citernes.
La présente norme s’applique aux nouveaux wagons citernes fabriqués après le 1er janvier 2010.
NOTE   Compte tenu des restrictions du gabarit de chargement propres à la Grande-Bretagne, la présente Norme européenne n’est pas applicable aux wagons citernes exploités exclusivement à l’intérieur de ce pays.

Železniške naprave - Vagoni-cisterne - 5. del: Naprave za preprečevanje izparevanja pri polnjenju ali praznjenju tekočin

Ta evropski standard določa zahteve in značilnosti za naprave, nameščene na vrhu vagonov-cistern, namenjene samo za praznjenje z dna in polnjenje skozi vhodno odprtino, ki se uporabljajo za tekoče snovi RID. Za varnostne funkcije naprav veljajo zahteve RID in niso opisane v tem dokumentu. Ta evropski standard določa najpomembnejše mere in razporeditve priključkov takih vagonov-cistern. Ta evropski standard velja za nove vagone-cisterne, narejene po 1. januarju 2010.

General Information

Status
Published
Public Enquiry End Date
24-Jun-2011
Publication Date
14-Sep-2011
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
06-Sep-2011
Due Date
11-Nov-2011
Completion Date
15-Sep-2011

Relations

Buy Standard

Standard
EN 12561-5:2011
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HYDQMHBahnanwendungen - Kesselwagen - Teil 5: Gaspendeleinrichtungen für Be- und Entladung von flüssigen StoffenApplications ferroviaires - Wagons citernes - Partie 5: Dispositifs de vidange par le bas et de remplissage par le haut pour produits liquidesRailway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products45.060.20Železniški vagoniTrailing stock13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 12561-5:2011SIST EN 12561-5:2011en,fr,de01-oktober-2011SIST EN 12561-5:2011SLOVENSKI
STANDARDSIST EN 12561-5:20041DGRPHãþD



SIST EN 12561-5:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12561-5
June 2011 ICS 13.300; 45.060.20 Supersedes EN 12561-5:2002English Version
Railway applications - Tank wagons -Part 5: Devices for vapour return while filling or emptying of liquid products
Applications ferroviaires - Wagons citernes - Partie 5: Dispositifs de récupération de vapeur pour remplissage ou vidange de produits liquides
Bahnanwendungen - Kesselwagen - Teil 5: Gaspendeleinrichtungen für Be- und Entladung von flüssigen Stoffen This European Standard was approved by CEN on 3 June 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12561-5:2011: ESIST EN 12561-5:2011



EN 12561-5:2011 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 Requirements .64.1 General .64.2 Manhole .64.3 Depressurisation vapour connector .64.4 Safety valves .64.5 Dimensions .65 Positioning of equipment and reserved spaces .6Bibliography .8 Figure Figure 1 — Positioning of equipment and reserved spaces .7 SIST EN 12561-5:2011



EN 12561-5:2011 (E) 3 Foreword This document (EN 12561-5:2011) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN . This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn at the latest by December 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12561-5:2002. European Standard Railway applications — Tank wagons consists of the following parts:  Part 1: Identification plates for tank wagons for the carriage of dangerous goods;  Part 2: Bottom emptying devices for liquid products including vapour return;  Part 3: Bottom filling and emptying devices for gases liquefied under pressure;  Part 4: Devices for top filling and emptying of liquid products;  Part 5: Devices for vapour return while filling or emptying of liquid products;  Part 6: Manholes;  Part 7: Platforms and ladders;  Part 8: Heating connections.
The changes made during this revision are editorial because of the ch
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.