SIST EN 2030:2014

Aerospace series - Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De ≤ 150 mm

This European Standard specifies the requirements relating to: Steel X105CrMo17 (1.3544) Hardened and tempered Bars De ≤ 150 mm for aerospace applications.

Luft- und Raumfahrt - Stahl X105CrMo17 (1.3544) - Gehärtet und Angelassen - Stangen - De ≤ 150 mm

Série aérospatiale - Acier X105CrMo17 (1.3544) - Trempé et revenu - Barres - De ≤ 150 mm

Cette Norme européenne spécifie les exigences relatives à :
Acier X105CrMo17 (1.3544)
Trempé et revenu
Barres
De ≤ 150 mm
pour applications aérospatiales.
NOTE   Autre désignation commune :   
   UNS : S44004,
   AISI : 440C, XDBD.

Aeronavtika - Jeklo X105CrMo17 (1.3544) - Utrjeno in kaljeno - Palice - De ≤ 150 mm

General Information

• Status: Published
• Publication Date: 10-Feb-2014
• ICS: 49.025.10 - Steels
• ICS: 49.035 - Components for aerospace construction
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 06-Jan-2014
• Due Date: 13-Mar-2014
• Completion Date: 11-Feb-2014
• Ref Project: EN 2030:2013 - Aerospace series - Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De ≤ 150 mm

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PPPP49.035Sestavni deli za letalsko in vesoljsko gradnjoComponents for aerospace construction49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 2030:2013SIST EN 2030:2014en01-marec-2014SIST EN 2030:2014SLOVENSKI
STANDARD



SIST EN 2030:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2030
December 2013 ICS 49.025.10 English Version
Aerospace series - Steel X105CrMo17 (1.3544) - Hardened and tempered - Bars - De ≤ 150 mm
Série aérospatiale - Acier X105CrMo17 (1.3544) - Trempé et revenu - Barres - De ≤ 150 mm
Luft- und Raumfahrt - Stahl X105CrMo17 (1.3544) - Gehärtet und Angelassen - Stangen - De ≤ 150 mm This European Standard was approved by CEN on 21 March 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2030:2013 ESIST EN 2030:2014



EN 2030:2013 (E) 2 Contents Page Foreword . 3 Introduction . 3 1 Scope . 5 2 Normative references . 5
SIST EN 2030:2014



EN 2030:2013 (E) 3 Foreword This document (EN 2030:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2014, and conflicting national standards shall be withdrawn at the latest by June 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
...