SIST EN 61982-1:2008

Secondary batteries for the propulsion of electric road vehicles -- Part 1: Test parameters

This standard specifies the values of the various parameters such as voltage, current, power and temperature to be used in the testing of battery cells, monoblocs and modules used for the propulsion of electric road vehicles. The standard also defines certain test conditions and procedures. In its present form, the standard does not apply to high temperature batteries such as sodium/sulphur types.

Sekundärbatterien für den Antrieb von Elektrostraßenfahrzeugen - Teil 1: Messgrößen

Accumulateurs pour la propulsion des véhicules routiers électriques -- Partie 1: Paramètres d'essai

La présente norme spécifie les valeurs des divers paramètres tels que la tension, le courant, la puissance et la température à utiliser lors des essais des éléments de batteries, des monoblocs et des modules utilisés pour la propulsion des véhicules routiers électriques. La norme définit également certaines conditions et procédures d'essai.

Sekundarne baterije za pogon električnih cestnih vozil - 1. del: Preskusni parametri (IEC 61982-1:2006)

General Information

• Status: Withdrawn
• Publication Date: 20-Nov-2007
• Withdrawal Date: 15-Aug-2021
• ICS: 29.220.20 - Acid secondary cells and batteries
• ICS: 43.120 - Electric road vehicles
• Technical Committee: ISCB - Secondary cells and batteries
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 27-Jul-2021
• Due Date: 19-Aug-2021
• Completion Date: 16-Aug-2021
• Ref Project: EN 61982-1:2006 - Secondary batteries for the propulsion of electric road vehicles - Part 1: Test parameters

Relations

• Revised: SIST EN 61982-1:2013 - Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests
• Effective Date: 06-May-2014
• Replaced By: SIST EN 61982-1:2013 - Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests
• Effective Date: 29-Jan-2023
• Replaced By: SIST EN 61982-1:2013 - Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests
• Effective Date: 17-May-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61982-1:2008
01-januar-2008
6HNXQGDUQHEDWHULMH]DSRJRQHOHNWULþQLKFHVWQLKYR]LOGHO3UHVNXVQL
SDUDPHWUL,(&
Secondary batteries for the propulsion of electric road vehicles -- Part 1: Test parameters
(IEC 61982-1:2006)
Sekundärbatterien für den Antrieb von Elektrostraßenfahrzeugen - Teil 1: Messgrößen
(IEC 61982-1:2006)
Accumulateurs pour la propulsion des véhicules routiers électriques -- Partie 1:
Parametres d'essai (IEC 61982-1:2006)
Ta slovenski standard je istoveten z: EN 61982-1:2006
ICS:
29.220.20 .LVOLQVNLVHNXQGDUQLþOHQLLQ Acid secondary cells and
EDWHULMH batteries
43.120 (OHNWULþQDFHVWQDYR]LOD Electric road vehicles
SIST EN 61982-1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61982-1

NORME EUROPÉENNE
November 2006
EUROPÄISCHE NORM

ICS 29.220.20


English version


Secondary batteries for the propulsion
of electric road vehicles
Part 1: Test parameters
(IEC 61982-1:2006)


Accumulateurs pour la propulsion  Sekundärbatterien für den Antrieb von
des véhicules routiers électriques Elektrostraßenfahrzeugen
Partie 1: Paramètres d'essai Teil 1: Messgrößen
(CEI 61982-1:2006) (IEC 61982-1:2006)




This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61982-1:2006 E

---------------------- Page: 2 ----------------------

EN 61982-1:2006 - 2 -
Foreword
The text of document 21/641/FDIS, future edition 1 of IEC 61982-1, prepared by IEC TC 21, Secondary
cells and batteries, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61982-1 on 2006-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61982-1:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61982-1:2006

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60051 Series Direct acting indicating analogue electrical EN 60051 Series
measuring instruments and their accessories

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



61982-1
INTERNATIONAL


Première édition
STANDARD

First edition

2006-09


Accumulateurs pour la propulsion des véhicules
routiers électriques –
Partie 1:
Paramètres d’essai

Secondary batteries for the propulsion of electric
road vehicles –
Part 1:
Test parameters
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
L
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

61982-1  IEC:2006 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9
1 Scope.11
2 Normative references .11
3 Terms and definitions .11
4 Test conditions .11
4.1 Accuracy of measuring instruments .11
4.2 Test samples.13
4.3 Test temperature.15
4.4 Temperature sensing location.15
4.5 Data recording.17
5 Type testing .17
5.1 Capacity testing .17
5.2 Rated capacity .17
5.3 Dynamic discharge testing.19
6 Applications testing .19
6.1 General conditions .19
6.2 Allowable tolerances .19
6.3 Available battery energy.21
6.4 Endurance testing (applications test).21
7 Peak power and effective battery resistance.21

Figure 1 – Peak power test profile.23

Table 1 – List of parameters for some battery systems .21

---------------------- Page: 6 ----------------------

61982-1  IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

SECONDARY BATTERIES FOR THE PROPULSION
OF ELECTRIC ROAD VEHICLES –

Part 1: Test parameters


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61982-1 has been prepared by IEC technical committee 21:
Secondary cells and batteries.
The text of this standard is based on the following documents:
FDIS Report on voting
21/641/FDIS 21/646/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 7 ----------------------

61982-1  IEC:2006 – 7 –
A list of all parts of IEC 61982, under the general title Secondary batteries for the propulsion
of electric road vehicles, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 8 ----------------------

61982-1  IEC:2006 – 9 –
INTRODUCTION
As the relatively slow development of electrically propelled road vehicles has evolved, several
important organizations around the world have developed test regimes for batteries intended
for their own particular needs.
A range of test procedures has developed which differ in the values of parameters used, and
gives rise to a situation where comparison of data from the various sources is either difficult
or impossible to
...