SIST EN 13032-3:2008
(Main)Measurement and presentation of photometric data of lamps and luminaries - Part 3: Presentation of data for emergency lighting of work places
Measurement and presentation of photometric data of lamps and luminaries - Part 3: Presentation of data for emergency lighting of work places
This standard specifies the required data for lamps and luminaires to verify conformity with EN 1838. This standard does not define the data requirements for signage, as these can be found in EN 1838.
Licht und Beleuchtung - Messung und Darstellung photometrischer Daten von Lampen und Leuchten - Teil 3: Darstellung von Daten für die Notbeleuchtung von Arbeitsstätten
Diese Norm legt die Lampen- und Leuchtendaten fest, die für die Konformitätsbestimmung mit EN 1838 erforderlich sind. Diese Norm definiert nicht die notwendigen Angaben für die Kennzeichnung, die auch in EN 1838 beschrieben sind.
Lumiere et éclairage - Mesurage et présentation des données photométriques des lampes et des luminaires - Partie 3 : Présentation des données pour l'éclairage de sécurité des lieux de travail
Svetloba in razsvetljava - Merjenje in podajanje fotometrijskih podatkov svetlobnih virov in svetilk - 3. del: Podajanje podatkov za zasilno razsvetljavo delovnega mesta
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Svetloba in razsvetljava - Merjenje in podajanje fotometrijskih podatkov svetlobnih virov in svetilk - 3. del: Podajanje podatkov za zasilno razsvetljavo delovnega mestaLicht und Beleuchtung - Messung und Darstellung photometrischer Daten von Lampen und Leuchten - Teil 3: Darstellung von Daten für die Notbeleuchtung von ArbeitsstättenLumiere et éclairage - Mesurage et présentation des données photométriques des lampes et des luminaires - Partie 3 : Présentation des données pour l'éclairage de sécurité des lieux de travailMeasurement and presentation of photometric data of lamps and luminaries - Part 3: Presentation of data for emergency lighting of work places91.160.10Notranja razsvetljavaInterior lighting17.180.20Barve in merjenje svetlobeColours and measurement of lightICS:Ta slovenski standard je istoveten z:EN 13032-3:2007SIST EN 13032-3:2008en,fr,de01-februar-2008SIST EN 13032-3:2008SLOVENSKI
STANDARD
SIST EN 13032-3:2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13032-3October 2007ICS 17.180.20; 91.160.10 English VersionMeasurement and presentation of photometric data of lampsand luminaires - Part 3: Presentation of data for emergencylighting of work placesLumière et éclairage - Mesure et présentation des donnéesphotométriques des lampes et des luminaires - Partie 3:Présentation des données pour l'éclairage de sécurité deslieux de travailLicht und Beleuchtung - Messung und Darstellungphotometrischer Daten von Lampen und Leuchten - Teil 3:Darstellung von Daten für die Notbeleuchtung vonArbeitsstättenThis European Standard was approved by CEN on 26 August 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13032-3:2007: ESIST EN 13032-3:2008
EN 13032-3:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Essential lamp data.6 5 Luminaire data.7 5.1 Essential luminaire data.7 5.1.1 Luminaire code.7 5.1.2 Normalized intensity table.7 5.1.3 Luminaire maintenance factors (LMF).8 5.1.4 Luminaire service correction factors (LSCF)- all data shall be declared.8 5.2 Useful luminaire data.8 5.2.1 Physical dimensions of the luminaire.8 5.2.2 Intensity diagram.8 5.2.3 Spacing tables.8 Annex A (informative)
Illuminance calculation on a horizontal plane from a point source.9 Bibliography.10
SIST EN 13032-3:2008
EN 13032-3:2007 (E) 3 Foreword This document (EN 13032-3:2007) has been prepared by Technical Committee CEN/TC 169 “Light and lighting”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2008, and conflicting national standards shall be withdrawn at the latest by April 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 13032-3:2008
EN 13032-3:2007 (E) 4 Introduction This standard is to be used in conjunction with EN 13032-1. Emergency lighting is required by National Regulations in a number of European countries. This standard specifies the required data for emergency lighting as required by EN 1838. For the application of this document the terms according to IEC 60050 also applies.
SIST EN 13032-3:2008
EN 13032-3:2007 (E) 5 1 Scope This standard specifies the required data for lamps and luminaires to verify conformity with EN 1838. This standard does not define the data requirements for signage, as these can be found in EN 1838. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13032-1, Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 1: Measurement and file format 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. NOTE This clause defines terms and quantities that are in use and important to this standard, and which may not be
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.