SIST EN 61988-3-2:2010

Plasma display panels - Part 3-2: Electrical interface (IEC 61988-3-2:2009)

This part of IEC 61988 defines the electrical interface of digital video data signals, synchronization signals and functional signals between the image processing board of the PDP set and the control board of the PDP module, and defines the description of the pin assignment of the connectors.

Plasmabildschirme - Teil 3-2: Schnittstelle - Elektrische Schnittstelle (IEC 61988-3-2:2009)

Panneaux d'affichage à plasma - Partie 3-2: Interface électrique (CEI 61988-3-2:2009)

La CEI 61988-3-2:2009 définit l'interface électrique des signaux de données vidéo numériques, des signaux de synchronisation et des signaux fonctionnels entre la carte de traitement d'image de l'ensemble PDP (plasma display panel) et la carte de commande du module PDP, et elle définit l'affectation des broches des connecteurs.

Plošče s plazemskim prikazovalnikom - 3-2. del: Električni vmesnik (IEC 61988-3-2:2009)

Ta del IEC 61988 določa električni vmesnik za digitalne podatkovne video signale, sinhronizacijske signale in funkcionalne signale med ploščo za obdelavo slik seta PDP in nadzorno ploščo modula PDP ter določa opis določanja polov konektorjev.

General Information

• Status: Published
• Publication Date: 15-Dec-2009
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 12-Nov-2009
• Due Date: 17-Jan-2010
• Completion Date: 16-Dec-2009
• Ref Project: EN 61988-3-2:2009 - Plasma display panels - Part 3-2: Interface - Electrical interface

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61988-3-2:2010
01-januar-2010
3ORãþHVSOD]HPVNLPSULND]RYDOQLNRPGHO(OHNWULþQLYPHVQLN,(&

Plasma display panels - Part 3-2: Electrical interface (IEC 61988-3-2:2009)
Plasmabildschirme - Teil 3-2: Schnittstelle - Elektrische Schnittstelle (IEC 61988-3-
2:2009)
Panneaux d'affichage à plasma - Partie 3-2: Interface électrique (CEI 61988-3-2:2009)
Ta slovenski standard je istoveten z: EN 61988-3-2:2009
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN 61988-3-2:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61988-3-2:2010

---------------------- Page: 2 ----------------------

SIST EN 61988-3-2:2010

EUROPEAN STANDARD
EN 61988-3-2

NORME EUROPÉENNE
November 2009
EUROPÄISCHE NORM

ICS 31.260


English version


Plasma display panels -
Part 3-2: Interface -
Electrical interface
(IEC 61988-3-2:2009)


Panneaux d'affichage à plasma -  Plasmabildschirme -
Partie 3-2: Interface - Teil 3-2: Schnittstelle -
Interface électrique Elektrische Schnittstelle
(CEI 61988-3-2:2009) (IEC 61988-3-2:2009)




This European Standard was approved by CENELEC on 2009-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61988-3-2:2009 E

---------------------- Page: 3 ----------------------

SIST EN 61988-3-2:2010
EN 61988-3-2:2009 - 2 -
Foreword
The text of document 110/181/FDIS, future edition 1 of IEC 61988-3-2, prepared by IEC TC 110, Flat
panel display devices, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 61988-3-2 on 2009-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61988-3-2:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-1 NOTE  Harmonized as EN 60068-1:1994 (not modified).
IEC 60107-1 NOTE  Harmonized as EN 60107-1:1997 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 61988-3-2:2010
- 3 - EN 61988-3-2:2009

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 61988-1 - Plasma display panels - EN 61988-1 2003
Part 1: Terminology and letter symbols


1) 2)
IEC 61988-2-1 - Plasma display panels - EN 61988-2-1 2002
Part 2-1: Measuring methods - Optical


1) 2)
IEC 61988-2-2 - Plasma display panels - EN 61988-2-2 2003
Part 2-2: Measuring methods - Optoelectrical


1)
ANSI TIA/ - Electrical Characteristics of Low Voltage - -
EIA-644-A Differential Signaling (LVDS) Interface Circuits


JEIDA-59 1999 Digital Interface Standards for Monitor - -




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 61988-3-2:2010

---------------------- Page: 6 ----------------------

SIST EN 61988-3-2:2010
IEC 61988-3-2
®
Edition 1.0 2009-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Plasma display panels –
Part 3-2: Interface – Electrical interface

Panneaux d’affichage à plasma –
Partie 3-2: Interface – Interface électrique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
T
CODE PRIX
ICS 31.260 ISBN 2-8318-1054-3
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 61988-3-2:2010
– 2 – 61988-3-2 © IEC:2009
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 Terms, definitions and abbreviations .5
3.1 Terms and definitions .5
3.2 Abbreviations .5
4 Electrical interface requirements .6
5 Electrical interface of digital signal .6
5.1 Basic configuration.6
5.2 Interface input signal definition.7
5.3 Pin assignment.9
5.4 Input signal timing .10
5.5 Power requirement .10
Annex A (informative) LVDS, TTL and TMDS.11
Bibliography.24

Figure 1 – Block diagram of an example interface of data signal .7
Figure A.1 – Interface configuration .11
Figure A.2 – Timing chart for resolution 1024 x 768 .14
Figure A.3 – Logic power and LVDS signals sequencing diagram .15
Figure A.4 – Data enable timing parameters .16
Figure A.5 – Interface configuration .17
Figure A.6 – Interface configuration .20

Table 1 – Example of interface signal function .8
Table 2 – Example of connector pin assignments.9
Table A.1 – Signal definition and function .12
Table A.2 – Connector pin assignment.13
Table A.3 – Input signal timing specification for resolution 1024x768 .15
Table A.4 – Input signal specifications .18
Table A.5 – Connector pin assignments .19
Table A.6 – Input signal specifications .21
Table A.7 – Example of pin assignment of connector .21
Table A.8 –Limiting values (Absolute maximum rating system) .22
Table A.9 – Electrical characteristics .23

---------------------- Page: 8 ----------------------

SIST EN 61988-3-2:2010
61988-3-2 © IEC:2009 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

PLASMA DISPLAY PANELS –

Part 3-2: Interface –
Electrical interface


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61988-3-2 has been prepared by IEC technical committee 110:
Flat panel display devices.
The text of this standard is based on the following documents:
FDIS Report on voting
110/181/FDIS 110/190/RVD

Full information on the voting for the approval on this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 61988 series, under the general title Plasma display panels,
can be found on the IEC website.

---------------------- Page: 9 ----------------------

SIST EN 61988-3-2:2010
– 4 – 61988-3-2 © IEC:2009
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 10 ----------------------

SIST EN 61988-3-2:2010
61988-3-2 © IEC:2009 – 5 –
PLASMA DISPLAY PANELS –

Part 3-2: Interface –
Electrical interface

1 Scope
This part of IEC 61988 defines the electrical interface of digital video data signals,
synchronization signals and functional signals between the image processing board of the
PDP set and the control board of the PDP module, and defines the description of the pin
assignment of the connectors.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 61988-1, Plasma display panels – Part 1: Terminology and letter symbols
IEC 61988-2-1, Plasma display panels – Part 2-1: Measuring methods – Optical
IEC 61988-2-2, Plasma display panels – Part 2-2: Measuring methods – Optoelectrical
TIA/EIA-644A, Electrical characteristics of low voltage differential signaling (LVDS) interface
circuits
JEIDA-59-1999, Digital interface standards for monitor (only available in English)
3 Terms, definitions and abbreviations
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 61988-1,
IEC 60068-1 and IEC 60107-1 as well as the following apply.
3.1.1
image processing board
circuit board including A/D converter, scaler and video decoder, deinterlacing for image signal
from input device such as TV-tuner, PC, DVD, etc.
3.2 Abbreviations
NOTE The following are acronyms for reference.
TTL Transistor-transistor logic
LVDS Low voltage differential signalling
TMDS Transition minimized differential signalling
HS Horizontal synchronization
VS Vertical synchronization
DE Data enab
...