SIST IEC 80416-1:2002

Basic principles for graphical symbols for use on equipment - Part 1: Creation of symbol originals

This Part 1 of the standard specifies the key principles for the creation of symbol originals for use on equipment. In accordance with the intended meaning of the symbol originals, it contains rules for design such as shape and size, and also for preparation of the accompanying texts. It has the status of a horizontal standard in accordance with IEC Guide 108.

Principes de base pour les symboles graphiques utilisables sur le matériel - Partie 1: Création des dessins originaux de symboles

Cette partie 1 de la norme établit les principes clés pour la création de dessins originaux de symboles utilisables sur le matériel. En accord avec la signification prévue pour les dessins originaux de symboles, elle contient des règles pour leur dessin, telles que la forme et la dimension, ainsi que pour la préparation des textes d'accompagnement. Elle a le statut d'une norme horizontale conformément au Guide 108 de la CEI.

Osnovna načela grafičnih simbolov za rabo na opremi - 1. del: Oblikovanje grafičnih simbolov

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-2002
• Withdrawal Date: 31-Aug-2004
• ICS: 01.080.20 - Graphical symbols for use on specific equipment
• ICS: 29.020 - Electrical engineering in general
• Technical Committee: TRS - Technical drawings, quantities, units, symbols and graphical symbols
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Sep-2004
• Due Date: 01-Sep-2004
• Completion Date: 01-Sep-2004
• Ref Project: IEC 80416-1 - Basic principles for graphical symbols for use on equipment - Part 1: Creation of symbol originals

Standards Content (Sample)

SLOVENSKI STANDARD
SIST IEC 80416-1:2002
01-februar-2002
2VQRYQDQDþHODJUDILþQLKVLPERORY]DUDERQDRSUHPLGHO2EOLNRYDQMH
JUDILþQLKVLPERORY
Basic principles for graphical symbols for use on equipment - Part 1: Creation of symbol
originals
Principes de base pour les symboles graphiques utilisables sur le matériel - Partie 1:
Création des dessins originaux de symboles
Ta slovenski standard je istoveten z: IEC 80416-1
ICS:
01.080.20 *UDILþQLVLPEROL]DSRVHEQR Graphical symbols for use on
RSUHPR specific equipment
29.020 Elektrotehnika na splošno Electrical engineering in
general
SIST IEC 80416-1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST IEC 80416-1:2002

---------------------- Page: 2 ----------------------

SIST IEC 80416-1:2002
NORME CEI
INTERNATIONALE IEC
80416-1
INTERNATIONAL
Première édition
STANDARD
First edition
2001-06
Principes de base pour les symboles graphiques
utilisables sur le matériel –
Partie 1:
Création des dessins originaux de symboles
Basic principles for graphical symbols
for use on equipment –
Part 1:
Creation of symbol originals
 IEC 2001 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
P
PRICE CODE
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 3 ----------------------

SIST IEC 80416-1:2002
80416-1  IEC:2001 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9
1 Scope.11
2 Normative references.11
3 Definitions .13
4 Meaning .13
4.1 Assignment .13
4.2 Orientation of graphical symbols .15
5 Combination of graphical symbols.15
6 Creation principles.17
6.1 Creation of symbol original.17
6.2 Design guidelines .17
6.3 Line thickness .17
6.4 Spacing .19
6.5 Angles .19
6.6 Filled areas .19
6.7 Symbol original with arrows.19
6.8 Character symbols.19
6.9 Negation.19
7 Basic pattern .21
7.1 Structure .21
7.2 Application of the basic pattern .23
7.3 Specification of symbol original.25
8 Application of symbol originals .27
9 Creation procedure .27
10 Designation systems.27
Bibliography .31

---------------------- Page: 4 ----------------------

SIST IEC 80416-1:2002
80416-1  IEC:2001 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS
FOR USE ON EQUIPMENT –
Part 1: Creation of symbol originals
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this international standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 80416-1 has been prepared by IEC subcommittee 3C: Graphical
symbols for use on equipment, of IEC technical committee 3: Information structures,
documentation and graphical symbols.
This International Standard has been prepared in co-operation with ISO/TC145.
This standard replaces ISO 3461-1 (1988) and IEC 60416 (1988).
The text of this standard is based on the following documents:
FDIS Report on voting
3C/600/FDIS 3C/654/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
In order to collect all requirements concerning relevant basic principles within one single
numerical series, ISO technical committee 145: Graphical symbols and IEC technical
committee 3 agreed to publish all parts of this International Standard within the 80416 series.
The Technical Management Board of ISO and the Committee of Action of IEC have decided
that, for each part of this series, one organisation shall be chosen responsible. The technical
committees involved have agreed not to change any part of International Standard 80416
without mutual agreement.

---------------------- Page: 5 ----------------------

SIST IEC 80416-1:2002
80416-1  IEC:2001 – 7 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.
International Standard 80416 consists of the following parts, under the general title Basic
principles for graphical symbols for use on equipment:
Part 1: 2001, Creation of symbol originals (published by IEC)
Part 2: 2001, Form and use of arrows (published by ISO)
Part 3, Guidelines for the application of graphical symbols (being prepared,
and to be published by IEC)
Part 4, Supplementary guidelines for the adaptation of graphical symbols for
use on screen and displays (icons) (under consideration)
The committee has decided that the contents of this publication will remain unchanged until
2003. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 6 ----------------------

SIST IEC 80416-1:2002
80416-1  IEC:2001 – 9 –
Introduction
A graphical symbol is a visually perceptible figure used to transmit information independently of
language. Graphical symbols are used on equipment for a wide range of purposes. For such
symbols, consistency in the design of families of symbols used in one location or on similar
equipment is an important issue, as is legibility when these symbols are reduced to small
dimensions. Thus, there is a need to standardize the principles for creating graphical symbols
for use on equipment to ensure visual clarity, to maintain consistency and thereby to improve
recognition.
This multi-part standard addresses the basic rules used to create graphical symbols for use on
equipment, including line widths, form and use of arrows, negation elements, and use of the
basic pattern which serves as a guideline for drawing equipment symbols. These design
principles are required to be used for all graphical symbols for use on equipment: the
standardized graphical symbols of which are found in ISO 7000 and IEC 60417.

---------------------- Page: 7 ----------------------

SIST IEC 80416-1:2002
80416-1  IEC:2001 – 11 –
BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS
FOR USE ON EQUIPMENT –
Part 1: Creation of symbol originals
1 Scope
International Standard 80416 series provides principles and guidelines for the creation of
symbol originals and the application of graphical symbols for use on equipment prepared within
ISO and IEC.
This Part 1 of the standard specifies the key principles for the creation of symbol originals for
use on equipment. In accordance with the intended meaning of the symbol originals, it contains
rules for design such as shape and size, and also for preparation of the accompanying texts.
This standard applies to graphical symbols used:
- to identify the equipment or a part of the equipment (for example, a control or display);
- to indicate functional states or functions (for example, on, off, alarm);
- to designate connections (for example, terminals, filling points);
- to provide information on packaging (for example, identification of content, instructions
for handling);
- to provide instructions for the operation of the equipment (for example, Iimitations of
use).
This standard does not apply to symbol originals for:
- safety signs;
- use on drawings and diagrams;
- use in technical documentation of products and in technical product documentation;
- use for public information.
2 Normative references
The following normative documents contain provisions which, through reference in this text,
constitute provisions of this International Standard. For dated references, subsequent
amendments to, or revisions of, any of these publications do not apply. However, parties to
agreements based on this International Standard are encouraged to investigate the possibility
of applying the most recent editions of the normative documents indicated below. For undated
references, the latest edition of the normative document referred to applies. Members of IEC
and ISO maintain registers of currently valid International Standards.
ISO 80416-2:2001, Basic principles for graphical symbols for use on equipment – Part 2: Form
and use of arrows
ISO 7000, Graphical symbols for use on equipment – Index and synopsis

---------------------- Page: 8 ----------------------

SIST IEC 80416-1:2002
80416-1  IEC:2001 – 13 –
IEC 60417-1, Graphical symbols for use on equipment – Part 1: Overview and application
IEC 60417-2, Graphical symbols for use on equipment – Part 2: Symbol originals
ISO 3864, Safety colours and safety signs
3 Definitions
For the purpose of this International Standard, the following definitions apply.
3.1
graphical symbol
visually perceptible figure with a particular meaning used to transmit information independently
of language
3.2
graphical symbol element
part of a symbol original with a particular meaning
NOTE 1 Letters, numerals, punctuation marks and mathematical symbols may be used as graphical symbol
elements (see ISO 31 and IEC 60027).
NOTE 2 A graphical symbol element with a specific meaning may be used to provide a common concept in the
construction of a symbol family.
3.3
symbol original
drawing of a graphical symbol, prepared in accordance with this standard, used for reference
or reproduction purposes
3.4
corner marking
part of a symbol original, four of which define the frame of the symbol original; see 7.3 and
figure 8
3.5
title
unique name by which a graphical symbol is identified and spoken of
NOTE The title should be as short as possible; it is only intended to provide a unique name for the graphical
symbol and not to describe its application.
3.6
description
normative text attached to the graphical representation of the symbol original which defines the
p
...