iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 11961:2009/AC:2009

(Corrigendum)

Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2008/Cor 1:2009)

Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2008/Cor 1:2009)

ISO - Taking over of an ISO Technical Corrigendum

Erdöl- und Erdgasindustrie - Stahl-Bohrrohre (ISO 11961:2008/Cor 1:2009)

Industries du pétrole et du gaz naturel - Tiges de forage en acier (ISO 11961:2008/Cor 1:2009)

Industrija za predelavo nafte in zemeljskega plina - Jeklene vrtalne cevi (ISO 11961:2008/Cor 1:2009)

General Information

Status
Withdrawn
Publication Date
24-May-2009
Withdrawal Date
28-Nov-2018
ICS
75.180.10 - Exploratory, drilling and extraction equipment
77.140.75 - Steel pipes and tubes for specific use
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
29-Nov-2018
Due Date
22-Dec-2018
Completion Date
29-Nov-2018
Ref Project
EN ISO 11961:2008/AC:2009 - Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2008/Cor 1:2009)

Relations

Corrects
SIST EN ISO 11961:2009 - Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2008)
Effective Date
01-Jul-2009
Replaced By
SIST EN ISO 11961:2019 - Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018)
Effective Date
28-Nov-2018
Replaced By
SIST EN ISO 11961:2019 - Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018)
Effective Date
08-Jun-2022
Revised
SIST EN ISO 11961:2019 - Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018)
Effective Date
07-Jun-2017
Corrects
SIST EN ISO 11961:2009 - Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2008)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 11961:2009/AC:2009EN ISO 11961:2009/AC:2009
PreviousNext
Corrigendum
EN ISO 11961:2009/AC:2009
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrija za predelavo nafte in zemeljskega plina - Jeklene vrtalne cevi (ISO 11961:2008/Cor 1:2009)Erdöl- und Erdgasindustrie - Stahl-Bohrrohre (ISO 11961:2008/Cor 1:2009)Industries du pétrole et du gaz naturel - Tiges de forage en acier (ISO 11961:2008/Cor 1:2009)Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2008/Cor 1:2009)77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific use75.180.10Oprema za raziskovanje in odkopavanjeExploratory and extraction equipmentICS:Ta slovenski standard je istoveten z:EN ISO 11961:2008/AC:2009SIST EN ISO 11961:2009/AC:2009en01-julij-2009SIST EN ISO 11961:2009/AC:2009SLOVENSKI
STANDARD



SIST EN ISO 11961:2009/AC:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 11961:2008/ACMay 2009Mai 2009Mai 2009ICS 75.180.10; 77.140.75English versionVersion FrançaiseDeutsche FassungPetroleum and natural gas industries - Steel drill pipe (ISO 11961:2008/Cor1:2009)Industries du pétrole et du gaz naturel -Tiges de forage en acier (ISO11961:2008/Cor 1:2009)Erdöl- und Erdgasindustrie - Stahl-Bohrrohre (ISO 11961:2008/Cor 1:2009)This corrigendum becomes effective on 13 May 2009 for incorporation in the official German andEnglish versions of the EN.Ce corrigendum prendra effet le 13 mai 2009 pour incorporation dans les versions officiellesallemande et anglaise de la EN.Die Berichtigung tritt am 13.Mai 2009 zur Einarbeitung in die offizielle Deutsche und EnglischeFassung der EN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque m
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 11960:2021(Main)
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
EN ISO 11960:2021

This document specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints),
coupling stock, coupling material and accessory material.
By agreement between the purchaser and manufacturer, this document can also be applied to other
plain-end pipe sizes and wall thicknesses.
This document is applicable to the following connections:
— short round thread casing (SC);
— long round thread casing (LC);
— buttress thread casing (BC);
— non-upset tubing (NU);
— external upset tubing (EU);
— integral-joint tubing (IJ).
NOTE 1 For further information, see API Spec 5B.
For such connections, this document specifies the technical delivery conditions for couplings and
thread protection.
NOTE 2 Supplementary requirements that can optionally be agreed for enhanced leak resistance connections
(LC) are given in A.9 SR22.
This document can also be applied to tubulars with connections not covered by ISO or API standards.
This document is applicable to products including the following grades of pipe: H40, J55, K55, N80, L80,
C90, R95, T95, P110, C110 and Q125.
This document is not applicable to threading requirements.
NOTE 3 Dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge
specifications, as well as, instruments and methods for inspection of threads are given in API Spec 5B.

  • Standard
    281 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    231 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11961:2019/A1:2020(Main)
Petroleum and natural gas industries - Steel drill pipe - Amendment 1 (ISO 11961:2018/Amd 1:2020)
EN ISO 11961:2018/A1:2020
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13680:2020(Main)
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020)
EN ISO 13680:2020

This document specifies the technical delivery conditions for corrosion-resistant alloy seamless
tubular products for casing, tubing, coupling stock and accessory material (including coupling stock
and accessory material from bar) for two product specification levels:
— PSL-1, which is the basis of this document;
— PSL-2, which provides additional requirements for a product that is intended to be both corrosion
and cracking resistant for the environments and qualification method specified in Annex G and in
the ISO 15156 series.
At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1.
NOTE 1 The corrosion-resistant alloys included in this document are special alloys in accordance with
ISO 4948-1 and ISO 4948-2.
NOTE 2 For the purpose of this document, NACE MR0175 is equivalent to the ISO 15156 series.
NOTE 3 Accessory products can be manufactured from coupling stock and tubular material, or from solid bar
stock or from bored and heat heat-treated bar stock as covered in Annex F.
This document contains no provisions relating to the connection of individual lengths of pipe.
This document contains provisions relating to marking of tubing and casing after threading.
This document is applicable to the following five groups of products:
a) group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure;
b) group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex
and super-duplex stainless alloy;
c) group 3, which is composed of stainless alloys with an austenitic structure (iron base);
d) group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base);
e) group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with
austenitic structure.
NOTE 4 Not all PSL-1 categories and grades can be made cracking resistant in accordance with the
ISO 15156 series and are, therefore, not included in PSL-2.

  • Standard
    136 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    148 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11961:2019(Main)
Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018)
EN ISO 11961:2018

This document specifies the technical delivery conditions for steel drill-pipes with upset pipe-body
ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas
industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1
form the basis of this document. The requirements that define different levels of standard technical
requirements for PSL-2 and PSL-3 are in Annex G.
This document covers the following grades of drill-pipe:
— grade E drill-pipe;
— high-strength grades of drill-pipe, grades X, G and S;
— enhanced H2S resistance drill pipe, grades D and F.
A typical drill-pipe configuration is given, showing main elements and lengths (see Figure B.1). The
main dimensions and masses of the grades of drill-pipe are given in both SI units (see Table A.1) and in
USC units (see Table C.1).
This document can also be used for drill-pipe with tool joints not specified by ISO or API standards.
By agreement between purchaser and manufacturer, this document can also be applied to other drillpipe
body and/or tool-joint dimensions. This document lists supplementary requirements that can
optionally be agreed between purchaser and manufacturer, for testing, performance verification and
non-destructive examination (see Annex E).
This document does not consider performance properties, nor performance degradation of the product
when in service.
NOTE 1 In this document, drill-pipe is designated by label 1, label 2, grade of material (E, X, G, S, D and F),
upset type and type of rotary shouldered connection. Designations are used for the purpose of identification in
ordering.
NOTE 2 Reference can be made to ISO 10424-2 or API Spec 7-2 for the detailed requirements for the threading
of drill-pipe tool joints.
NOTE 3 Reference can be made to API RP 7G for the performance properties of the drill-pipe.

  • Standard
    120 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13680:2020/oprA1:2023(Amendment)
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions - Amendment 1: Petroleum and natural gas industries - Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020/DAM 1:2023)
EN ISO 13680:2020/prA1
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11960:2021(Main)
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
EN ISO 11960:2021

This document specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints),
coupling stock, coupling material and accessory material.
By agreement between the purchaser and manufacturer, this document can also be applied to other
plain-end pipe sizes and wall thicknesses.
This document is applicable to the following connections:
— short round thread casing (SC);
— long round thread casing (LC);
— buttress thread casing (BC);
— non-upset tubing (NU);
— external upset tubing (EU);
— integral-joint tubing (IJ).
NOTE 1 For further information, see API Spec 5B.
For such connections, this document specifies the technical delivery conditions for couplings and
thread protection.
NOTE 2 Supplementary requirements that can optionally be agreed for enhanced leak resistance connections
(LC) are given in A.9 SR22.
This document can also be applied to tubulars with connections not covered by ISO or API standards.
This document is applicable to products including the following grades of pipe: H40, J55, K55, N80, L80,
C90, R95, T95, P110, C110 and Q125.
This document is not applicable to threading requirements.
NOTE 3 Dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge
specifications, as well as, instruments and methods for inspection of threads are given in API Spec 5B.

  • Standard
    281 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    231 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11961:2019/A1:2020(Main)
Petroleum and natural gas industries - Steel drill pipe - Amendment 1 (ISO 11961:2018/Amd 1:2020)
EN ISO 11961:2018/A1:2020
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13680:2020(Main)
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020)
EN ISO 13680:2020

This document specifies the technical delivery conditions for corrosion-resistant alloy seamless
tubular products for casing, tubing, coupling stock and accessory material (including coupling stock
and accessory material from bar) for two product specification levels:
— PSL-1, which is the basis of this document;
— PSL-2, which provides additional requirements for a product that is intended to be both corrosion
and cracking resistant for the environments and qualification method specified in Annex G and in
the ISO 15156 series.
At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1.
NOTE 1 The corrosion-resistant alloys included in this document are special alloys in accordance with
ISO 4948-1 and ISO 4948-2.
NOTE 2 For the purpose of this document, NACE MR0175 is equivalent to the ISO 15156 series.
NOTE 3 Accessory products can be manufactured from coupling stock and tubular material, or from solid bar
stock or from bored and heat heat-treated bar stock as covered in Annex F.
This document contains no provisions relating to the connection of individual lengths of pipe.
This document contains provisions relating to marking of tubing and casing after threading.
This document is applicable to the following five groups of products:
a) group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure;
b) group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex
and super-duplex stainless alloy;
c) group 3, which is composed of stainless alloys with an austenitic structure (iron base);
d) group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base);
e) group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with
austenitic structure.
NOTE 4 Not all PSL-1 categories and grades can be made cracking resistant in accordance with the
ISO 15156 series and are, therefore, not included in PSL-2.

  • Standard
    136 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    148 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11961:2019(Main)
Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018)
EN ISO 11961:2018

This document specifies the technical delivery conditions for steel drill-pipes with upset pipe-body
ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas
industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1
form the basis of this document. The requirements that define different levels of standard technical
requirements for PSL-2 and PSL-3 are in Annex G.
This document covers the following grades of drill-pipe:
— grade E drill-pipe;
— high-strength grades of drill-pipe, grades X, G and S;
— enhanced H2S resistance drill pipe, grades D and F.
A typical drill-pipe configuration is given, showing main elements and lengths (see Figure B.1). The
main dimensions and masses of the grades of drill-pipe are given in both SI units (see Table A.1) and in
USC units (see Table C.1).
This document can also be used for drill-pipe with tool joints not specified by ISO or API standards.
By agreement between purchaser and manufacturer, this document can also be applied to other drillpipe
body and/or tool-joint dimensions. This document lists supplementary requirements that can
optionally be agreed between purchaser and manufacturer, for testing, performance verification and
non-destructive examination (see Annex E).
This document does not consider performance properties, nor performance degradation of the product
when in service.
NOTE 1 In this document, drill-pipe is designated by label 1, label 2, grade of material (E, X, G, S, D and F),
upset type and type of rotary shouldered connection. Designations are used for the purpose of identification in
ordering.
NOTE 2 Reference can be made to ISO 10424-2 or API Spec 7-2 for the detailed requirements for the threading
of drill-pipe tool joints.
NOTE 3 Reference can be made to API RP 7G for the performance properties of the drill-pipe.

  • Standard
    120 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10301:2004(Main)
Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
EN 10301:2003

This European Standard specifies the application requirements and methods of test of liquid applied epoxy paints on the internal surface for the reduction of friction of tubes and pipeline fittings for conveyance of non-corrosive gas.
Other paints or paint systems are not excluded provided they comply with the requirements given in this standard.
The coating consist of one layer of liquid product, normally shop applied onto abrasive blast cleaned steel by airless spray or conventional spray techniques. Brush application may be used only for repairs.
The coating qualified in accordance with this standard is considered suitable for operating temperatures between
- 20 °C and + 110 °C.
In this European Standard the word "components" is used for tubes and fittings.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day