Steel castings - Steel castings for general engineering uses

This document applies to steel castings:   for general engineering uses. Its uses include machinery (mechanical, electrical...), automotive industries, railroad, armament, agricultural equipment, mining. In cases where castings are joined by welding by the founder, this document applies. In cases where castings are welded:   to wrought products (plates, tubes, forgings...), or   by non founders this document does not apply.

Stahlguss - Stahlguss für allgemeine Anwendungen

Dieses Dokument gilt für Stahlguss
-   für allgemeine Anwendungen. Die Verwendung schließt Maschinen (mechanisch, elektrisch, ...), Kraftfahrzeugindustrie, Eisenbahnen, Rüstung, Landmaschinen, Bergbau,... ein.
In Fällen, in denen Gussstücke vom Gießer zusammengeschweißt werden, gilt dieses Dokument.
In Fällen, in denen Gussstücke geschweißt werden
-   zusammen mit umformbaren Erzeugnissen (Bleche, Rohre, Schmiedestücke, ...) oder
-   von anderen als Gießern
gilt dieses Dokument nicht.

Aciers moulés - Aciers moulés d'usage général

Le présent document s’applique aux aciers moulés utilisés :
-   en mécanique générale. Leur utilisation inclut l’équipement (mécanique, électrique…), l’industrie automobile, le ferroviaire, l’armement, les équipements agricoles, l’industrie minière…
Le présent document s’applique aux cas où les pièces moulées sont assemblées par soudage par le fondeur.
Le présent document ne s’applique pas aux cas où les pièces moulées sont soudées :
-   à des produits corroyés (tôles, tubes, pièces forgées …) ; ou
-   par des non-fondeurs.

Jekleni ulitki - Jekleni ulitki za splošne tehnične namene

Ta dokument se uporablja za jeklene ulitke za splošne tehnične namene. Nameni uporabe zajemajo stroje (mehanske, električne ...), avtomobilsko industrijo, železnico, vojno opremo, kmetijsko opremo, rudarstvo. Ta dokument se uporablja v primerih, ko spajanje ulitkov z varjenjem izvaja livar. Kadar se ulitke vari na gnetene zlitine (plošče, cevi, kovane predmete ...) ali ko to izvajajo druge osebe, ki niso livarji, se ta dokument ne uporablja.

General Information

Status
Published
Public Enquiry End Date
24-Apr-2012
Publication Date
30-Mar-2015
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
17-Mar-2015
Due Date
22-May-2015
Completion Date
31-Mar-2015

Relations

Buy Standard

Standard
EN 10293:2015
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahlguss - Stahlguss für allgemeine AnwendungenAciers moulés - Aciers moulés d'usage généralSteel castings - Steel castings for general engineering uses77.140.80Železni in jekleni ulitkiIron and steel castingsICS:Ta slovenski standard je istoveten z:EN 10293:2015SIST EN 10293:2015en,fr,de01-maj-2015SIST EN 10293:2015SLOVENSKI
STANDARDSIST EN 10293:2005/AC:2008SIST EN 10293:20051DGRPHãþD



SIST EN 10293:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10293
January 2015 ICS 77.140.80 Supersedes EN 10293:2005English Version
Steel castings - Steel castings for general engineering uses
Aciers moulés - Aciers moulés d'usage général
Stahlguss - Stahlguss für allgemeine Anwendungen This European Standard was approved by CEN on 5 December 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10293:2015 ESIST EN 10293:2015



EN 10293:2015 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 v 3 Terms and definitions .5 • 4 Information to be supplied by the purchaser .5 5 Designation .5 6 Manufacture .5 6.1 Manufacturing process .5 v 6.1.1 Melting .5 6.1.2 Heat treatment .5 6.2 Welding operations.6 v 6.2.1 General .6 6.2.2 Production welding.6 v 6.3 Further processing .6 7 Requirements .6 v 7.1 General .6 7.2 Material .6 7.2.1 Chemical composition .6 7.2.2 Mechanical properties .9 •• 7.2.3 Other properties (magnetic properties) . 15 7.3 Casting . 15 v 7.3.1 Chemical composition . 15 7.3.2 Mechanical properties . 15 v 7.3.3 Non-destructive testing . 15 v 7.3.4 Conditions of the casting . 15 v 7.3.5 Mass of the casting. 15 v 7.3.6 Additional requirements regarding the condition of the casting . 15 8 Inspection . 15 v 8.1 General . 15 v 8.2 Type of inspection document and type of inspection . 15 v 8.3 Test unit . 15 v 8.4 Samples . 15 8.5 Test procedures . 16 v 8.6 Invalidation of test results . 16 v 8.7 Retests . 16 v 8.8 Sorting and reprocessing . 16 v 9 Marking . 16 v 10 Packaging and surface protection . 16 v 11 Complaints . 16 Annex A (informative) Guidance data for welding . 17 Bibliography . 19
SIST EN 10293:2015



EN 10293:2015 (E) 3 Foreword This document (EN 10293:2015) has been prepared by Technical Committee ECISS/TC 111 “Steel castings and forgings”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2015 and conflicting national standards shall be withdrawn at the latest by July 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 10293:2005. In comparison with EN 10293:2005, the following significant technical changes were made: — Alignment with the structure of EN 1559-1:2011, "Founding - Technical conditions of delivery - Part 1: General" and EN 1559-2:2014 "Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings"; — New grades (GE270, GE320 and GE360) added. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 10293:2015



EN 10293:2015 (E) 4 Introduction This document retains the same format for clauses as EN 1559-1:2011 and EN 1559-2:2014. It should be used in conjunction with these standards. Where no text is given under a paragraph heading, the corresponding paragraph of EN 1559-1:2011 and EN 1559-2:2014 applies. The structure of this document is as follows: — clauses and subclauses preceded by v indicates no additional conditions to EN 1559-11) and EN 1559-21) ; — clauses and subclauses marked with a single dot • indicate that the conditions shall be agreed at the time of enquiry and order; — subclauses marked with two dots •• indicate that conditions may be agreed at the time of enquiry and order (optional); — subclauses without dot marking are mandatory.
1) When a complementary information is given in a clause or subclause of this document (versus the same clause or subclause of EN 1559-1:2011 or EN 1559-2:2014) it is preceded by “in addition to EN 1559-2:2014”. SIST EN 10293:2015



EN 10293:2015 (E) 5 1 Scope This European Standard applies to steel castings: — for general engineering uses. Its uses include machinery (mechanical, electrical.), automotive industries, railroad, armament, agricultural equipment, mining, etc. In cases where castings are joined by welding by the founder, this document applies. In cases where castings are welded: — to wrought products (plates, tubes, forgings.), or — by non-founders, this document does not apply. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1559-2:2014, Founding — Technical conditions of delivery — Part 2: Additional requirements for steel castings v 3 Terms and definitions • 4 Information to be supplied by the purchaser In cases of grades with different mechanical properties relating to heat treatment conditions the purchaser shall specify the heat treatment symbol (see Clause 5). 5 Designation In addition to EN 1559-2:2014: — for a steel grade which can be delivered to different strength levels, according to the heat treatment, a suffix shall be added in accordance with Table 3. For example: G26CrMo4 +QT1. 6 Manufacture 6.1 Manufacturing process v 6.1.1 Melting 6.1.2 Heat treatment Unless otherwise agreed, the type of heat treatment shall comply with Table 3. SIST EN 10293:2015



EN 10293:2015 (E) 6 6.2 Welding operations v 6.2.1 General 6.2.2 Production welding In addition to EN 1559-2:2014: — information on preheat and interpass temperatures as well as on postweld heat-treatment and the corresponding welding groups as defined in EN ISO 11970 is given in Annex A. v 6.3 Further processing 7 Requirements v 7.1 General 7.2 Material 7.2.1 Chemical composition In addition to EN 1559-2:2014: — the chemical composition determined by a cast analysis shall conform to the values given in Table 1; — elements unspecified in Table 1 of this document shall not be intentionally added without agreement of the purchaser other than for the purpose of finishing the heat. If not otherwise agreed the maximum values in % (by mass) given in Table 2 shall be applicable; — permissible deviations between the specified cast analysis and the product analysis are indicated in Table 1 of EN 1559-2:2014. SIST EN 10293:2015



EN 10293:2015 (E) 7 Table 1 — Chemical composition (cast analysis), (% by mass) Designation C Si Mn P S Cr Mo Ni V W Name Number min. max. max. min. max. max. max. min. max. min. max. min. max. min. max. max GE200 1.0420 - - - - - 0,035 0,030 - - - - - - - - - GS200 1.0449 - 0,18 0,60 - 1,20 0,030 0,025 - - - - - - - - - GE240 1.0446 - - - - - 0,035 0,030 - - - - - - - - - GS240 1.0455 - 0,23 0,60 - 1,20 0,030 0,025 - - - - - - - - - GE270 1.0454 - - - - - 0,035 0,030 - - - - - - - - - GE300 1.0558 - - - - - 0,035 0,030 - - - - - - - - - GE320 1.0591 - - - - - 0,035 0,030 - - - - - - - - - GE360 1.0597 - - - - - 0,035 0,030 - - - - - - - - - G17Mn5 1.1131 0,15 0,20 0,60 1,00 1,60 0,020 a 0,020 b -- - - - - - - - - G20Mn5 1.6220 0,17 0,23 0,60 1,00 1,60 0,020 a 0,020 b - - - - - 0,80 - - - G24Mn6 1.1118 0,20 0,25 0,60 1,50 1,80 0,020 a 0,015 - - - - - - - - - G28Mn6 1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.