SIST EN 15376:2014
(Main)Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
It specifies requirements and test methods for marketed and delivered ethanol to be used as an extender for automotive fuel for petrol engine vehicles in accordance with the requirements of EN 228. It is applicable to ethanol used for blending at all levels up to and including 85 % (V/V).
Kraftstoffe für Kraftfahrzeuge - Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff - Anforderungen und Prüfverfahren
Diese Europäische Norm legt Anforderungen und Prüfverfahren für angeliefertes bzw. vermarktetes Ethanol fest, das als Streckmittel für Kraftstoffe zum Einsatz in Kraftfahrzeugen mit Ottomotor, in Übereinstimmung mit den Anforderungen von EN 228 [5], Verwendung findet. Die Norm ist für Ethanol für den gesamten Blendbereich bis hin zu und einschließlich 85 % (V/V) Ethanol anwendbar.
ANMERKUNG Für die Zwecke dieses Dokuments wird zur Angabe des Massenanteils einer Substanz μ der Ausdruck „% (m/m)“ und für den Volumenanteil einer Substanz, φ, der Ausdruck „% (V/V)“ verwendet.
Carburants pour automobiles - Ethanol comme constituant d'essence - Exigences et méthodes d'essais
La présente Norme européenne prescrit des exigences et des méthodes d’essais pour l’éthanol mis sur le marché et livré pour être utilisé comme composant du carburant automobile pour véhicules à moteur à essence conformément aux exigences de l'EN 228 [5]. Elle est applicable à l’éthanol utilisé dans les mélanges pouvant être incorporé jusqu’à hauteur de 85 % (V/V) compris.
NOTE Dans le cadre de ce document, les expressions "% (m/m)" et "% (V/V)" sont utilisées pour désigner respectivement les fractions massiques,µ, et les fractions volumiques, φ.
Goriva za motorna vozila - Etanol kot komponenta za dodajanje motornemu bencinu - Zahteve in preskusne metode
Določa zahteve in preskusne metode za tržen in dostavljen etanol, ki se uporablja kot dodatek za gorivo v vozilih z bencinskim motorjem v skladu z zahtevami standarda EN 228. Uporablja se za etanol, ki se uporablja za dodajanje na vseh stopnjah, vključno z do 85 % (V/V).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Goriva za motorna vozila - Etanol kot komponenta za dodajanje motornemu bencinu - Zahteve in preskusne metodeKraftstoffe für Kraftfahrzeuge - Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff - Anforderungen und PrüfverfahrenCarburants pour automobiles - Ethanol comme constituant d'essence - Exigences et méthodes d'essaisAutomotive fuels - Ethanol as a blending component for petrol - Requirements and test methods75.160.20Liquid fuels71.080.60Alkoholi. EtriAlcohols. EthersICS:Ta slovenski standard je istoveten z:EN 15376:2014SIST EN 15376:2014en,de01-december-2014SIST EN 15376:2014SLOVENSKI
STANDARDSIST EN 15376:20111DGRPHãþD
SIST EN 15376:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15376
October 2014 ICS 71.080.60; 75.160.20 Supersedes EN 15376:2011English Version
Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
Carburants pour automobiles - Ethanol comme base de mélange à l'essence - Exigences et méthodes d'essais
Kraftstoffe für Kraftfahrzeuge - Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 6 September 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15376:2014 ESIST EN 15376:2014
EN 15376:2014 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Sampling .4 4 Requirements and test methods .5 4.1 Dyes and markers .5 4.2 Additives .5 4.3 Denaturing .5 4.4 Generally applicable requirements and related test methods .6 4.5 Climate dependent requirements .7 4.6 Precision and dispute .7 Bibliography .8
SIST EN 15376:2014
EN 15376:2014 (E) 3 Foreword This document (EN 15376:2014) has been prepared by Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2015 and conflicting national standards shall be withdrawn at the latest by April 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15376:2011. This document has originally been prepared under mandate M/344 given to CEN by the European Commission and the European Free Trade Association along with other standards intended to be complementary to the regulatory measures contained in various EU Directives, see [1], [2], [3] and [4]. If (bio)ethanol is meant for use as automotive fuel component, this document applies. It is intended to call up this European Standard in EN 228 [5], in order to define the quality of (bio)ethanol which is added/blended to the petrol. The major updates of this third version concern the inclusion of newly developed methods for determination of inorganic chloride and sulfate, plus the lowering of their respective limits. As experience with ICP-OES instruments in the market has grown, EN 15837 has become the method in case of dispute for copper and sulfur content. The former version gave all relevant characteristics, requirements and test methods for (bio)ethanol, which were known at that time to be necessary to define the product to be used up to a maximum 10 % (V/V) blending component for automotive petrol fuel. With the actual document, the percentage of use is expanded to allow use at all percentages up to and including 85 % (V/V) and the requirements are updated accordingly. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 15376:2014
EN 15376:2014 (E) 4 1 Scope This European Standard specifies requirements and test methods for marketed and delivered ethanol to be used as an extender for automotive fuel for petrol engine vehicles in accordance with the requirements of EN 228 [5]. It is applicable to ethanol used for blending at all levels up to and including 85 % (V/V). NOTE For the purposes of this document, the term “% (m/m)” and “% (V/V)” are used to represent the mass fraction, µ, and the volume fraction, 3, respectively. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15485:2007, Ethanol as a blending component for petrol
Determination of sulfur content
Wavelength dispersive X-ray fluorescence spectrometric method EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.