SIST EN 2585:2019
(Main)Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads
Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads
This document specifies the characteristics of spherical plain bearings in corrosion resisting steel, with self- lubricating liner, wide series, for elevated load at ambient temperature, with or without swaging groove, intended for use in the fixed or moving parts of the aircraft structure and control mechanisms.
They shall be used in the temperature range -55° C to +163° C.
Luft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung - Breite Reihe - Hohe Belastung bei Raumtemperatur - Maße und Belastungen
Série aérospatiale - Rotules en acier résistant à la corrosion à garniture autolubrifiante - Série large à charge elevée à température ambiante - Dimensions et charges
Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno oblogo - Široki tip - Serija za večje obremenitve pri okoljski temperaturi - Mere in nosilnosti
Ta dokument določa lastnosti širokih tipov kroglastih drsnih ležajev iz korozijsko odpornega jekla s samomazalno oblogo za večje obremenitve pri okoljski temperaturi, z zakovanim utorom ali brez njega, ki so namenjeni za uporabo v fiksnih ali premikajočih se delih ogrodja letala in nadzornih mehanizmih.
Uporabljati jih je treba v temperaturnem razponu –55 °C do 163 °C.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QRVLOQRVWLLuft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung - Breite Reihe - Hohe Belastung bei Raumtemperatur - Maße und BelastungenSérie aérospatiale - Rotules en acier résistant à la corrosion à garniture autolubrifiante - Série large à charge elevée à température ambiante - Dimensions et chargesAerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads49.035Sestavni deli za letalsko in vesoljsko gradnjoComponents for aerospace construction21.100.10Drsni ležajiPlain bearingsICS:Ta slovenski standard je istoveten z:EN 2585:2019SIST EN 2585:2019en,fr,de01-maj-2019SIST EN 2585:2019SLOVENSKI
STANDARDSIST EN 2585:2004SIST EN 2023:2001/AC1:2001SIST EN 2023:20011DGRPHãþD
SIST EN 2585:2019
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2585
February
t r s { ICS
v {ä r u w Supersedes EN
t r t uã s { z zá EN
t w z wã t r r sEnglish Version
Aerospace series æ Bearingá spherical plain in corrosion resisting steel with selfælubricating liner æ Wide series æ Elevated load at ambient temperature æ Dimensions and loads Sßrie aßrospatiale æ Rotule en acier rßsistant à la corrosion à garniture autolubrifiante æ Sßrie large æ Charge ßlevße à tempßrature ambiante æ Dimensions et charges
Luftæ und Raumfahrt æ Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung æ Breite Reihe æ Hohe Belastung bei Raumtemperatur æ Maße und Belastungen This European Standard was approved by CEN on
s u August
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s { CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
t w z wã t r s { ESIST EN 2585:2019
EN 2585:2019 (E) 2 Contents
Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Symbols and definitions . 4 4 Required characteristics . 5 4.1 Configuration, dimensions, tolerances and mass . 5 4.2 Surface roughness . 5 4.3 Loads and starting torques . 8 4.4 Materials . 8 4.5 Surface treatment on the inner ring solely . 8 5 Designation. 9 6 Marking . 9 7 Technical specification . 9 8 Quality management system . 10
(informative)
Standard evolution form . 11 Bibliography . 12
SIST EN 2585:2019
EN 2585:2019 (E) 3 European foreword This document (EN 2585:2019) has been prepared by the Aerospace and Defence Industries Association of Europe — Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2019, and conflicting national standards shall be withdrawn at the latest by August 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 2585:2001 and EN 2023:1988. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following coun
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.