SIST EN 12512:2002/A1:2005
(Amendment)Timber Structures - Test methods - Cyclic testing of joints made with mechanical fasteners
Timber Structures - Test methods - Cyclic testing of joints made with mechanical fasteners
UAP of 3 months applies.
Holzbauwerke - Prüfverfahren - Zyklische Prüfungen van Anschlüssen mit mechanische Verbindungsmittlen
Structures en bois - Méthodes d'essai - Essais cycliques d'assemblages réalisés par organes méchaniques
Lesene konstrukcije – Preskusne metode – Ciklično preskušanje spojev z mehanskimi veznimi sredstvi
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12512:2002/A1:2005
01-december-2005
Lesene konstrukcije – Preskusne metode – Ciklično preskušanje spojev z
mehanskimi veznimi sredstvi
Timber Structures - Test methods - Cyclic testing of joints made with mechanical
fasteners
Holzbauwerke - Prüfverfahren - Zyklische Prüfungen van Anschlüssen mit mechanische
Verbindungsmittlen
Structures en bois - Méthodes d'essai - Essais cycliques d'assemblages réalisés par
organes méchaniques
Ta slovenski standard je istoveten z: EN 12512:2001/A1:2005
ICS:
21.060.01 Vezni elementi na splošno Fasteners in general
91.080.20 Lesene konstrukcije Timber structures
SIST EN 12512:2002/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12512:2002/A1:2005
---------------------- Page: 2 ----------------------
SIST EN 12512:2002/A1:2005
EUROPEAN STANDARD
EN 12512:2001/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2005
ICS 21.060.01; 91.080.20
English Version
Timber Structures - Test methods - Cyclic testing of joints made
with mechanical fasteners
Structures en bois - Méthodes d'essai - Essais cycliques Holzbauwerke - Prüfverfahren - Zyklische Prüfungen van
d'assemblages réalisés par organes méchaniques Anschlüssen mit mechanische Verbindungsmittlen
This amendment A1 modifies the European Standard EN 12512:2001; it was approved by CEN on 8 August 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the off
...
SLOVENSKI STANDARD
SIST EN 12512:2002/A1:2005
01-december-2005
/HVHQHNRQVWUXNFLMH±3UHVNXVQHPHWRGH±&LNOLþQRSUHVNXãDQMHVSRMHY]
PHKDQVNLPLYH]QLPLVUHGVWYL
Timber Structures - Test methods - Cyclic testing of joints made with mechanical
fasteners
Holzbauwerke - Prüfverfahren - Zyklische Prüfungen van Anschlüssen mit mechanische
Verbindungsmittlen
Structures en bois - Méthodes d'essai - Essais cycliques d'assemblages réalisés par
organes méchaniques
Ta slovenski standard je istoveten z: EN 12512:2001/A1:2005
ICS:
21.060.01 Vezni elementi na splošno Fasteners in general
91.080.20 Lesene konstrukcije Timber structures
SIST EN 12512:2002/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12512:2002/A1:2005
---------------------- Page: 2 ----------------------
SIST EN 12512:2002/A1:2005
EUROPEAN STANDARD
EN 12512:2001/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2005
ICS 21.060.01; 91.080.20
English Version
Timber Structures - Test methods - Cyclic testing of joints made
with mechanical fasteners
Structures en bois - Méthodes d'essai - Essais cycliques Holzbauwerke - Prüfverfahren - Zyklische Prüfungen van
d'assemblages réalisés par organes méchaniques Anschlüssen mit mechanische Verbindungsmittlen
This amendment A1 modifies the European Standard EN 12512:2001; it was approved by CEN on 8 August 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the offic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.