SIST EN 303 808 V1.1.1:2023
(Main)Environmental Engineering (EE) - Applicability of EN 45552 to EN 45559 methods for assessment of material efficiency aspects of ICT network infrastructure goods in the context of circular economy
Environmental Engineering (EE) - Applicability of EN 45552 to EN 45559 methods for assessment of material efficiency aspects of ICT network infrastructure goods in the context of circular economy
The present document defines an assessment of the direct applicability of the general material efficiency standards to
ICT network infrastructure goods in the context of circular economy. The existing generic standards address durability;
ability to remanufacture; repair, reuse, and upgrade; recyclability and recoverability; assessment of recycled content and
reused components; critical raw material content and information provision. The present document highlights where
further work on metrics/KPI and measurement methodologies may be needed for ICT network infrastructure goods
beyond each of the general standards. Specific product standards will take precedence over the present document. The
present document is a product family standard and will not define specific product requirements.
Okoljski inženiring (EE) - Uporabnost metod v EN 45552 do EN 45559 za ocenjevanje o vidikih materialne učinkovitosti izdelkov omrežne infrastrukture IKT v okviru krožnega gospodarstva
Okoljski inženiring (EE) - Uporabnost metod v EN 45552 do EN 45559 za ocenjevanje vidikov materialne učinkovitosti izdelkov omrežne infrastrukture IKT v okviru krožnega gospodarstva
Pričujoči dokument opredeljuje ocenjevanje neposredne uporabnosti splošnih standardov materialne učinkovitosti izdelkov omrežne infrastrukture IKT v okviru krožnega gospodarstva. Obstoječi splošni standardi obravnavajo trajnost,
možnost ponovne izdelave, popravilo, ponovno uporabo in nadgradnjo, možnost recikliranja in predelave, oceno reciklirane vsebine in ponovno uporabljenih komponent, kritične surovine in zagotavljanje informacij. Ta dokument izpostavlja področja, na katerih je potrebno nadaljnje delo na metrikah/ključnih indikatorjih in metodologijah merjenja učinkovitosti izdelkov omrežne infrastrukture IKT, ki niso zajeti v posameznih splošnih standardih. Posebni standardi za izdelke imajo prednost pred tem dokumentom. Ta dokument je standard družine izdelkov in ne zajema zahtev za specifične izdelke.
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 303 808 V1.1.1:2023
01-marec-2023
Okoljski inženiring (EE) - Uporabnost metod v EN 45552 do EN 45559 za
ocenjevanje vidikov materialne učinkovitosti izdelkov omrežne infrastrukture IKT v
okviru krožnega gospodarstva
Environmental Engineering (EE) - Applicability of EN 45552 to EN 45559 methods for
assessment of material efficiency aspects of ICT network infrastructure goods in the
context of circular economy
Okoljski inženiring (EE) - Uporabnost metod v EN 45552 do EN 45559 za ocenjevanje o
vidikih materialne učinkovitosti izdelkov omrežne infrastrukture IKT v okviru krožnega
gospodarstva
Ta slovenski standard je istoveten z: ETSI EN 303 808 V1.1.1 (2023-01)
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
35.110 Omreževanje Networking
SIST EN 303 808 V1.1.1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 303 808 V1.1.1:2023
---------------------- Page: 2 ----------------------
SIST EN 303 808 V1.1.1:2023
ETSI EN 303 808 V1.1.1 (2023-01)
EUROPEAN STANDARD
Environmental Engineering (EE);
Applicability of EN 45552 to EN 45559 methods for assessment
of material efficiency aspects of ICT network infrastructure
goods in the context of circular economy
---------------------- Page: 3 ----------------------
SIST EN 303 808 V1.1.1:2023
2 ETSI EN 303 808 V1.1.1 (2023-01)
Reference
DEN/EE-EEPS50
Keywords
base station, environmental impact, e-waste
management, KPI, LCA, server, storage
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2023.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 303 808 V1.1.1:2023
3 ETSI EN 303 808 V1.1.1 (2023-01)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Introduction of Circular Economy concepts . 9
5 Special ICT network infrastructure goods considerations compared to general EN 45552 to
EN 45559 standards. 10
5.0 General . 10
5.1 EN 45552. 10
5.2 EN 45553. 10
5.3 EN 45554. 10
5.4 EN 45555. 11
5.5 EN 45556. 11
5.6 EN 45557. 11
5.7 EN 45558. 12
5.8 EN 45559. 12
6 Summary of applicability . 12
History . 13
ETSI
---------------------- Page: 5 ----------------------
SIST EN 303 808 V1.1.1:2023
4 ETSI EN 303 808 V1.1.1 (2023-01)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Environmental Engineering (EE).
National transposition dates
Date of adoption of this EN: 2 January 2023
Date of latest announcement of this EN (doa): 30 April 2023
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 October 2023
Date of withdrawal of any conflicting National Standard (dow): 31 October 2023
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 6 ----------------------
SIST EN 303 808 V1.1.1:2023
5 ETSI EN 303 808 V1.1.1 (2023-01)
Introduction
In order to facilitate a shift to a more sustainable economy, Circular Economy (CE) has been proposed as one of the
main ways forward. In this context, CE combined with Information and Communication Technology (ICT) could
enable decoupling of economic growth and environmental impact, see ETSI TR 103 476 [i.1] and Recommendation
ITU-T L.1022 [i.6]. In 2015, the European Commission issued Mandate 543 (M/543 [i.12]) Standardization Request
with regard to ecodesign requirements on material efficiency aspects for energy-related products, see ETSI
TR 103 476 [i.1] requesting European standardization organizations to develop standards. ETSI TC-EE accepted this
mandate for ICT network infrastructure goods, and CEN-CENELEC delivered a series of standards EN 45552 [1] to
EN 45559 [8] to cover the products within their scope. The present document is intended to provide input for
standardization related to Mandate M/543 [i.12]. The present document aims to show in which ways the finished
material efficiency standards EN 45552 [1] to EN 45559 [8] may or may not be directly applicable to ICT network
infrastructure goods. The present document is intended to provide an aid for further standardization, taking into account
the specificities of ICT network infrastructure goods which include complex products designed for long operating
lifetime, high availability and professional operation and maintenance processes in a business-to-business environment.
ETSI
---------------------- Page: 7 ----------------------
SIST EN 303 808 V1.1.1:2023
6 ETSI EN 303 808 V1.1.1 (2023-01)
1 Scope
The present document defines an assessment of the direct applicability of the general material efficiency standards to
ICT network infrastructure goods in the context of circular economy. The existing generic standards address durability;
ability to remanufacture; repair, reuse, and upgrade; recyclability and recoverability; assessment of recycled content and
reused components; critical raw material content and information provision. The present document highlights where
further work on metrics/KPI and measurement methodologies may be needed for ICT network infrastructure goods
beyond each of the general standards. Specific product standards will take precedence over the present document. The
present document is a product family standard and will not define specific product requirements.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] EN 45552:2020: "General method for the assessment of the durability of energy-related products",
(produced by CEN and CENELEC).
[2] EN 45553:2020: "General method for the assessment of the ability to remanufacture energy-
related products", (produced by CEN and CENELEC).
[3] EN 45554:2020: "General methods for the assessment of the ability to repair, reuse and upgrade
energy-related products", (produced by CEN and CENELEC).
[4] EN 45555:2019: "General methods for assessing the recyclability and recoverability of energy-
related products", (produced by CEN and CENELEC).
[5] EN 45556:2019: "General method for assessing the proportion of reused components in energy-
related products", (produced by CEN and CENELEC).
[6] EN 45557:2020: "General method for assessing the proportion of recycled material content in
energy-related products", (produced by CEN and CENELEC).
[7] EN 45558:2019: "General method to declare the use of critical raw materials in energy-related
products", (produced by CEN and CENELEC).
[8] EN 45559:2019: "Methods for providing information relating to material efficiency aspects of
energy-related products", (produced by CEN and CENELEC).
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
ETSI
---------------------- Page: 8 ----------------------
SIST EN 303 808 V1.1.1:2023
7 ETSI EN 303 808 V1.1.1 (2023-01)
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 103 476: "Environmental Engineering (EE); Circular Economy (CE) in Information and
Communication Technology (ICT); Definition of approaches, concepts and metrics".
NOTE: Available at
https://www.etsi.org/deliver/etsi_tr/103400_103499/103476/01.01.02_60/tr_103476v010102p.pdf.
[i.2] ETSI EN 303 800-1: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); Part 1: General".
[i.3] ETSI EN 303 800-2: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); Part 2: server and data storage product secure
data deletion functionality".
[i.4] ETSI EN 303 800-3: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); Part 3: server and data storage product
availability of firmware and of security updates to firmware".
[i.5] ETSI EN 303 800-5: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); P
...
SLOVENSKI STANDARD
SIST EN 303 808 V1.1.1:2023
01-marec-2023
Okoljski inženiring (EE) - Uporabnost metod v EN 45552 do EN 45559 za
ocenjevanje o vidikih materialne učinkovitosti izdelkov omrežne infrastrukture IKT
v okviru krožnega gospodarstva
Environmental Engineering (EE) - Applicability of EN 45552 to EN 45559 methods for
assessment of material efficiency aspects of ICT network infrastructure goods in the
context of circular economy
Okoljski inženiring (EE) - Uporabnost metod v EN 45552 do EN 45559 za ocenjevanje o
vidikih materialne učinkovitosti izdelkov omrežne infrastrukture IKT v okviru krožnega
gospodarstva
Ta slovenski standard je istoveten z: ETSI EN 303 808 V1.1.1 (2023-01)
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
35.110 Omreževanje Networking
SIST EN 303 808 V1.1.1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 303 808 V1.1.1:2023
---------------------- Page: 2 ----------------------
SIST EN 303 808 V1.1.1:2023
ETSI EN 303 808 V1.1.1 (2023-01)
EUROPEAN STANDARD
Environmental Engineering (EE);
Applicability of EN 45552 to EN 45559 methods for assessment
of material efficiency aspects of ICT network infrastructure
goods in the context of circular economy
---------------------- Page: 3 ----------------------
SIST EN 303 808 V1.1.1:2023
2 ETSI EN 303 808 V1.1.1 (2023-01)
Reference
DEN/EE-EEPS50
Keywords
base station, environmental impact, e-waste
management, KPI, LCA, server, storage
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2023.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 303 808 V1.1.1:2023
3 ETSI EN 303 808 V1.1.1 (2023-01)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Introduction of Circular Economy concepts . 9
5 Special ICT network infrastructure goods considerations compared to general EN 45552 to
EN 45559 standards. 10
5.0 General . 10
5.1 EN 45552. 10
5.2 EN 45553. 10
5.3 EN 45554. 10
5.4 EN 45555. 11
5.5 EN 45556. 11
5.6 EN 45557. 11
5.7 EN 45558. 12
5.8 EN 45559. 12
6 Summary of applicability . 12
History . 13
ETSI
---------------------- Page: 5 ----------------------
SIST EN 303 808 V1.1.1:2023
4 ETSI EN 303 808 V1.1.1 (2023-01)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Environmental Engineering (EE).
National transposition dates
Date of adoption of this EN: 2 January 2023
Date of latest announcement of this EN (doa): 30 April 2023
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 October 2023
Date of withdrawal of any conflicting National Standard (dow): 31 October 2023
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 6 ----------------------
SIST EN 303 808 V1.1.1:2023
5 ETSI EN 303 808 V1.1.1 (2023-01)
Introduction
In order to facilitate a shift to a more sustainable economy, Circular Economy (CE) has been proposed as one of the
main ways forward. In this context, CE combined with Information and Communication Technology (ICT) could
enable decoupling of economic growth and environmental impact, see ETSI TR 103 476 [i.1] and Recommendation
ITU-T L.1022 [i.6]. In 2015, the European Commission issued Mandate 543 (M/543 [i.12]) Standardization Request
with regard to ecodesign requirements on material efficiency aspects for energy-related products, see ETSI
TR 103 476 [i.1] requesting European standardization organizations to develop standards. ETSI TC-EE accepted this
mandate for ICT network infrastructure goods, and CEN-CENELEC delivered a series of standards EN 45552 [1] to
EN 45559 [8] to cover the products within their scope. The present document is intended to provide input for
standardization related to Mandate M/543 [i.12]. The present document aims to show in which ways the finished
material efficiency standards EN 45552 [1] to EN 45559 [8] may or may not be directly applicable to ICT network
infrastructure goods. The present document is intended to provide an aid for further standardization, taking into account
the specificities of ICT network infrastructure goods which include complex products designed for long operating
lifetime, high availability and professional operation and maintenance processes in a business-to-business environment.
ETSI
---------------------- Page: 7 ----------------------
SIST EN 303 808 V1.1.1:2023
6 ETSI EN 303 808 V1.1.1 (2023-01)
1 Scope
The present document defines an assessment of the direct applicability of the general material efficiency standards to
ICT network infrastructure goods in the context of circular economy. The existing generic standards address durability;
ability to remanufacture; repair, reuse, and upgrade; recyclability and recoverability; assessment of recycled content and
reused components; critical raw material content and information provision. The present document highlights where
further work on metrics/KPI and measurement methodologies may be needed for ICT network infrastructure goods
beyond each of the general standards. Specific product standards will take precedence over the present document. The
present document is a product family standard and will not define specific product requirements.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] EN 45552:2020: "General method for the assessment of the durability of energy-related products",
(produced by CEN and CENELEC).
[2] EN 45553:2020: "General method for the assessment of the ability to remanufacture energy-
related products", (produced by CEN and CENELEC).
[3] EN 45554:2020: "General methods for the assessment of the ability to repair, reuse and upgrade
energy-related products", (produced by CEN and CENELEC).
[4] EN 45555:2019: "General methods for assessing the recyclability and recoverability of energy-
related products", (produced by CEN and CENELEC).
[5] EN 45556:2019: "General method for assessing the proportion of reused components in energy-
related products", (produced by CEN and CENELEC).
[6] EN 45557:2020: "General method for assessing the proportion of recycled material content in
energy-related products", (produced by CEN and CENELEC).
[7] EN 45558:2019: "General method to declare the use of critical raw materials in energy-related
products", (produced by CEN and CENELEC).
[8] EN 45559:2019: "Methods for providing information relating to material efficiency aspects of
energy-related products", (produced by CEN and CENELEC).
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
ETSI
---------------------- Page: 8 ----------------------
SIST EN 303 808 V1.1.1:2023
7 ETSI EN 303 808 V1.1.1 (2023-01)
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 103 476: "Environmental Engineering (EE); Circular Economy (CE) in Information and
Communication Technology (ICT); Definition of approaches, concepts and metrics".
NOTE: Available at
https://www.etsi.org/deliver/etsi_tr/103400_103499/103476/01.01.02_60/tr_103476v010102p.pdf.
[i.2] ETSI EN 303 800-1: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); Part 1: General".
[i.3] ETSI EN 303 800-2: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); Part 2: server and data storage product secure
data deletion functionality".
[i.4] ETSI EN 303 800-3: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); Part 3: server and data storage product
availability of firmware and of security updates to firmware".
[i.5] ETSI EN 303 800-5: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy);
...
Draft ETSI EN 303 808 V1.0.0 (2022-10)
EUROPEAN STANDARD
Environmental Engineering (EE);
Applicability of EN 45552 to EN 45559 methods for assessment
of material efficiency aspects of ICT network infrastructure
goods in the context of circular economy
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 303 808 V1.0.0 (2022-10)
Reference
DEN/EE-EEPS50
Keywords
base station, environmental impact, e-waste
management, KPI, LCA, server, storage
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 303 808 V1.0.0 (2022-10)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Introduction of Circular Economy concepts . 9
5 Special ICT network infrastructure goods considerations compared to general EN 45552 to
EN 45559 standards. 10
5.0 General . 10
5.1 EN 45552. 10
5.2 EN 45553. 10
5.3 EN 45554. 10
5.4 EN 45555. 11
5.5 EN 45556. 11
5.6 EN 45557. 11
5.7 EN 45558. 12
5.8 EN 45559. 12
6 Summary of applicability . 12
History . 13
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 303 808 V1.0.0 (2022-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Environmental Engineering (EE),
and is now submitted for the combined Public Enquiry and Vote phase of the ETSI standards EN Approval Procedure.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 303 808 V1.0.0 (2022-10)
Introduction
In order to facilitate a shift to a more sustainable economy, Circular Economy (CE) has been proposed as one of the
main ways forward. In this context, CE combined with Information and Communication Technology (ICT) could
enable decoupling of economic growth and environmental impact, see ETSI TR 103 476 [i.1] and Recommendation
ITU-T L.1022 [i.6]. In 2015, the European Commission issued Mandate 543 (M/543 [i.12]) Standardization Request
with regard to ecodesign requirements on material efficiency aspects for energy-related products, see ETSI
TR 103 476 [i.1] requesting European standardization organizations to develop standards. ETSI TC-EE accepted this
mandate for ICT network infrastructure goods, and CEN-CENELEC delivered a series of standards EN 45552 [1] to
EN 45559 [8] to cover the products within their scope. The present document is intended to provide input for
standardization related to Mandate M/543 [i.12]. The present document aims to show in which ways the finished
material efficiency standards EN 45552 [1] to EN 45559 [8] may or may not be directly applicable to ICT network
infrastructure goods. The present document is intended to provide an aid for further standardization, taking into account
the specificities of ICT network infrastructure goods which include complex products designed for long operating
lifetime, high availability and professional operation and maintenance processes in a business-to-business environment.
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 303 808 V1.0.0 (2022-10)
1 Scope
The present document defines an assessment of the direct applicability of the general material efficiency standards to
ICT network infrastructure goods in the context of circular economy. The existing generic standards address durability;
ability to remanufacture; repair, reuse, and upgrade; recyclability and recoverability; assessment of recycled content and
reused components; critical raw material content and information provision. The present document highlights where
further work on metrics/KPI and measurement methodologies may be needed for ICT network infrastructure goods
beyond each of the general standards. Specific product standards will take precedence over the present document. The
present document is a product family standard and will not define specific product requirements.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] EN 45552:2020: "General method for the assessment of the durability of energy-related products",
(produced by CEN and CENELEC).
[2] EN 45553:2020: "General method for the assessment of the ability to remanufacture energy-
related products", (produced by CEN and CENELEC).
[3] EN 45554:2020: "General methods for the assessment of the ability to repair, reuse and upgrade
energy-related products", (produced by CEN and CENELEC).
[4] EN 45555:2019: "General methods for assessing the recyclability and recoverability of energy-
related products", (produced by CEN and CENELEC).
[5] EN 45556:2019: "General method for assessing the proportion of reused components in energy-
related products", (produced by CEN and CENELEC).
[6] EN 45557:2020: "General method for assessing the proportion of recycled material content in
energy-related products", (produced by CEN and CENELEC).
[7] EN 45558:2019: "General method to declare the use of critical raw materials in energy-related
products", (produced by CEN and CENELEC).
[8] EN 45559:2019: "Methods for providing information relating to material efficiency aspects of
energy-related products", (produced by CEN and CENELEC).
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
ETSI
---------------------- Page: 6 ----------------------
7 Draft ETSI EN 303 808 V1.0.0 (2022-10)
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 103 476: "Environmental Engineering (EE); Circular Economy (CE) in Information and
Communication Technology (ICT); Definition of approaches, concepts and metrics".
NOTE: Available at
https://www.etsi.org/deliver/etsi_tr/103400_103499/103476/01.01.02_60/tr_103476v010102p.pdf.
[i.2] ETSI EN 303 800-1: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); Part 1: General".
[i.3] ETSI EN 303 800-2: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); Part 2: server and data storage product secure
data deletion functionality".
[i.4] ETSI EN 303 800-3: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); Part 3: server and data storage product
availability of firmware and of security updates to firmware".
[i.5] ETSI EN 303 800-5: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); Part 5: server and data storage product
disassembly and disassembly instruction".
[i.6] Recommendation ITU-T L.1022: "Circular Economy: Definitions and concepts for material
efficiency for Information and Communication Technology".
[i.7] COM(2017) 490 final: "Communication from the Commission to the European Parliament, the
Council, the European economic and social committee and the Committee of the regions on the
2017 list of Critical Raw Materials for the EU".
[i.8] E
...
SLOVENSKI STANDARD
oSIST prEN 303 808 V1.0.0:2023
01-januar-2023
Okoljski inženiring (EE) - Uporabnost metod v EN 45552 do EN 45559 za
ocenjevanje o vidikih materialne učinkovitosti izdelkov omrežne infrastrukture IKT
v okviru krožnega gospodarstva
Environmental Engineering (EE) - Applicability of EN 45552 to EN 45559 methods for
assessment of material efficiency aspects of ICT network infrastructure goods in the
context of circular economy
Okoljski inženiring (EE) - Uporabnost metod v EN 45552 do EN 45559 za ocenjevanje o
vidikih materialne učinkovitosti izdelkov omrežne infrastrukture IKT v okviru krožnega
gospodarstva
Ta slovenski standard je istoveten z: ETSI EN 303 808 V1.0.0 (2022-10)
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
35.110 Omreževanje Networking
oSIST prEN 303 808 V1.0.0:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 303 808 V1.0.0:2023
---------------------- Page: 2 ----------------------
oSIST prEN 303 808 V1.0.0:2023
Draft ETSI EN 303 808 V1.0.0 (2022-10)
EUROPEAN STANDARD
Environmental Engineering (EE);
Applicability of EN 45552 to EN 45559 methods for assessment
of material efficiency aspects of ICT network infrastructure
goods in the context of circular economy
---------------------- Page: 3 ----------------------
oSIST prEN 303 808 V1.0.0:2023
2 Draft ETSI EN 303 808 V1.0.0 (2022-10)
Reference
DEN/EE-EEPS50
Keywords
base station, environmental impact, e-waste
management, KPI, LCA, server, storage
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 303 808 V1.0.0:2023
3 Draft ETSI EN 303 808 V1.0.0 (2022-10)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Introduction of Circular Economy concepts . 9
5 Special ICT network infrastructure goods considerations compared to general EN 45552 to
EN 45559 standards. 10
5.0 General . 10
5.1 EN 45552. 10
5.2 EN 45553. 10
5.3 EN 45554. 10
5.4 EN 45555. 11
5.5 EN 45556. 11
5.6 EN 45557. 11
5.7 EN 45558. 12
5.8 EN 45559. 12
6 Summary of applicability . 12
History . 13
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 303 808 V1.0.0:2023
4 Draft ETSI EN 303 808 V1.0.0 (2022-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Environmental Engineering (EE),
and is now submitted for the combined Public Enquiry and Vote phase of the ETSI standards EN Approval Procedure.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 6 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 303 808 V1.0.0:2023
5 Draft ETSI EN 303 808 V1.0.0 (2022-10)
Introduction
In order to facilitate a shift to a more sustainable economy, Circular Economy (CE) has been proposed as one of the
main ways forward. In this context, CE combined with Information and Communication Technology (ICT) could
enable decoupling of economic growth and environmental impact, see ETSI TR 103 476 [i.1] and Recommendation
ITU-T L.1022 [i.6]. In 2015, the European Commission issued Mandate 543 (M/543 [i.12]) Standardization Request
with regard to ecodesign requirements on material efficiency aspects for energy-related products, see ETSI
TR 103 476 [i.1] requesting European standardization organizations to develop standards. ETSI TC-EE accepted this
mandate for ICT network infrastructure goods, and CEN-CENELEC delivered a series of standards EN 45552 [1] to
EN 45559 [8] to cover the products within their scope. The present document is intended to provide input for
standardization related to Mandate M/543 [i.12]. The present document aims to show in which ways the finished
material efficiency standards EN 45552 [1] to EN 45559 [8] may or may not be directly applicable to ICT network
infrastructure goods. The present document is intended to provide an aid for further standardization, taking into account
the specificities of ICT network infrastructure goods which include complex products designed for long operating
lifetime, high availability and professional operation and maintenance processes in a business-to-business environment.
ETSI
---------------------- Page: 7 ----------------------
oSIST prEN 303 808 V1.0.0:2023
6 Draft ETSI EN 303 808 V1.0.0 (2022-10)
1 Scope
The present document defines an assessment of the direct applicability of the general material efficiency standards to
ICT network infrastructure goods in the context of circular economy. The existing generic standards address durability;
ability to remanufacture; repair, reuse, and upgrade; recyclability and recoverability; assessment of recycled content and
reused components; critical raw material content and information provision. The present document highlights where
further work on metrics/KPI and measurement methodologies may be needed for ICT network infrastructure goods
beyond each of the general standards. Specific product standards will take precedence over the present document. The
present document is a product family standard and will not define specific product requirements.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] EN 45552:2020: "General method for the assessment of the durability of energy-related products",
(produced by CEN and CENELEC).
[2] EN 45553:2020: "General method for the assessment of the ability to remanufacture energy-
related products", (produced by CEN and CENELEC).
[3] EN 45554:2020: "General methods for the assessment of the ability to repair, reuse and upgrade
energy-related products", (produced by CEN and CENELEC).
[4] EN 45555:2019: "General methods for assessing the recyclability and recoverability of energy-
related products", (produced by CEN and CENELEC).
[5] EN 45556:2019: "General method for assessing the proportion of reused components in energy-
related products", (produced by CEN and CENELEC).
[6] EN 45557:2020: "General method for assessing the proportion of recycled material content in
energy-related products", (produced by CEN and CENELEC).
[7] EN 45558:2019: "General method to declare the use of critical raw materials in energy-related
products", (produced by CEN and CENELEC).
[8] EN 45559:2019: "Methods for providing information relating to material efficiency aspects of
energy-related products", (produced by CEN and CENELEC).
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
ETSI
---------------------- Page: 8 ----------------------
oSIST prEN 303 808 V1.0.0:2023
7 Draft ETSI EN 303 808 V1.0.0 (2022-10)
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 103 476: "Environmental Engineering (EE); Circular Economy (CE) in Information and
Communication Technology (ICT); Definition of approaches, concepts and metrics".
NOTE: Available at
https://www.etsi.org/deliver/etsi_tr/103400_103499/103476/01.01.02_60/tr_103476v010102p.pdf.
[i.2] ETSI EN 303 800-1: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); Part 1: General".
[i.3] ETSI EN 303 800-2: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); Part 2: server and data storage product secure
data deletion functionality".
[i.4] ETSI EN 303 800-3: "Environmental Engineering (EE); Assessment of material efficiency of ICT
network infrastructure goods (circular economy); Part 3: server and data storage product
availability of firmware and of security updates to firmware".
[i.5] ETSI EN 303 800-5: "Environmental Engineering (EE); Assessment of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.