SIST EN IEC 63044-6:2021
(Main)General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 6: Requirements for planning and installation
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 6: Requirements for planning and installation
This document specifies the requirements for planning and installation of HBES/BACS and the
supporting infrastructure.
Radio frequency (RF) HBES/BACS are also considered.
Safety requirements are covered by IEC 60364 (all parts).
Information and communication technology (ICT) and broadcasting and communication
technology (BCT) network installations are typically interfaced with HBES/BACS.
The requirements for ICT and BCT network installations are covered by ISO/IEC 14763-2.
This document does not cover HBES/BACS implementation with:
– optical fibre,
– power lines,
– power over Ethernet (PoE).
Allgemeine Anforderungen an die Elektrische Systemtechnik für Heim und Gebäude (ESHG) und an Systeme der Gebäudeautomation (GA) - Teil 6: Anforderungen für Planung und Installation
Systèmes électroniques pour les foyers domestiques et les bâtiments (HBES) et systèmes de gestion technique du bâtiment (SGTB) - Partie 6: Exigences de planification et d’installation
L'IEC 63044-6:2021 spécifie les exigences de planification et d'installation de HBES/SGTB et de l'infrastructure support.
Les radiofréquences (RF) HBES/SGTB sont également prises en considération.
Les exigences de sécurité sont couvertes par la série IEC 60364 (toutes les parties).
Les installations de réseau ICT et BCT sont en général interfacées avec HBES/SGBT.
Les exigences relatives aux installations de réseau ICT et BCT sont couvertes par l'ISO/IEC 14763-2.
Le présent document ne couvre pas la mise en œuvre HBES/SGTB avec:
- fibres optiques,
- lignes d'énergie,
- alimentation électrique par câble Ethernet (PoE).
Splošne zahteve za stanovanjske in stavbne elektronske sisteme (HBES) in sisteme za avtomatizacijo in krmiljenje stavb (BACS) - 6. del: Zahteve za načrtovanje in namestitev
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 63044-6:2021
01-november-2021
Nadomešča:
SIST EN 50491-6-1:2014
Splošne zahteve za stanovanjske in stavbne elektronske sisteme (HBES) in
sisteme za avtomatizacijo in krmiljenje stavb (BACS) - 6. del: Zahteve za
načrtovanje in namestitev
General requirements for Home and Building Electronic Systems (HBES) and Building
Automation and Control Systems (BACS) - Part 6: Requirements for planning and
installation
Allgemeine Anforderungen an die Elektrische Systemtechnik für Heim und Gebäude
(ESHG) und an Systeme der Gebäudeautomation (GA) - Teil 6: Anforderungen für
Planung und Installation
Systèmes électroniques pour les foyers domestiques et les bâtiments (HBES) et
systèmes de gestion technique du bâtiment (SGTB) - Partie 6: Exigences de planification
et d’installation
Ta slovenski standard je istoveten z: EN IEC 63044-6:2021
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
SIST EN IEC 63044-6:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 63044-6:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 63044-6:2021
EUROPEAN STANDARD EN IEC 63044-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2021
ICS 29.120.01; 29.120.99 Supersedes EN 50491-6-1:2014 and all of its
amendments and corrigenda (if any)
English Version
Home and building electronic systems (HBES) and building
automation and control systems (BACS) - Part 6: Requirements
for planning and installation
(IEC 63044-6:2021)
Systèmes électroniques pour les foyers domestiques et les Allgemeine Anforderungen an die Elektrische
bâtiments (HBES) et systèmes de gestion technique du Systemtechnik für Heim und Gebäude (ESHG) und an
bâtiment (SGTB) - Partie 6: Exigences de planification et Systeme der Gebäudeautomation (GA) - Teil 6:
d'installation Anforderungen für Planung und Installation
(IEC 63044-6:2021) (IEC 63044-6:2021)
This European Standard was approved by CENELEC on 2021-08-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63044-6:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 63044-6:2021
EN IEC 63044-6:2021 (E)
European foreword
The text of document 23/972/FDIS, future edition 1 of IEC 63044-6, prepared by IEC/TC 23 “Electrical
accessories” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 63044-6:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–05–03
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–08–03
document have to be withdrawn
This document supersedes EN 50491-6-1:2014 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63044-6:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60364-5-52 NOTE Harmonized as HD 60364-5-52
1 2
IEC 60364-7-716 NOTE Harmonized as HD 60364-7-716
IEC 60670-1 NOTE Harmonized as EN IEC 60670-1
IEC 60715 NOTE Harmonized as EN 60715
IEC 63044-5-1 NOTE Harmonized as EN IEC 63044-5-1
IEC 63044-5-2 NOTE Harmonized as EN IEC 63044-5-2
1
To be published. Stage at the time of publication: IEC CDV 60364-7-716:2021.
2
To be published. Stage at the time of publication: prHD 60364-7-716:2020.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 63044-6:2021
EN IEC 63044-6:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60364-4-41 - Low-voltage electrical installations - Part HD 60364-4-41 -
4–41: Protection for safety - Protection
against electric shock
IEC 60364-4-44 - Low-voltage electrical installations - Part HD 60364-4-442 -
4–44: Protection for safety - Protection
against voltage disturbances and
electromagnetic disturbances
IEC 60364-5-54 - Low-voltage electrical installations - Part HD 60364-5-54 -
5–54: Selection and erection of electrical
equipment - Earthing arrangements and
protective conductors
IEC 61386-24 - Conduit systems for cable management - EN 61386-24 -
Part 24: Particular requirements - Conduit
systems buried underground
IEC 63044-1 - Home and Building Electronic Systems EN 63044-1 -
(HBES) and Building Automation and
Control Systems (BACS) - Part 1: General
requirements
IEC 63044-3 - Home and Building Electronic Systems EN IEC 63044-3 -
(HBES) and Building Automation and
Control Systems (BACS) - Part 3: Electrical
safety requirements
IEC 63044-4 - Home and building electronic systems -EN IEC 63044-4 -
(HBES) and building automation and
control systems (BACS) - Part 4: General
functional safety requirements for products
intended to be integrated in HBES and
BACS
IEC 63044-5 series Home and Building Electronic Systems EN IEC 63044-5 series
(HBES) and Building Automation and
Control Systems (BACS) - Part 5: EMC
requirements
3
---------------------- Page: 5 ----------------------
SIST EN IEC 63044-6:2021
EN IEC 63044-6:2021 (E)
ISO/IEC 11801-1 - Information technology - Generic cabling - -
for customer premises - Part 1: General
requirements
ISO/IEC 14763-2 - Information technology - Implementation - -
and operation of customer premises
cabling - Part 2: Planning and installation
4
---------------------- Page: 6 ----------------------
SIST EN IEC 63044-6:2021
IEC 63044-6
®
Edition 1.0 2021-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Home and building electronic systems (HBES) and building automation and
control systems (BACS) –
Part 6: Requirements for planning and installation
Systèmes électroniques pour les foyers domestiques et les bâtiments (HBES) et
systèmes de gestion technique du bâtiment (SGTB) –
Partie 6: Exigences de planification et d’installation
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.01; 29.120.99 ISBN 978-2-8322-9899-2
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 63044-6:2021
– 2 – IEC 63044-6:2021 © IEC 2021
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Abbreviated terms . 9
4 Home/building networks. 9
5 Home/building network model and general requirements . 10
6 Infrastructure requirements . 11
6.1 Infrastructure requirements for wired HBES/BACS . 11
6.1.1 Installation spaces for wired HBES/BACS . 11
6.1.2 Cohabitation of HBES/BACS and power cables . 17
6.1.3 Infrastructure requirements for outdoor wired HBES/BACS . 19
6.2 Infrastructure requirements for RF HBES/BACS . 20
7 Cable for HBES/BACS . 21
8 Electrical safety and functional safety . 21
8.1 Electrical safety . 21
8.2 Functional safety . 22
9 EMC . 22
10 Earthing and bounding . 22
11 Fire reaction and resistance requirements . 22
12 Environmental aspects . 22
13 Installation documentation . 22
Annex A (informative) Guidelines on HBES/BACS installation in existing buildings . 23
Annex B (informative) Installation guidelines for typical HBES/BACS applications . 24
B.1 General . 24
B.2 Installation guidelines . 24
B.2.1 Lighting and shutter control . 24
B.2.2 Temperature control . 24
B.2.3 Intrusion and technical alarm detection . 26
Annex C (informative) Administration and documentation. 32
C.1 Installation documentation . 32
C.2 Instructions for use . 32
C.3 Installer manual . 32
Annex D (informative) Inspection and tests . 34
D.1 General . 34
D.2 HBES/BACS operation . 34
D.3 Checks record . 34
D.4 HBES/BACS Installation Inspection Schedule . 36
Annex E (informative) Applications and clusters of services for HBES/BACS . 38
Bibliography . 39
---------------------- Page: 8 ----------------------
SIST EN IEC 63044-6:2021
IEC 63044-6:2021 © IEC 2021 – 3 –
Figure 1 – General topology of home/building network showing ICT, BCT, HBES/BACS
networks . 10
Figure 2 – Installation spaces . 12
Figure 3 – Infrastructure for buildings . 12
Figure 4 – Horizontal infrastructure (floor distribution) . 13
Figure 5 – Example of infrastructure for ICT and BCT cabling for a flat . 14
Figure 6 – Example of infrastructure for HBES network for a flat . 15
Figure 7 – Example of allocation of installation spaces (IS5, IS6). 15
Figure 8 – Indicative installation height for the most common HBES/BACS devices . 17
Figure 9 – Underground pathways . 19
Figure 10 – Depth of underground pathways . 19
Figure 11 – Example of pathway planning to guarantee the respect of minimum
bending radii (R): 0,5 m if no related information is provided by the cable manufacturer . 20
Figure 12 – Example of RF HBES/BACS with components supplied with power cables
and batteries or energy harvesting . 21
Figure B.1 – Zone temperature control concept . 25
Figure B.2 – Recommendations on temperature sensor positioning . 25
Figure B.3 – Example of home cabinet for heating flow control valves . 26
Figure B.4 – Examples of external detecting sensors (1 of 2) . 27
Figure B.5 – Examples of internal detecting sensors and basic installation rules . 29
Figure B.6 – Examples of common mistakes in positioning internal sensors . 30
Figure B.7 – Example of flooding detection . 31
Table 1 – EMC requirements for the cohabitation of the HBES/BACS and power cable . 18
Table 2 – Distances between pulling boxes versus type of cables . 20
Table E.1 – Applications and clusters of services for HBES/BACS . 38
---------------------- Page: 9 ----------------------
SIST EN IEC 63044-6:2021
– 4 – IEC 63044-6:2021 © IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND
BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) –
Part 6: Requirements for planning and installation
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 63044-6 has been prepared by IEC technical committee 23: Electrical accessories. It is an
International Standard.
The text of this International Standard is based on the following documents:
FDIS Report on voting
23/972/FDIS 23/974/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
---------------------- Page: 10 ----------------------
SIST EN IEC 63044-6:2021
IEC 63044-6:2021 © IEC 2021 – 5 –
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts in the IEC 63044 series, published under the general title Home and Building
Electronic Systems (HBES) and Building Automation and Control Systems (BACS), can be
found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.
---------------------- Page: 11 ----------------------
SIST EN IEC 63044-6:2021
– 6 – IEC 63044-6:2021 © IEC 2021
INTRODUCTION
A HBES/BACS network is part of the home/building network, which includes cabling for
information and communication technology (ICT) and broadcast communication technology
(BCT) applications. ISO/IEC 14763-2 is the specific standard for ICT and BCT cabling
installation and planning.
This document covers installation and planning requirements specific to a HBES/BACS network
in addition to safety requirements for electrical installations included in the IEC 60364 series.
Installation and planning specific requirements include:
– infrastructures for cabling,
– coexistence with electric wiring,
– hints for sensors.
Wireless systems are also considered. Planning the cabled backbone for wireless systems is
less complex compared to a full cabled network pathway, power supply cabling. Additional
provisions are provided to guarantee coverage and reliability.
---------------------- Page: 12 ----------------------
SIST EN IEC 63044-6:2021
IEC 63044-6:2021 © IEC 2021 – 7 –
HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND
BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) –
Part 6: Requirements for planning and installation
1 Scope
This document specifies the requirements for planning and installation of HBES/BACS and the
supporting infrastructure.
Radio frequency (RF) HBES/BACS are also considered.
Safety requirements are covered by IEC 60364 (all parts).
Information and communication technology (ICT) and broadcasting and communication
technology (BCT) network installations are typically interfaced with HBES/BACS.
The requirements for ICT and BCT network installations are covered by ISO/IEC 14763-2.
This document does not cover HBES/BACS implementation with:
– optical fibre,
– power lines,
– power over Ethernet (PoE).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60364-4-41, Low-voltage electrical installations – Part 4-41: Protection for safety –
Protection against electric shock
IEC 60364-4-44, Low-voltage electrical installations – Part 4-44: Protection for safety –
Protection against voltage disturbances and electromagnetic disturbances
IEC 60364-5-54, Low-voltage electrical installations – Part 5-54: Selection and erection of
electrical equipment – Earthing arrangements and protective conductors
IEC 63044-1, Home and Building Electronic Systems (HBES) and Building Automation and
Control Systems (BACS) – Part 1: General requirements
IEC 63044-3, Home and Building Electronic Systems (HBES) and Building Automation and
Control Systems (BACS) – Part 3: Electrical safety requirements
IEC 63044-4, Home and Building Electronic Systems (HBES) and Building Automation and
Control Systems (BACS) – Part 4: General functional safety requirements for products intended
to be integrated in HBES and BACS
---------------------- Page: 13 ----------------------
SIST EN IEC 63044-6:2021
– 8 – IEC 63044-6:2021 © IEC 2021
IEC 63044-5 (all parts), Home and Building Electronic Systems (HBES) and Building
Automation and Control Systems (BACS) – Part 5: EMC requirements
IEC 61386-24, Conduit systems for cable management – Part 24: Particular requirements –
Conduit systems buried underground
ISO/IEC 11801-1, Information technology – Generic cabling for customer premises – Part 1:
General requirements
ISO/IEC 14763-2, Information technology – Implementation and operation of customer
premises cabling – Part 2: Planning and installation
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 63044-1 and the
following apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1.1
BCT cabling
broadcast and communication technologies cabling
cabling system designed to support applications using the HF band (3 MHz to 30 MHz), the
VHF band (30 MHz to 300 MHz) and the UHF band (300 MHz to 3 000 MHz) for transmission
of sound radio, TV and two-way data services, as well as for in-home inter-networking, as
defined in ISO/IEC 11801-1
3.1.2
HBES/BACS application
single automated action performed by HBES/BACS (see definition 3.1.4)
Note 1 to entry: Applications are normally integrated to perform higher-level actions.
3.1.3
home/building network
network for digital and analogue information transport for a home or a building, providing
defined access points and using one or more media in any topology
3.1.4
ICT cabling
information and communication technologies cabling
cabling system designed to support applications using information and communication
technologies, as defined in ISO/IEC 11801-1
3.1.5
wired HBES/BACS
HBES/BACS with wired power and signals
3.1.6
RF HBES/BACS
HBES/BACS whose signals are exchanged by radio frequency; power can be wired or not
(e.g. battery)
---------------------- Page: 14 ----------------------
SIST EN IEC 63044-6:2021
IEC 63044-6:2021 © IEC 2021 – 9 –
3.2 Abbreviated terms
For the purposes of this document, the following abbreviated terms apply.
AV Audiovisual
BCT Broadcast and communication technologies
BO Broadcasting outlet
CO Control outlet
HD Home distributor
HF High frequency
HVAC Heating, ventilation, and air conditioning
ICT Information and communication technologies
IT Information technology
MATO Multi-application telecommunication outlet
RF Radio frequency
SHD Secondary home distributor
TO Telecommunications outlet
UHF Ultra high frequency
VHF Very high frequency
4 Home/building networks
The home/building networks:
– ensure the distribution of services, such as:
• communication,
• HBES/BACS;
– need components such as conduits, boxes, etc. as physical infrastructures for the system.
The implementation of the home/building network goes through the following steps:
– design,
– planning of physical infrastructure,
– installation.
The planning of a common physical infrastructure for HBES/BACS, ICT, and BCT and the
supporting power distribution network is advantageous for the following reasons:
– cost optimization through common works,
– optimization of the pathways,
– planning of common installation spaces for interfacing units,
– simplify the planning of spaces for future updates.
Specific requirements for the planning and the installation of a communication services generic
cabling infrastructure are given in ISO/IEC 14763-2. Requirements for the HBES/BACS physical
infrastructure are given in this document.
HBES/BACS networks can be wired, wireless or a combination of both and require a supporting
physical infrastructure. For example, wireless HBES/BACS are composed of the housing of the
device, the supporting power network, the positioning of interfacing modules, et
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.