SIST EN ISO 13918:2018/oprA1:2019
(Amendment)Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/DAM 1:2018)
Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/DAM 1:2018)
WI abandoned further to the cancellation of equivalent ISO WI
Schweißen - Bolzen und Keramikringe für das Lichtbogenbolzenschweißen - Änderung 1 (ISO 13918:2017/DAM 1:2018)
Soudage - Goujons et bagues céramiques pour le soudage à l'arc des goujons - Amendement 1 (ISO 13918:2017/DAM 1:2018)
Varjenje - Čepi in keramični obroči za obločno varjenje čepov - Dopolnilo A1 (ISO 13918:2017/DAM 1:2018)
General Information
Relations
Overview - EN ISO 13918:2018/prA1 (ISO 13918:2017/DAM 1:2018)
EN ISO 13918:2018/prA1 is Amendment 1 to ISO 13918:2017, the international standard that specifies requirements for studs and ceramic ferrules used in arc stud welding. The amendment updates technical references, clarifies chemical equivalency notation, and corrects ferrule designation figures. It was prepared by ISO/TC 44/SC 10 and circulated as a draft amendment in 2018–2019. Note: CEN records show the CEN work item was abandoned following cancellation of an equivalent ISO work item.
Key topics and technical changes
This amendment focuses on limited but important editorial and technical clarifications:
- Reference update: Adds a reference to ISO/TR 17671-2 (welding - recommendations - welding of metallic materials: specific guidance relevant to this amendment).
- Chemical equivalency notation: Replaces the previous abbreviation CEV with CE in clause 5.3.3/Table 2, and introduces a note referring users to the method for calculating CE per ISO/TR 17671-2. This affects how alloying elements are reported for base materials used with studs.
- Corrections to ferrule designation: Corrects the figure used for ceramic ferrules designation MD in Table 17 ensuring accurate dimensional/identification information.
- Editorial and technical alignment: Small editorial corrections described in the amendment help align terminology (e.g., CE instead of CEV) and formulas with current ISO practice.
Practical applications and who uses this standard
EN ISO 13918 and this amendment are relevant to organizations and professionals involved with arc stud welding:
- Welding engineers and fabricators specifying studs and ferrules for structural or mechanical fastening.
- Manufacturers of welding studs, ceramic ferrules and related accessories who need to demonstrate product conformity.
- Quality managers and inspection bodies implementing welding quality procedures and material acceptance criteria.
- Procurement and design teams selecting fasteners and welding consumables for shipbuilding, construction, offshore, transport and heavy industry.
- Standards specialists ensuring documentation and specifications reference the correct chemical equivalency methods and ferrule designations.
Related standards
- ISO 13918:2017 - Base standard on studs and ceramic ferrules for arc stud welding.
- ISO/TR 17671-2 - Technical report providing guidance on chemical equivalency (CE) calculation and related welding considerations (referenced by the amendment).
- Other ISO and EN welding process and quality-management standards under ISO/TC 44 (welding and allied processes).
By adopting the amendment’s clarifications (CE notation and ferrule designation correction), users ensure clearer material specification, consistent chemical-equivalency reporting, and accurate component identification in arc stud welding applications.
Frequently Asked Questions
SIST EN ISO 13918:2018/oprA1:2019 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/DAM 1:2018)". This standard covers: WI abandoned further to the cancellation of equivalent ISO WI
WI abandoned further to the cancellation of equivalent ISO WI
SIST EN ISO 13918:2018/oprA1:2019 is classified under the following ICS (International Classification for Standards) categories: 21.060.10 - Bolts, screws, studs; 25.160.10 - Welding processes. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 13918:2018/oprA1:2019 has the following relationships with other standards: It is inter standard links to SIST EN ISO 13918:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN ISO 13918:2018/oprA1:2019 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2019
9DUMHQMHýHSLLQNHUDPLþQLREURþL]DREORþQRYDUMHQMHþHSRY'RSROQLOR$ ,62
'$0
Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO
13918:2017/DAM 1:2018)
Schweißen - Bolzen und Keramikringe für das Lichtbogenbolzenschweißen - Änderung 1
(ISO 13918:2017/DAM 1:2018)
Soudage - Goujons et bagues céramiques pour le soudage à l'arc des goujons -
Amendement 1 (ISO 13918:2017/DAM 1:2018)
Ta slovenski standard je istoveten z: EN ISO 13918:2018/prA1
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT AMENDMENT
ISO 13918:2017/DAM 1
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2018-12-07 2019-03-01
Welding — Studs and ceramic ferrules for arc stud welding
AMENDMENT 1
Soudage — Goujons et bagues céramiques pour le soudage à l'arc des goujons
AMENDEMENT 1
ICS: 21.060.10; 25.160.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 13918:2017/DAM 1:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018
ISO 13918:2017/DAM 1:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
ISO 13918:2017/DAM 1:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...