SIST EN ISO 9902-7:2002/A2:2014

Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001/Amd 2:2014)

This Part 7 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines used for the following processes (see ISO 1506): - preparation; - dyeing; - printing; - fixing, wetting, drying; - finishing; - making-up/presentation.

Textilmaschinen - Geräuschmessverfahren - Teil 7: Textilveredlungsmaschinen (ISO 9902-7:2001/Amd 2:2014)

Matériel pour l'industrie textile - Code d'essai acoustique - Partie 7: Machines de teinture et de finissage (ISO 9902-7:2001/Amd 2:2014)

Tekstilni stroji - Preskusni postopki za merjenje hrupa - 7. del: Stroji za barvanje in končno obdelavo - Dopolnilo A2 (ISO 9902-7:2001/Amd 2:2014)

7. del standarda dopolnjuje 1. del in skupaj z njim določa zahteve za priključitev, delovanje in merjenje, potrebne za merjenje, deklariranje in preverjanje hrupa, ki ga oddajajo različne vrste strojev za pripravo preje in predilnih strojev. Uporablja se za inženirske metode (razred 2) in raziskovalne metode (razred 3), opredeljene v navedenih standardih. Obravnava stroje, ki se uporabljajo za naslednje procese (glej standard ISO 1506): – pripravo; – barvanje; – tiskanje; – vezanje, močenje, sušenje; – končno obdelavo; – sestavljanje/predstavitev.

General Information

• Status: Published
• Public Enquiry End Date: 30-Apr-2013
• Publication Date: 14-Jul-2014
• ICS: 17.140.20 - Noise emitted by machines and equipment
• ICS: 59.120.50 - Dying and finishing equipment
• Technical Committee: VSN - Safety of machinery
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 10-Jul-2014
• Due Date: 14-Sep-2014
• Completion Date: 15-Jul-2014
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: EN ISO 9902-7:2001/A2:2014 - Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001/Amd 2:2014)

Relations

• Amends: SIST EN ISO 9902-7:2002 - Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)
• Effective Date: 01-Sep-2014

Overview

SIST EN ISO 9902-7:2002/A2:2014 is an important international standard focused on the noise testing of textile machinery, specifically dyeing and finishing machinery. Developed through a collaboration between ISO Technical Committee 72 (Textile machinery and related equipment) and CEN/TC 214 (Textile machinery and accessories), this standard sets out noise measurement codes and procedures to help manufacturers and users assess the noise emissions of textile finishing machines. The amendment (A2:2014) updates the original ISO 9902-7:2001 to reflect improved requirements and align with European regulatory frameworks.

This standard supports compliance with EU directives related to machinery safety and environmental noise, offering manufacturers practical guidance on noise emission testing in dyeing and finishing processes. It also provides a benchmark for noise control, helping reduce occupational noise exposure and environmental noise pollution in textile manufacturing facilities.

Key Topics

• Scope of Application: Applies specifically to dyeing and finishing textile machinery, covering the noise emitted during machine operation.
• Noise Measurement Methods: Defines the test code procedures, emphasizing standardized operating and environmental conditions to ensure comparability of noise data.
• Testing Environment Requirements: Details requirements for measurement locations and machine setup, recognizing that high-grade noise measurement methods may be difficult to implement in typical textile manufacturing environments.
• Reference to EU Directives: Offers conformance guidance with EU Directive 98/37/EC (Machinery Directive) and related safety and noise emission legislation.
• Amendment Details: The 2014 amendment clarifies testing conditions and reinforces the practical measurement methods relevant for the textile industry, addressing challenges such as operational noise variability.
• Documentation and Reporting: Stipulates the presentation of test results for transparency and comparability.

Applications

• Manufacturers of Dyeing and Finishing Equipment: Enable product design improvements to lower noise emissions and demonstrate compliance with international and regional regulations.
• Textile Factories and Industrial Laundries: Use the standard to assess machine noise levels, helping protect workers from occupational noise hazards and maintain a safer work environment.
• Regulatory Bodies and Compliance Auditors: Utilize the standard as a reference for certification or regulatory inspections related to noise emissions in textile machinery.
• Research and Development: Provides baseline testing methodologies for innovation and noise reduction strategy development in textile machinery.
• Environmental Health and Safety Programs: Supports initiatives aimed at reducing environmental noise pollution within industrial zones using textile machinery.

Related Standards

• ISO 9902 (Noise Test Codes) Series: EN ISO 9902-7 is part of the broader 9902 series addressing noise test codes for various types of textile machinery.
• EU Machinery Directive 98/37/EC: The standard aligns with key essential requirements focused on machinery safety, including noise emissions.
• ISO/IEC Directives Part 2: Governs the drafting of international standards, ensuring consistency in terminology and structure.
• Other Textile Machinery Safety Standards: Such as EN ISO 12100 for general machine safety principles.

---

By following SIST EN ISO 9902-7:2002/A2:2014, stakeholders in the textile industry can effectively manage noise emissions, ensuring safer and more environmentally responsible dyeing and finishing operations. This standard is indispensable for compliance, quality assurance, and sustainable textile machinery manufacturing and usage.

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9902-7:2002/oprA2:2013
01-april-2013
7HNVWLOQLVWURML3RVWRSNL]DPHUMHQMHKUXSDGHO6WURML]DEDUYDQMHLQNRQþQR
REGHODYR'RSROQLOR$,62'$0
Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-
7:2001/DAM 2:2013)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 7: Machines de teinture
et de finissage (ISO 9902-7:2001/DAM 2:2013)
Ta slovenski standard je istoveten z: EN ISO 9902-7:2001/prA2
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
59.120.50 Barvalna in apretirna oprema Dying and finishing
equipment
SIST EN ISO 9902-7:2002/oprA2:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN ISO 9902-7:2002/oprA2:2013

SIST EN ISO 9902-7:2002/oprA2:2013

EUROPEAN STANDARD
DRAFT
EN ISO 9902-7:2001
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA2
January 2013
ICS 17.140.20; 59.120.50
English Version
Textile machinery - Noise test code - Part 7: Dyeing and
finishing machinery (ISO 9902-7:2001/DAM 2:2013)
Matériel pour l'industrie textile - Code d'essai acoustique -
Partie 7: Machines de teinture et de finissage (ISO 9902-
7:2001/DAM 2:2013)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 214.

This draft amendment A2, if approved, will modify the European Standard EN ISO 9902-7:2001. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9902-7:2001/prA2:2013: E
worldwide for CEN national Members.

SIST EN ISO 9902-7:2002/oprA2:2013
EN ISO 9902-7:2001/prA2:2013 (E)
Contents Page
Foreword .3

SIST EN ISO 9902-7:2002/oprA2:2013
EN ISO 9902-7:2001/prA2:2013 (E)
Foreword
This document (EN ISO 9902-7:2001/prA2:2013) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and machinery for dry-cleaning and industrial laundering" in collaboration with Technical
Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV.
This document is currently submitted to the parallel Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
Endorsement notice
The text of ISO 9902-7:2001/DAM 2:2013 has been approved by CEN as a EN ISO 9902-7:2001/prA2:2013
without any modification.
SIST EN ISO 9902-7:2002/oprA2:2013

SIST EN ISO 9902-7:2002/oprA2:2013

DRAFT AMENDMENT ISO 9902-7:2001/DAM 2
ISO/TC 72/SC 8 Secretariat: DIN
Voting begins on Voting terminates on

2013-01-10 2013-06-10
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION  •  МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ  •  ORGANISATION INTERNATIONALE DE NORMALISATION

Textile machinery — Noise test code —
Part 7:
Dyeing and finishing machinery
AMENDMENT 2
Matériel pour l'industrie textile — Code d'essai acoustique —
Partie 7: Machines de teinture et de finissage
AMENDEMENT 2
ICS 17.140.20; 59.120.01
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received,
...

SLOVENSKI STANDARD
01-september-2014
7HNVWLOQLVWURML3UHVNXVQLSRVWRSNL]DPHUMHQMHKUXSDGHO6WURML]DEDUYDQMHLQ
NRQþQRREGHODYR'RSROQLOR$,62$PG
Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-
7:2001/Amd 2:2014)
Textilmaschinen - Geräuschmessverfahren - Teil 7: Textilveredlungsmaschinen (ISO
9902-7:2001/Amd 2:2014)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 7: Machines de teinture
et de finissage (ISO 9902-7:2001/Amd 2:2014)
Ta slovenski standard je istoveten z: EN ISO 9902-7:2001/A2:2014
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
59.120.50 Barvalna in apretirna oprema Dying and finishing
equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 9902-7:2001/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2014
ICS 17.140.20; 59.120.50
English Version
Textile machinery - Noise test code - Part 7: Dyeing and finishing
machinery (ISO 9902-7:2001/Amd 2:2014)
Matériel pour l'industrie textile - Code d'essai acoustique - Textilmaschinen - Geräuschmessverfahren - Teil 7:
Partie 7: Machines de teinture et de finissage (ISO 9902- Textilveredlungsmaschinen (ISO 9902-7:2001/Amd 2:2014)
7:2001/Amd 2:2014)
This amendment A2 modifies the European Standard EN ISO 9902-7:2001; it was approved by CEN on 7 May 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9902-7:2001/A2:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .4
Foreword
This document (EN ISO 9902-7:2001/A2:2014) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and accessories" in collaboration with Technical Committee CEN/TC 214 “Textile
machinery and accessories” the secretariat of which is held by SNV.
This Amendment to the European Standard EN ISO 9902-7:2001 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2014, and
conflicting national standards shall be withdrawn at the latest by December 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nethe
...