iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 10249-1:1998

(Main)

Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions

Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions

This part of this European Standard specifies the requirements for cold formed non alloy steel sheet piling produced from hot rolled strip or sheet with a thickness equal to or greater than 2mm in respect of its chemical composition, mechanical and technological properties and delivery conditions. The products specified are for general, structural and civil engineering works. Requirements concerning the tolerances on shape and dimensions are specified in Part 2 of this European Standard.

Kaltgeformte Spundbohlen aus unlegierten Stählen - Teil 1: Technische Lieferbedingungen

Dieser Teil der Europäischen Norm enthält die Anforderungen an kaltgeformte, unlegierte Stahlspundbohlen aus warmgewalztem Band oder Blech mit einer Dicke >= 2mm hinsichtlich ihrer chemischen Zusammensetzung, mechanischen und technologischen Eigenschaften und Lieferbedingungen. Die Erzeugnisse nach dieserEuropäischen Norm eignen sich für allgemeine Zwecke, Stahlbau und Tiefbauarbeiten. Die Festlegungen für die Grenzabmaße und Formtoleranzen sind im Teil 2 dieser Europäischen Norm enthalten.

Palplanches profilées a froid en aciers non alliés - Partie 1: Conditions techniques de livraison

La présente partie de cette norme européenne spécifie les prescriptions relatives a la composition chimique, aux caractéristiques mécaniques et technologiques et aux conditions de livaison pour les palplanches profilées a froid en aciers non alliés, fabriquées a partir de bandes ou tôles laminées a chaud d'épaisseur égale ou supérieure a 2mm. Les produits spécifiés sont destinés a etre utilisés dans la réalisation d'ouvrages divers, d'ouvrages de génie civil et d'éléments de construction.

Hladno oblikovana obešala iz nelegiranih jekel - 1. del: Tehnični dobavni pogoji

General Information

Status
Published
Publication Date
31-Jul-1998
ICS
77.140.45 - Non-alloyed steels
77.140.70 - Steel profiles
Technical Committee
IFEK - Ferrous metals
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Aug-1998
Due Date
01-Aug-1998
Completion Date
01-Aug-1998
Ref Project
EN 10249-1:1995 - Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions

Relations

Revises
oSIST prEN 10249-1:2006 - Cold formed steel sheet piling - Part 1: Technical delivery conditions
Effective Date
18-Jan-2023
Revised
oSIST prEN 10249-1:2006 - Cold formed steel sheet piling - Part 1: Technical delivery conditions
Effective Date
22-Dec-2008
Revises
kSIST FprEN 10249-1:2022 - Cold formed steel sheet piles - Part 1: Technical delivery conditions
Effective Date
18-Jan-2023
Revises
oSIST prEN 10249-1:2006 - Cold formed steel sheet piling - Part 1: Technical delivery conditions
Effective Date
19-Jan-2023
Revises
kSIST FprEN 10249-1:2022 - Cold formed steel sheet piles - Part 1: Technical delivery conditions
Effective Date
19-Jan-2023
Revised
kSIST FprEN 10249-1:2022 - Cold formed steel sheet piles - Part 1: Technical delivery conditions
Effective Date
16-Dec-2020

Buy Standard

EN 10249-1:1998EN 10249-1:1998
PreviousNext
Standard
EN 10249-1:1998
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kaltgeformte Spundbohlen aus unlegierten Stählen - Teil 1: Technische LieferbedingungenPalplanches profilées a froid en aciers non alliés - Partie 1: Conditions techniques de livraisonCold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions77.140.70Jekleni profiliSteel profiles77.140.45Nelegirana jek
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 10248-1:2023(Main)
Hot-rolled steel sheet piles - Part 1: Technical delivery conditions
EN 10248-1:2023

This document specifies the requirements for hot rolled steel sheet piles in respect of its chemical composition, mechanical properties and conditions of delivery. The products specified are for general, structural and civil engineering works. The types of steel sheet piles covered by this standard are: Z-shaped, U-shaped, straight web, H-shaped with their interlocking bars

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10219-3:2020(Main)
Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels
EN 10219-3:2020

This part of this standard specifies the technical delivery conditions for electric welded and submerged arc welded cold formed structural steel hollow sections for mechanical engineering purposes of circular, square, rectangular or elliptical forms and applies to structural hollow sections formed cold without subsequent heat treatment other than the heat treatment of the weld line.
NOTE 1   The requirements for tolerances, dimensions and sectional properties can be found in EN 10219-2.
NOTE 2   The attention of users is drawn to the fact that whilst cold formed grades in EN 10219-3 can have equivalent mechanical properties to hot-finished grades in EN 10210-3 the sectional properties of square and rectangular hollow sections in EN 10219-2 and EN 10210-2 are not equivalent.
NOTE 3   A range of steel grades is specified in this document and the user can select the grade most appropriate to the intended use and service conditions. The grades and mechanical properties, but not the final supply condition of cold formed hollow sections are generally comparable with those in EN 10025-2, EN 10025-3, EN 10025-4, EN 10025-5, EN 10025-6, EN 10149-2 and EN 10149-3.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10219-2:2019(Main)
Cold formed welded steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
EN 10219-2:2019

This part of prEN 10219 specifies tolerances for cold formed welded circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 40 mm, in the following size ranges:
Circular: Outside diameters up to 2 500 mm
Square: Outside dimensions up to 500 mm x 500 mm
Rectangular: Outside dimensions up to 500 mm x 300 mm
Elliptical: Outside dimensions up to 480 mm x 240 mm
The formulae for calculating sectional properties of sections manufactured to the dimensional tolerances of this standard, to be used for the purposes of structural design, are given in Annex B.
Dimensions and sectional properties for a limited range of more common sizes are given in Annex C.
The general conditions are specified in prEN 10219-1 (product characteristics, test methods and performance criteria that apply under the Construction Products Regulations) and the technical delivery conditions in prEN 10219-2.
NOTE   The designation of the sections' major axis (yy) and its minor axis (zz) align with the axis designation used for structural design in the structural Eurocodes.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10210-2:2019(Main)
Hot finished steel structural hollow sections - Part 2: Tolerances, dimensions and sectional properties
EN 10210-2:2019

This part of prEN 10210 specifies tolerances for hot finished circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 120 mm, in the following size ranges:
Circular: Outside diameters up to 2 500 mm
Square: Outside dimensions up to 800 mm x 800 mm
Rectangular: Outside dimensions up to 750 mm x 500 mm
Elliptical: Outside dimensions up to 500 mm x 250 mm
The formulae for calculating sectional properties of sections manufactured to the dimensional tolerances of this standard, to be used for the purposes of structural design, are given in Annex A.
Dimensions and sectional properties for a limited range covering the more common sizes are given in Annex B.
The general conditions are specified in prEN 10210-1 (product characteristics, test methods and performance criteria that apply under the Construction Products Regulations) and the technical delivery conditions in prEN 10210-2.
NOTE   The designation of the sections' major axis (yy) and its minor axis (zz) align with the axis designation used for structural design in the structural Eurocodes.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10219-1:2006(Main)
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10219-1:2006

This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.
Requirements for tolerances, dimensions and sectional properties are contained in EN 10219-2.
NOTE   A range of steel grades is specified in this European Standard and the user should select the grade appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are compatible with those in EN 10025-2 and EN 10025-3.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10210-1:2006(Main)
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10210-1:2006

This part of this European Standard specifies technical delivery conditions for hot finished hollow sections of circular, square, rectangular or elliptical forms and applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.
Requirements for tolerances, dimensions and sectional properties are contained in EN 10210-2.
NOTE   A range of material grades is specified in this standard and the user should select the grade appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are compatible with those in EN 10025-2 and EN 10025-3.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10248-2:1998(Main)
Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
EN 10248-2:1995

This part of this European standard specifies the tolerances on dimensions, squareness of ends, straightness and mass of hot rolled non alloy steel sheet piles which are defined in EN 10248-1.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10249-2:1998(Main)
Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
EN 10249-2:1995

This part of this European Standard specifies the tolerances on dimensions, squareness of ends, straightness and mass of cold formed non alloy steel sheet piles which are defined in EN 10249-1.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 10210-2:2016(Main)
Hot finished structural steel hollow sections - Part 2: Technical delivery conditions
prEN 10210-1 rev

This part of this European Standard specifies technical delivery conditions for hot-finished seamless, electric welded and submerged arc welded steel structural hollow sections of circular, square, rectangular or elliptical forms.
It applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment above 580 °C to obtain equivalent mechanical conditions to those obtained in the hot formed product.
The general conditions (product characteristics, test methods and performance criteria that apply under the Construction Products Regulations) are specified in prEN 10210-1 and the requirements for tolerances, dimensions and sectional properties in prEN 10210-3.
NOTE 1    prEN 10210-1 covers provision of the Construction Products Regulations (CPR) to fulfil European law for construction products. The technical delivery conditions are described within prEN 10210-2 in combination with Clauses 2, 3, 4, 5, 7 and 8 of prEN 10210-1.
NOTE 2   The attention of users is drawn to the fact that whilst cold formed grades in prEN 10219-2 can have equivalent mechanical properties to hot-finished grades in prEN 10210-2 the sectional properties of square and rectangular hollow sections in prEN 10210-3 and prEN 10219-3 are not equivalent.
NOTE 3   A range of material grades is specified in this standard and the user should select the grade most appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are comparable with those in EN 10025-2, EN 10025-3, EN 10025-4, EN 10025-5 and EN 10025-6.
NOTE 4   Seamless and welded hollow sections for offshore structures are covered in EN 10225.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 10219-1:2016(Main)
Cold formed welded structural steel hollow sections - Part 1: General
prEN 103XY

This part of prEN 10219 specifies the product characteristics, test methods and performance criteria for electric welded and submerged arc welded cold formed structural steel hollow sections of circular, square, rectangular or elliptical forms, produced without any subsequent heat treatment other than the heat treatment of the weld line.
Requirements for the technical delivery conditions are specified in prEN 10219-2 and for tolerances, dimensions and sectional properties in prEN 10219-3.
NOTE 1    prEN 10219-1 covers provision of the Construction Products Regulations (CPR) to fulfil European law for construction products. The technical delivery conditions are described within prEN 10219-2 in combination with Clauses 2, 3, 4, 5, 7 and 8 of prEN 10219-1.
NOTE 2   Hollow sections for offshore structures are covered in EN 10225.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day