iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60825-1:2014/AC:2017

(Corrigendum)

Safety of laser products - Part 1: Equipment classification and requirements

Safety of laser products - Part 1: Equipment classification and requirements

2019-09-26: not to be offered for LVD citation, DOW extension

Sicherheit von Lasereinrichtungen - Teil 1: Klassifizierung von Anlagen und Anforderungen

Sécurité des appareils à laser - Partie 1: Classification des matériels et exigences

Varnost laserskih izdelkov - 1. del: Klasifikacija opreme in zahteve - Popravek AC

General Information

Status
Published
Publication Date
30-Aug-2017
ICS
13.280 - Radiation protection
31.260 - Optoelectronics. Laser equipment
Technical Committee
ISS EIT.EVL - Optical radiation safety and laser equipment
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Aug-2017
Due Date
29-Oct-2017
Completion Date
31-Aug-2017
Directive
2010-01-1695 - Uredba o varovanju delavcev pred tveganji zaradi izpostavljenosti umetnim optičnim sevanjem
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
Mandate
M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
M/536 - [C(2015)536] Standardisation request as regards radio equipment in support of Directive 2014/53/EU
Ref Project
EN 60825-1:2014/AC:2017-06 - Safety of laser products - Part 1: Equipment classification and requirements

Relations

Corrects
SIST EN 60825-1:2014 - Safety of laser products - Part 1: Equipment classification and requirements
Effective Date
13-Jun-2017
SIST EN 60825-1:2014/AC:2017SIST EN 60825-1:2014/AC:2017
PreviousNext
Corrigendum
SIST EN 60825-1:2014/AC:2017
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varnost laserskih izdelkov - 1. del: Klasifikacija opreme in zahteve - Popravek ACSicherheit von Lasereinrichtungen - Teil 1: Klassifizierung von Anlagen und AnforderungenSécurité des appareils à laser - Partie 1: Classification des matériels et exigencesSafety of laser products - Part 1: Equipment classification and requirements31.260Optoelektronika, laserska opremaOptoelectronics. Laser equip
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

Frequently Asked Questions

SIST EN 60825-1:2014/AC:2017 is a corrigendum published by the Slovenian Institute for Standardization (SIST). Its full title is "Safety of laser products - Part 1: Equipment classification and requirements". This standard covers: 2019-09-26: not to be offered for LVD citation, DOW extension

2019-09-26: not to be offered for LVD citation, DOW extension

SIST EN 60825-1:2014/AC:2017 is classified under the following ICS (International Classification for Standards) categories: 13.280 - Radiation protection; 31.260 - Optoelectronics. Laser equipment. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 60825-1:2014/AC:2017 has the following relationships with other standards: It is inter standard links to SIST EN 60825-1:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

SIST EN 60825-1:2014/AC:2017 is associated with the following European legislation: EU Directives/Regulations: 2010-01-1695, 2014/35/EU, 2014/53/EU; Standardization Mandates: M/511, M/536. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase SIST EN 60825-1:2014/AC:2017 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

This May Also Interest You

SIST
SIST EN 60825-1:2014/A11:2021/AC:2022(Corrigendum)
Safety of laser products - Part 1: Equipment classification and requirements
EN 60825-1:2014/A11:2021/AC:2022-03

CCMC origin

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50689:2022(Main)
Safety of laser products - Particular Requirements for Consumer Laser Products
EN 50689:2021

This document specifies the requirements for laser products intended for consumers. The scope of this document does not include products intended for professional use (non-consumer laser products) and restrictions as specified in this standard do not apply to non-consumer laser products.
For non-consumer laser products, compliance with EN 60825 1 is sufficient to achieve the necessary level of safety.
Electric Toys containing lasers, which are covered by EN 62115, are excluded from the scope of this document.
Class 1C consumer laser products are not in the scope of this document. For example, cosmetic and beauty care Class 1C laser products are covered by FprEN 60335 2 113.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60825-1:2014/A11:2021(Amendment)
Safety of laser products - Part 1: Equipment classification and requirements
EN 60825-1:2014/A11:2021

Amendment of EN 60825-1 in relation to European regulation (LVD2)

  • Amendment
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60825-1:2014(Main)
Safety of laser products - Part 1: Equipment classification and requirements
EN 60825-1:2014

IEC 60825-1:2014 is applicable to safety of laser products emitting laser radiation in the wavelength range 180 nm to 1 mm. A laser product may consist of a single laser with or without a separate power supply or may incorporate one or more lasers in a complex optical, electrical, or mechanical system. Typically, laser products are used for demonstration of physical and optical phenomena, materials processing, data reading and storage, transmission and display of information, etc. Such systems have found use in industry, business, entertainment, research, education, medicine and consumer products. Laser products that are sold to other manufacturers for use as components of any system for subsequent sale are not subject to IEC 60825-1, since the final product will itself be subject to this standard. Laser products that are sold by or for manufacturers of end products for use as repair parts for the end products are also not subject to IEC 60825-1. However, if the laser system within the laser product is operable when removed from the end product, the requirements of this Part 1 apply to the removable laser system. The objectives of this part of IEC 60825 are:
- to introduce a system of classification of lasers and laser products emitting radiation in the wavelength range 180 nm to 1 mm according to their degree of optical radiation hazard in order to aid hazard evaluation and to aid the determination of user control measures;
- to establish requirements for the manufacturer to supply information so that proper precautions can be adopted;
- to ensure, through labels and instructions, adequate warning to individuals of hazards associated with accessible radiation from laser products; and
- to reduce the possibility of injury by minimizing unnecessary accessible radiation and to give improved control of the laser radiation hazards through protective features. This edition includes the following significant technical changes with respect to the previous edition:
- a new class, Class 1C, was introduced;
- the measurement condition 2 ("eye loupe" condition) was removed;
- a classification of the emission of laser products below a certain radiance level that are intended to be used as replacement for conventional light sources can, as an option, be based on the IEC 62471 series;
- and the accessible emission limits (AELs) for Class 1, 1M, 2, 2M and 3R of pulsed sources, particularly of pulsed extended sources, were updated to reflect the latest revision of the ICNIRP guidelines on exposure limits (accepted for publication in Health Physics Journal 2013, see also www.icnirp.org).

  • Standard
    117 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12254:2010/AC:2012(Corrigendum)
Screens for laser working places - Safety requirements and testing
EN 12254:2010/AC:2011

This European Standard specifies functional requirements and a product labelling applicable to temporary and permanent passive guards (in the following called screens) for protection against laser radiation. This standard includes test methods for testing functional performance and the specification of the user documentation to be supplied with the product. The screens are designed to protect the user from: unintentional exposure to direct and/or diffuse laser radiation; a time limited exposure to laser radiation, based on the functional requirements determined by risk assessment. This European Standard applies to supervised screens for installations in working places at which laser radiation up to a maximum mean power of 100 W or single pulse energy of 30 J occurs within the spectral range between 180 nm (0,18 μm) and 106 nm (1 000 μm). This European Standard applies to the protection against laser radiation only. This standard does not apply to other hazards including hazards from secondary radiation that can arise during, for example, material processing. This European Standard gives guidance on how to select such screens. Laser enclosures and housings that are supplied as part of the laser product or are supplied to be fitted to a laser system to form a laser product (according to EN 60825-1) are not considered to be within the scope of the standard.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12254:2010(Main)
Screens for laser working places - Safety requirements and testing
EN 12254:2010

This standard specifies functional requirements and a product labelling applicable to temporary and permanent passive guards (in the following called screens) for protection against laser radiation. This standard includes test methods for testing functional performance and the specification of the user documentation to be supplied with the product. The screens are designed to protect the user from:
-   unintentional exposure to direct and/or diffuse laser radiation;
-   a time limited exposure to laser radiation, based on the functional requirements determined by risk assessment.
This standard applies to supervised screens for installations in working places at which laser radiation up to a maximum mean power of 100 W or single pulse energy of 30 J occurs within the spectral range between 180 nm (0,18 µm) and 106 nm (1 000 µm).
This standard applies to the protection against laser radiation only. This standard does not apply to other hazards including hazards from secondary radiation that can arise during, for example, material processing.
This standard gives guidance on how to select such screens.
Laser enclosures and housings that are supplied as part of the laser product or are supplied to be fitted to a laser system to form a laser product (according to EN 60825-1) are not considered to be within the scope of the standard.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CLC/TR 50493:2008(Main)
National wordings of laser warning labels
CLC/TR 50493:2007

This Technical Report contains the national wordings of laser warning labels to be read in conjunction with EN 60825-1:1994.

  • Technical report
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CLC/TR 50448:2006(Main)
Guide to levels of competence required in laser safety
CLC/TR 50448:2005

This Guide has been prepared in order to provide information and guidance to employers and employees in organisations in which lasers are used. It is supplementary to the safety requirements specified in the EN 60825 series of standards on laser safety. The Guide outlines procedures for the management of laser hazards and defines levels of competence for those who work with laser equipment or who have responsibility for laser safety.

  • Technical report
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10059-1:2026(Main)
Dense shaped refractory products - Determination of cold compressive strength - Part 1: Referee test without packing (ISO 10059-1:2025)
EN ISO 10059-1:2025

This document specifies a method for determination of the cold compressive strength of dense shaped refractory products.
Shaped refractories are those which have fixed geometry and dimensions when delivered to the user. This document is accordingly applicable to standard shape refractory bricks, but also special shapes refractory products and pre-cast products.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8894-2:2026(Main)
Refractory materials - Determination of thermal conductivity - Part 2: Hot-wire method (parallel) (ISO 8894-2:2007)
EN ISO 8894-2:2025

This part of ISO 8894 describes a hot-wire (parallel) method for the determination of the thermal conductivity of refractory products and materials. It is applicable to dense and insulating shaped products and to powdered or granular materials (see 6.2), for thermal conductivities of less than 25 W/m·K. The limits are imposed by the thermal diffusivity of the test material and therefore by the dimensions of the test pieces; higher thermal conductivities can be measured if larger pieces are used. Electrically conducting materials cannot be measured.
NOTE 1 The thermal conductivity of products with a hydraulic or chemical bond can be affected by the appreciable amount of water that is retained after hardening or setting and is released on firing. These materials can therefore require pretreatment. The nature and extent of such pretreatment, and the period for which the test piece is held at the measurement temperature as a preliminary to carrying out the test, are details that are outside the scope of this part of ISO 8894 and are agreed between the parties concerned.
NOTE 2 In general, it is difficult to make measurements on anisotropic materials and the use of this method for such materials is also agreed between the parties concerned.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day