SIST EN 63029:2018
(Main)Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Raster-graphics image-based e-books (IEC 63029:2017)
Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Raster-graphics image-based e-books (IEC 63029:2017)
This document specifies the scanning scheme to develop raster-graphics image-based ebooks
from existing printed books.
Audio-, Video- und Multimediasysteme, -Geräte und -Komponenten - Multimedia-E-Publishing und -E-Book-Technologien - Rastergrafikbasierte E-Books (IEC 63029:2017)
Systèmes et équipements audio, vidéo et multimédias - Technologies multimédias pour la publication au format numérique et les livres numériques - Livres numériques basés sur des images à balayage de trames (IEC 63029:2017)
L'IEC 63029:2017 spécifie un schéma de numérisation pour élaborer des livres électroniques à images matricielles à partir de livres imprimés existants.
Avdio, video in večpredstavnostni sistemi in oprema - Multimedijsko e-založništvo in e-tehnološka knjiga - E-knjige in slika rastrske grafike (IEC 63029:2017)
V tem dokumentu je določena shema skeniranja za razvijanje e-knjig z rastrsko-grafično podobo iz obstoječih tiskanih knjig.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 63029:2018
01-februar-2018
$YGLRYLGHRLQYHþSUHGVWDYQRVWQLVLVWHPLLQRSUHPD0XOWLPHGLMVNRH]DORåQLãWYR
LQHWHKQRORãNDNQMLJD(NQMLJHLQVOLNDUDVWUVNHJUDILNH,(&
Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-
book technologies - Raster-graphics image-based e-books (IEC 63029:2017)
Audio-, Video- und Multimediasysteme, -Geräte und -Komponenten - Multimedia-E-
Publishing und -E-Book-Technologien - Rastergrafikbasierte E-Books (IEC 63029:2017)
Systèmes et équipements audio, vidéo et multimédias - Technologies multimédias pour
la publication au format numérique et les livres numériques - Livres numériques basés
sur des images à balayage de trames (IEC 63029:2017)
Ta slovenski standard je istoveten z: EN 63029:2017
ICS:
33.160.01 Avdio, video in avdiovizualni Audio, video and audiovisual
sistemi na splošno systems in general
35.240.30 Uporabniške rešitve IT v IT applications in information,
informatiki, dokumentiranju in documentation and
založništvu publishing
SIST EN 63029:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 63029:2018
---------------------- Page: 2 ----------------------
SIST EN 63029:2018
EUROPEAN STANDARD EN 63029
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2017
ICS 33.160.99; 35.140; 35.240.30
English Version
Audio, video and multimedia systems and equipment -
Multimedia e-publishing and e-book technologies - Raster-
graphics image-based e-books
(IEC 63029:2017)
Systèmes et équipements audio, vidéo et multimédias - Audio-, Video- und Multimediasysteme, -Geräte und -
Technologies multimédias pour la publication au format Komponenten - Multimedia-E-Publishing und -E-Book-
numérique et les livres numériques - Livres numériques Technologien - Rastergrafikbasierte E-Books
basés sur des images à balayage de trames (IEC 63029:2017)
(IEC 63029:2017)
This European Standard was approved by CENELEC on 2017-08-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 63029:2017 E
---------------------- Page: 3 ----------------------
SIST EN 63029:2018
EN 63029:2017
European foreword
The text of document 100/2817/CDV, future edition 1 of IEC 63029, prepared by IEC/TC 100 "Audio,
video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 63029:2017.
The following dates are fixed:
• latest date by which the document has to be (dop) 2018-05-16
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-08-16
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 63029:2017 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 63029:2018
EN 63029:2017
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61966-2-1 - Multimedia systems and equipment - EN 61966-2-1 -
Colour measurement and management --
Part 2-1: Colour management - Default
RGB colour space - sRGB
ISO 12639 - Graphic technology -- Prepress digital data - -
exchange -- Tag image file format for
image technology (TIFF/IT)
3
---------------------- Page: 5 ----------------------
SIST EN 63029:2018
---------------------- Page: 6 ----------------------
SIST EN 63029:2018
IEC 63029
®
Edition 1.0 2017-07
INTERNATIONAL
STANDARD
colour
inside
Audio, video multimedia systems and equipment – Multimedia e-publishing and
e-book technologies – Raster-graphics image-based e-books
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.160.99; 35.140; 35.240.30 ISBN 978-2-8322-4490-6
Warning! Make sure that you obtained this publication from an authorized distributor.
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST EN 63029:2018
– 2 – IEC 63029:2017 IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Raster-graphic image-based e-book . 7
4.1 General . 7
4.2 Target sourcebook . 8
5 Scanning scheme . 8
5.1 Cutting the sourcebook . 8
5.2 Scanning sourcebook . 8
5.3 Setup/adjustment of image quality related parameters . 9
5.3.1 Elimination of unintended density variation . 9
5.3.2 Resolution . 9
5.3.3 Highlight washout point . 9
5.3.4 Tone curve adjustment / Black point setup . 9
5.4 Post-processing / encoding . 10
5.4.1 Post-processing . 10
5.4.2 Encoding . 10
Annex A (informative) Defect examples . 11
A.1 Image loss . 11
A.2 Image tilt . 12
A.3 Show-through . 13
A.4 Line image discontinuity . 13
A.5 Moiré . 14
A.6 Highlight washout . 15
A.7 Highlight washout and unwanted shadow clipping . 16
Bibliography . 18
Figure 1 – Workflow for generating e-book from sourcebook . 8
Figure 2 – Tone curve adjustment / Black point setup . 10
Figure A.1 – An example of the double-page spread without image loss . 11
Figure A.2 – An example of the double-page spread with image loss . 12
Figure A.3 – An example of the text image without image tilt. 12
Figure A.4 – An example of the text image with image tilt . 12
Figure A.5 – An example of the text image without show through . 13
Figure A.6 – An example of the text image with show through . 13
Figure A.7 – An example of the text image without line image discontinuity . 14
Figure A.8 – An example of the text image with line image discontinuity . 14
Figure A.9 – An example of the photographic image without moiré . 14
Figure A.10 – An example of the photographic image with moiré . 15
Figure A.11 – An example of the business graphics image without highlight washout . 15
Figure A.12 – An example of the business graphics image with highlight washout . 16
---------------------- Page: 8 ----------------------
SIST EN 63029:2018
IEC 63029:2017 IEC 2017 – 3 –
Figure A.13 – An example of the photographic image without highlight washout and
unwanted shadow clipping . 16
Figure A.14 – An example of the photographic image with highlight washout . 17
Figure A.15 – An example of the photographic image with unwanted shadow clipping . 17
---------------------- Page: 9 ----------------------
SIST EN 63029:2018
– 4 – IEC 63029:2017 IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
AUDIO, VIDEO MULTIMEDIA SYSTEMS AND EQUIPMENT –
MULTIMEDIA E-PUBLISHING AND E-BOOK TECHNOLOGIES –
RASTER-GRAPHICS IMAGE-BASED E-BOOKS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 63029 has been prepared by IEC technical committee 100: Audio,
video and multimedia systems and equipment.
The text of this International Standard is based on the following documents:
CDV Report on voting
100/2817/CDV 100/2918/RVC
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 10 ----------------------
SIST EN 63029:2018
IEC 63029:2017 IEC 2017 – 5 –
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the docu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.