SIST EN 14566:2008/kprA1:2009
(Amendment)Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods
Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods
This European Standard specifies the characteristics and performance of mechanical fasteners, including nails, screws and staples, intended to be used for the fixing of gypsum plasterboard, gypsum boards with fibrous reinforcement, products from secondary processing and suitable ancillary products as shown in Figure 4, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together. Mechanical fasteners contribute to the stability of the assembly.
This European Standard covers the following product performance characteristics: reaction to fire and flexural strength to be measured
according to the corresponding European test methods. It provides for the evaluation of conformity of the product to this European
Standard. This EN also covers the additional technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics.
This European Standard does not cover nails, screws and staples intended for use with materials other than plasterboard and the plasterboard based products referred to above and their associated system components.
Mechanische Befestigunsmittel für Gipsplattensysteme - Begriffe, Anforderungen und Prüfverfahren
Fixations mécaniques pour systèmes en plaques de plâtre - Définitions, spécifications et méthodes d'essai
Mehanska pritrdilna sredstva za sisteme iz mavčnih plošč - Definicije, zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 14566:2008/kprA1:2009
01-april-2009
0HKDQVNDSULWUGLOQDVUHGVWYD]DVLVWHPHL]PDYþQLKSORãþ'HILQLFLMH]DKWHYHLQ
SUHVNXVQHPHWRGH
Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and
test methods
Mechanische Befestigunsmittel für Gipsplattensysteme - Begriffe, Anforderungen und
Prüfverfahren
Fixations mécaniques pour systèmes en plaques de plâtre - Définitions, spécifications et
méthodes d'essai
Ta slovenski standard je istoveten z: EN 14566:2008/prA1
ICS:
21.060.99 Drugi vezni elementi Other fasteners
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
SIST EN 14566:2008/kprA1:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 14566:2008/kprA1:2009
---------------------- Page: 2 ----------------------
SIST EN 14566:2008/kprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 14566:2008
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
February 2009
ICS 21.060.99; 91.100.10
English Version
Mechanical fasteners for gypsum plasterboard systems -
Definitions, requirements and test methods
Fixations mécaniques pour systèmes en plaques de plâtre - Mechanische Befestigunsmittel für Gipsplattensysteme -
Définitions, spécifications et méthodes d'essai Begriffe, Anforderungen und Prüfverfahren
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 241.
This draft amendment A1, if approved, will modify the European Standard EN 14566:2008. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14566:2008/prA1:2009: E
worldwide for CEN natio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.