SIST EN IEC 61010-2-201:2018
(Main)Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment (IEC 61010-2-201:2017)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment (IEC 61010-2-201:2017)
This part of IEC 61010 specifies safety requirements and related verification tests for any
product performing the function of control equipment and/or their associated peripherals.
In addition, these products have as their intended use the command and control of
machines, automated manufacturing and industrial processes, e.g. discrete and
continuous control. Some equipment examples are: programmable logic controller (PLC);
• programmable automation controller (PAC);
• distributed control systems (DCS);
• remote I/O;
• industrial PC (computers) and panel PC;
• programming and debugging tools (PADTs);
• displays and human-machine interfaces (HMI);
• positioners.
Components of the above named equipment and in the scope of this standard are:
• (auxiliary) stand-alone power supplies;
• peripherals such as digital and analogue I/O, remote-I/O;
• industrial network equipment.
Control equipment and their associated peripherals are intended to be used in an industrial
environment and may be provided as OPEN or ENCLOSED EQUIPMENT.
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2-201: Besondere Anforderungen für Steuer- und Regelgeräte (IEC 61010-2-201:2017)
Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-201: Exigences particulières pour les équipements de commande (IEC 61010-2-201:2017)
Varnostne zahteve za električno opremo za meritve, nadzorovanje in laboratorijsko uporabo - 2-201. del: Posebne zahteve za opremo za nadzor in upravljanje (IEC 61010-2-201:2017)
Ta del standarda IEC 61010 določa varnostne zahteve in z njimi povezane preskuse preverjanja za kateri koli proizvod, ki deluje kot oprema za nadzor ter upravljanje, in/ali z njim povezane periferne naprave.
Poleg tega je predvideni namen uporabe teh proizvodov upravljanje in nadzor strojev ter avtomatiziranih proizvodnih in industrijskih procesov, npr. diskreten in neprekinjen nadzor. Nekateri primeri opreme: programirljivi logični krmilnik (PLC);
• programirljivi avtomatizacijski krmilnik (PAC);
• porazdeljeni nadzorni sistemi (DCS);
• daljinski I/O;
• industrijski osebni računalniki in panelni osebni računalniki;
• orodja za programiranje in iskanje napak (PADT);
• zasloni in vmesniki človek-stroj (HMI);
• naprave za pozicioniranje.
Komponente zgoraj omenjene opreme, ki spadajo na področje uporabe tega standarda, so:
• (pomožni) samostojni električni napajalniki;
• periferne naprave, kot so digitalni in analogni I/O ter daljinski I/O;
• industrijska omrežna oprema.
Oprema za nadzor in upravljanje ter z njo povezane periferne naprave so namenjene uporabi v industrijskem okolju in so lahko na voljo kot ODPRTA ali ZAPRTA OPREMA.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61010-2-201:2018
01-oktober-2018
Nadomešča:
SIST EN 61010-2-201:2013
SIST EN 61010-2-201:2013/AC:2014
Varnostne zahteve za električno opremo za meritve, nadzorovanje in laboratorijsko
uporabo - 2-201. del: Posebne zahteve za opremo za nadzor in upravljanje (IEC
61010-2-201:2017)
Safety requirements for electrical equipment for measurement, control and laboratory
use - Part 2-201: Particular requirements for control equipment (IEC 61010-2-201:2017)
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2
-201: Besondere Anforderungen für Steuer- und Regelgeräte (IEC 61010-2-201:2017)
Règles de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire - Partie 2-201: Exigences particulières pour les équipements de commande
(IEC 61010-2-201:2017)
Ta slovenski standard je istoveten z: EN IEC 61010-2-201:2018
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
SIST EN IEC 61010-2-201:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61010-2-201:2018
---------------------- Page: 2 ----------------------
SIST EN IEC 61010-2-201:2018
EUROPEAN STANDARD EN IEC 61010-2-201
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2018
ICS 17.020; 19.020; 25.040.40 Supersedes EN 61010-2-201:2013
English Version
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-201: Particular requirements
for control equipment
(IEC 61010-2-201:2017)
Exigences de sécurité pour appareils électriques de Sicherheitsbestimmungen für elektrische Mess-, Steuer-,
mesurage, de régulation et de laboratoire - Partie 2-201: Regel- und Laborgeräte - Teil 2-201: Besondere
Exigences particulières pour les équipements de Anforderungen für Steuer- und Regelgeräte
commande (IEC 61010-2-201:2017)
(IEC 61010-2-201:2017)
This European Standard was approved by CENELEC on 2017-02-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61010-2-201:2018 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
European foreword
The text of document 65/652/FDIS, future edition 2 of IEC 61010-2-201, prepared by
IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61010-2-201:2018.
The following dates are fixed:
(dop) 2018-12-22
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2023-06-22
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61010-2-201:2013 and EN 61010-2-201:2013/AC:2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directives.
For the relationship with EU Directives see informative Annex ZZ, which is integral part of this
document.
Endorsement notice
The text of the International Standard IEC 61010-2-201:2017 was approved by CENELEC as a
European Standard without any modification.
The Bibliography of EN 61010-1:2010 applies, except as follows:
Addition:
IEC 60079 (series) NOTE Harmonized as EN 60079 (series).
IEC 60364 (series) NOTE Harmonized as HD 60364 (series).
IEC 60364-4-41 NOTE Harmonized as HD 60364-4-41.
1 1
IEC 60664-5 NOTE Harmonized as EN 60664-5 .
IEC 60715 NOTE Harmonized as EN 60715.
IEC 60721-2-3 NOTE Harmonized as EN 60721-2-3.
IEC 61131-2:2007 NOTE Harmonized as EN 61131-2:2007 (not modified).
IEC 61131-6 NOTE Harmonized as EN 61131-6.
IEC 61140 NOTE Harmonized as EN 61140.
IEC 61326 (series) NOTE Harmonized as EN 61326 (series).
IEC 61508 (series) NOTE Harmonized as EN 61508 (series).
IEC 61643 (series) NOTE Harmonized as EN 61643 (series).
IEC 61800 (series) NOTE Harmonized as EN 61800 (series).
IEC 62133 NOTE Harmonized as EN 62133.
IEC 62368 (series) NOTE Harmonized as EN 62368 (series).
1
Withdrawn publication.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 60027 series Letter symbols to be used in electrical EN 60027 series
IEC 60065 (mod) - Audio, video and similar electronic EN 60065 2014
apparatus - Safety requirements
- - + A11 2017
IEC 60068-2-14 - Environmental testing -- Part 2-14: Tests - EN 60068-2-14 2009
Test N: Change of temperature
IEC 60068-2-75 - Environmental testing - Part 2-75: Tests - EN 60068-2-75 2014
Test Eh: Hammer tests
IEC 60073 - Basic and safety principles for man- EN 60073 2002
machine interface, marking and
identification - Coding principles for
indicators and actuators
IEC 60227 series Polyvinyl chloride insulated cables of rated - -
voltages up to and including 450/750
IEC 60245 series Rubber insulated cables - Rated voltages - -
up to and including 450/750 V
IEC 60309 series Plugs, socket-outlets and couplers for EN 60309 series
industrial purposes
IEC 60320 series Appliance couplers for household and EN 60320 series
similar general purposes -
IEC 60332-1-2 - Tests on electric and optical fibre cables EN 60332-1-2 2004
under fire conditions -- Part 1-2: Test for
vertical flame propagation for a single
insulated wire or cable - Procedure for 1
kW pre-mixed flame
- - + A1 2015
- - + A11 2016
IEC 60332-2-2 - Tests on electric and optical fibre cables EN 60332-2-2 2004
under fire conditions -- Part 2-2: Test for
vertical flame propagation for a single
small insulated wire or cable - Procedure
for diffusion flame
3
---------------------- Page: 5 ----------------------
SIST EN IEC 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
IEC 60335-2-24 - Household and similar electrical appliances EN 60335-2-24 2010
- Safety -- Part 2-24: Particular
requirements for refrigerating appliances,
ice-cream appliances and ice makers
IEC 60335-2-89 - Household and similar electrical appliances EN 60335-2-89 2010
- Safety -- Part 2-89: Particular
requirements for commercial refrigerating
appliances with an incorporated or remote
refrigerant condensing unit or compressor
- - + A1 2016
- - + A2 2017
IEC 60364-4-44 2007 Low-voltage electrical installations -- Part HD 60364-4-442 2012
(mod) 4-44: Protection for safety - Protection HD 60364-4-444 2010
against voltage disturbances and
electromagnetic disturbances
+ A1 (mod) 2015 HD 60364-4-443 2016
IEC 60384-14 - Fixed capacitors for use in electronic EN 60384-14 2013
equipment -- Part 14: Sectional
specification - Fixed capacitors for
electromagnetic interference suppression
and connection to the supply mains
2
IEC 60417 1973 Graphical symbols for use on equipment - -
2
IEC 60529 2013 Degrees of protection provided by - -
enclosures (IP Code)
IEC 60664-1 - Insulation coordination for equipment EN 60664-1 2007
within low-voltage systems -- Part 1:
Principles, requirements and tests
IEC 60664-3 - Insulation coordination for equipment EN 60664-3 2017
within low-voltage systems - Part 3: Use of
coating, potting or moulding for protection
against pollution
IEC 60695-2-11 - Fire hazard testing - Part 2-11: EN 60695-2-11 2014
Glowing/hot-wire based test methods -
Glow-wire flammability test method for
end-products (GWEPT)
IEC 60695-11-3 - Fire hazard testing -- Part 11-3: Test EN 60695-11-3 2012
flames - 500 W flames - Apparatus and
confirmational test methods
IEC 60695-11-10 - Fire hazard testing -- Part 11-10: Test EN 60695-11-10 2013
flames - 50 W horizontal and vertical flame
test methods
2
IEC 60799 2018 Electrical accessories – Cord sets and - -
interconnection cord sets
IEC 60825-1 - Safety of laser products -- Part 1: EN 60825-1 2014
Equipment classification and requirements
- - EN 60825- 2017
1:2014/AC:2017-06
IEC 60947-1 2007 Low-voltage switchgear and controlgear -- EN 60947-1 2007
Part 1: General rules
2
Dated as no equivalent European Standard exists.
4
---------------------- Page: 6 ----------------------
SIST EN IEC 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
- - + A1 2011
- - + A2 2014
IEC 60947-2 - Low voltage switchgear and controlgear - EN 60947-2 2017
Part 2: Circuit-breakers
IEC 60947-3 - Low-voltage switchgear and controlgear -- EN 60947-3 2009
Part 3: Switches, disconnectors, switch-
disconnectors and fuse-combination units
- + A1 2012
- + A2 2015
IEC 60947-5-1 - Low-voltage switchgear and controlgear - EN 60947-5-1 2017
Part 5-1: Control circuit devices and
switching elements - Electromechanical
control circuit devices
IEC 61010-1 2010 Safety requirements for electrical EN 61010-1 2010
equipment for measurement, control and
laboratory use -- Part 1: General
requirements
IEC 61010-2-030 - Safety requirements for electrical EN 61010-2-030 2010
equipment for measurement, control and
laboratory use -- Part 2-030: Particular
requirements for testing and measuring
circuits
IEC 61010-031 - Safety requirements for electrical EN 61010-031 2015
equipment for measurement, control and
laboratory use -- Part 031: Safety
requirements for hand-held probe
assemblies for electrical measurement and
test
2
IEC 61051-2 1991 Varistors for use in electronic equipment -- - -
Part 2: Sectional specification for surge
suppression varistors
IEC 61180 series High-voltage test techniques for low- EN 61180 series
voltage equipment -- Part 1: Definitions,
test and procedure requirements
IEC 61180-1 - High-voltage test techniques for low- EN 61180-1 1994
voltage equipment -- Part 1: Definitions,
test and procedure requirements
IEC 61180-2 - High-voltage test techniques for low- EN 61180-2 1994
voltage equipment -- Part 2: Test
equipment
2
IEC 61643-21 2000 Low voltage surge protective devices -- - -
Part 21: Surge protective devices
connected to telecommunications and
signalling networks - Performance
requirements and testing methods
IEC 61643-311 - Components for low-voltage surge EN 61643-311 2013
protective devices -- Part 311:
Performance requirements and test circuits
and methods for gas discharge tubes
(GDT)
5
---------------------- Page: 7 ----------------------
SIST EN IEC 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
IEC 61643-321 - Components for low-voltage surge EN 61643-321 2002
protective devices -- Part 321:
Specifications for Avalanche Breakdown
Diode (ABD)
IEC 61643-331 - Components for low-voltage surge EN 61643-331 2003
protective devices -- Part 331:
Specification for metal oxide varistors
(MOV)
IEC 61672-1 - Electroacoustics - Sound level meters -- EN 61672-1 2013
Part 1: Specifications
IEC 61672-2 - Electroacoustics - Sound level meters -- EN 61672-2 2013
Part 2: Pattern evaluation tests
- - + A1 2017
IEC 62262 - Degrees of protection provided by EN 62262 2002
enclosures for electrical equipment against
external mechanical impacts (IK code)
IEC 62471 (mod) - Photobiological safety of lamps and lamp EN 62471 2008
systems
2
IEC/TR 62471-2 2009 Photobiological safety of lamps and lamp - -
systems - Part 2: Guidance on
manufacturing requirements relating to
non-laser optical radiation safety
IEC 62598 - Nuclear instrumentation - Constructional EN 62598 2013
requirements and classification of
radiometric gauges
2
IEC Guide 104 2010 The preparation of safety publications and - -
the use of basic safety publications and
group safety publications
ISO/IEC Guide 51 2014 Safety aspects - Guidelines for their - -
inclusion in standards
ISO 306 2013 Plastics - Thermoplastic materials - EN ISO 306 2013
Determination of Vicat softening
temperature (VST)
2
ISO 361 1975 Basic ionizing radiation symbol - -
ISO 3746 - Acoustics - Determination of sound power EN ISO 3746 2010
levels and sound energy levels of noise
sources using sound pressure - Survey
method using an enveloping measurement
surface over a reflecting plane
2
ISO 7000 2014 Graphical symbols for use on equipment - - -
Registered symbols
ISO 9614-1 - Acoustics - Determination of sound power EN ISO 9614-1 2009
levels of noise sources using sound
intensity -- Part 1: Measurement at discrete
points
ISO 13857 - Safety of machinery - Safety distances to EN ISO 13857 2008
prevent hazard zones being reached by
upper and lower limbs
6
---------------------- Page: 8 ----------------------
SIST EN IEC 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
2
EN 378-2 2016 Refrigerating systems and heat pumps –
Safety and environmental requirements.
Design, construction, testing, marking and
documentation
7
---------------------- Page: 9 ----------------------
SIST EN IEC 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
Annex ZZ
(informative)
Relationship between this European standard and the safety
objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be
covered
This European Standard has been prepared under a Commission’s standardization request relating to
harmonized standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means
of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the
Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the
making available on the market of electrical equipment designed for use within certain voltage limits
[2014 OJ L96].
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding safety objectives of
that Directive, and associated EFTA regulations.
Table ZZ.1 – Correspondence between this European standard EN 61010-1:2018 and Annex I of
Directive 2014/35/EU [2014 OJ L96]
Clause(s) / sub-
Safety objectives of Directive
clause(s)
Remarks / Notes
2014/35/EU (Annex I)
of this EN
1. General conditions
5.1,
1 (a) the essential characteristics, the
5.2,
recognition and observance of which will
5.4
ensure that electrical equipment will be
used safely and in applications for which it
was made, shall be marked on the
electrical equipment, or, if this is not
possible, on an accompanying document
6.6,
1 (b) the electrical equipment, together
6.10,
with its component parts, shall be made in
Annex F
such a way as to ensure that it can be
safely and properly assembled and
connected
5.4,
1 (c) the electrical equipment shall be so
17 (for
designed and manufactured as to ensure
hazards not
that protection against the hazards set out
covered by
in points 2 and 3 is assured, providing that
clauses 6-16)
the equipment is used in applications for
See also the
which it was made and is adequately
details in
maintained
points 2 and 3
8
---------------------- Page: 10 ----------------------
SIST EN IEC 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
Clause(s) / sub-
Safety objectives of Directive
clause(s)
Remarks / Notes
2014/35/EU (Annex I)
of this EN
2. Protection against hazards arising from the electrical equipment
Measures of a technical nature shall be laid down in accordance with point 1, in order to ensure that:
4, 6.1 – 6.10,
2 (a) persons and domestic animals are
9.6, 11.2,
adequately protected against the danger
11.6, Annex F,
of physical injury or other harm which
Annex K
might be caused by direct or indirect
contact
4.4.4.2, 9.5,
2 (b) temperatures, arcs or radiation which
9.6, 10.1, -
would cause a danger, are not produced
10.5, 12
4.4, 7.2 - 7.6,
2 (c) persons, domestic animals and
9, 12.3 - 12.6,
property are adequately protected against
13.2.2, 13.2.3,
non-electrical dangers caused by the
16.2,
electrical equipment which are revealed
Annex DD
by experience
6.7, Annex K
2 (d) the insulation is suitable for
foreseeable conditions
3. Protection against hazards which may be caused by external influences on the electrical
equipment
Technical measures shall be laid down in accordance with point 1, in order to ensure that the electrical
equipment:
7, 8
3 (a) meets the expected mechanical
requirements in such a way that persons,
domestic animals and property are not
endangered
1.4, 6.7.2.2.1,
3 (b) is resistant to non-mechanical
10.5, 11.6,
influences in expected environmental
14.3, 14.8,
conditions, in such a way that persons,
14.101,
domestic animals and property are not
14.102
endangered
4, 9, 14, 16.1
3 (c) does not endanger persons,
domestic animals and property in
foreseeable conditions of overload
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
9
---------------------- Page: 11 ----------------------
SIST EN IEC 61010-2-201:2018
---------------------- Page: 12 ----------------------
SIST EN IEC 61010-2-201:2018
IEC 61010-2-201
®
Edition 2.0 2017-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Safety requirements for electrical equipment for measurement, control, and
laboratory use –
Part 2-201: Particular requirements for control equipment
Exigences de sécurité pour appareils électriques de mesurage, de régulation
et de laboratoire –
Partie 2-201: Exigences particulières pour les équipements de commande
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.020; 19.020; 25.040.40 ISBN 978-2-8322-4009-0
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 13 ----------------------
SIST EN IEC 61010-2-201:2018
– 2 – IEC 61010-2-201:2017 © IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope and object . 7
2 Normative references . 9
3 Terms and definitions . 9
4 Tests . 12
5 Marking and documentation . 13
6 Protection against electric shock . 14
7 Protection against mechanical HAZARDS . 28
8 Resistance to mechanical stresses . 29
9 Protection against the spread of fire . 30
10 Equipment temperature limits and resistance to heat . 31
11 Protection against HAZARDS from fluids . 37
12 Protection against radiation, including laser sources, and against sonic and
ultrasonic pressure . 37
13 Protection against liberated gases and substances, explosion and implosion . 37
14 Components and subassemblies . 38
15 Protection by interlocks . 39
16 HAZARDS resulting from application . 39
17 RISK assessment . 39
Annexes . 40
Annex E (informative) Guideline for reduction of POLLUTION DEGREES . 41
Annex F (normative) ROUTINE TESTS . 43
Annex L (informative) Index of defined terms . 45
Annex AA (informative) General approach to safety for control equipment . 46
Annex BB (informative) System drawing of isolation boundaries . 48
Annex CC (informative) Historical techniques for secondary circuits . 59
Annex DD (normative) Flammability test for magnesium alloy fire ENCLOSUREs or
flame barriers (see 9.3.2) . 63
Annex EE (informative) Information/documentation and correlation to its uses . 64
Annex FF (informative) Measurement of CLEARANCES and CREEPAGE DISTANCES . 66
Bibliography . 68
Figure 101 – Typical interface/port diagram of control equipment . 16
Figure 102 – Requirements for insulation between separate circuits and between
circuits and ACCESSIBLE conductive parts . 22
Figure 103 – Mechanical HAZARDS, with regard to PANEL MOUNTED EQUIPMENT . 28
Figure 104 – Spread of fire HAZARDS, with regard to PANEL MOUNTED EQUIPMENT . 30
Figure 105 – General temperature test environment . 33
Figure 106 – Vented equipment . 34
Figure 107 – Non-vented equipment . 35
Figure 108 – Panel mounted device extending through the wall of a cabinet . 36
---------------------- Page: 14 ----------------------
SIST EN IEC 61010-2-201:2018
IEC 61010-2-201:2017 © IEC 2017 – 3 –
Figure AA.1 – Control equipment access and safety concerns . 46
Figure BB.1 – Typical system ENCLOSURE layout . 49
Figure BB.2 – Simplified system schematic . 50
Figure BB.3 – HAZARD situation of the control equipment . 51
Figure BB.4 – Application of the standard to the control equipment safety drawing . 52
Figure BB.5 – Application of 6.7.1.5 items a) and b) to the control equipment safety
drawing . 52
Figure BB.6 – Application of 6.7.1.5 items a), b), c) and d) to the control equipment
safety drawing . 53
Figure BB.7 – REINFORCED INSULATION . 54
Figure BB.8 – BASIC INSULATION . 55
Figure BB.9 – REINFORCED INSULATION, BASIC INSULATION and PROTECTIVE IMPEDANCE . 56
Figure BB.10 – REINFORCED INSULATION from external power supplies . 57
Figure BB.11 – BASIC INSULATION from external power supplies . 58
Figure EE.1 – Information/documentation for component products . 64
Figure EE.2 – Information/documentation accumulation and segregation tree for an
example installation . 65
Figure FF.1 – The path a component mounted to a PWB (side view). 67
Figure FF.2 – The path a component mounted to a PWB (side view). 67
Table 101 – Overload test circuit values . 12
Table 102 – Endurance test circuit values . 13
Table 103 – OPERATOR ACCESSIBLE ports for open and ENCLOSED EQUIPMENT . 17
Table 4 – CLEARANCE and CREEPAGE DISTANCES for MAINS CIRCUITs of OVERVOLTAGE
CATEGORY II up to 300 V. 24
Table 5 – Test voltages for solid insulation between MAINS and between MAINS and
d
secondary circuits OVERVOLTAGE CATEGORY II up to 300 V . 25
Table 6 – CLEARANCES and test voltages for secondary circuits derived from MAINS
CIRCUITs of OVERVOLTAGE CATEGORY II up to 300 V . 26
Table 104 – Minimum CREEPAGE and CLEARANCE in air of OVERVOLTAGE CATEGORY II up
d, e
to 1 000 V at FIELD-WIRING TERMINALS . 27
Table 19 – Surface temperature limits, under NORMAL CONDITION . 31
Table E.1 – Environmental situations . 41
Table E.2 – Reduction of POLLUTION DEGREES (PD) . 42
Table CC.1 – Limits of output current and output power for inherently limited power
...
SLOVENSKI STANDARD
SIST EN 61010-2-201:2018
01-oktober-2018
1DGRPHãþD
SIST EN 61010-2-201:2013
SIST EN 61010-2-201:2013/AC:2014
9DUQRVWQH]DKWHYH]DHOHNWULþQRRSUHPR]DPHULWYHQDG]RURYDQMHLQODERUDWRULMVNR
XSRUDERGHO 3RVHEQH]DKWHYH]DRSUHPR]DQDG]RULQXSUDYOMDQMH ,(&
Safety requirements for electrical equipment for measurement, control and laboratory
use - Part 2-201: Particular requirements for control equipment (IEC 61010-2-201:2017)
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2
-201: Besondere Anforderungen für Steuer- und Regelgeräte (IEC 61010-2-201:2017)
Règles de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire - Partie 2-201: Exigences particulières pour les équipements de commande
(IEC 61010-2-201:2017)
Ta slovenski standard je istoveten z: EN IEC 61010-2-201:2018
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
SIST EN 61010-2-201:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61010-2-201:2018
---------------------- Page: 2 ----------------------
SIST EN 61010-2-201:2018
EUROPEAN STANDARD EN IEC 61010-2-201
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2018
ICS 17.020; 19.020; 25.040.40 Supersedes EN 61010-2-201:2013
English Version
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-201: Particular requirements
for control equipment
(IEC 61010-2-201:2017)
Exigences de sécurité pour appareils électriques de Sicherheitsbestimmungen für elektrische Mess-, Steuer-,
mesurage, de régulation et de laboratoire - Partie 2-201: Regel- und Laborgeräte - Teil 2-201: Besondere
Exigences particulières pour les équipements de Anforderungen für Steuer- und Regelgeräte
commande (IEC 61010-2-201:2017)
(IEC 61010-2-201:2017)
This European Standard was approved by CENELEC on 2017-02-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61010-2-201:2018 E
---------------------- Page: 3 ----------------------
SIST EN 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
European foreword
The text of document 65/652/FDIS, future edition 2 of IEC 61010-2-201, prepared by
IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61010-2-201:2018.
The following dates are fixed:
(dop) 2018-12-22
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2023-06-22
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61010-2-201:2013 and EN 61010-2-201:2013/AC:2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directives.
For the relationship with EU Directives see informative Annex ZZ, which is integral part of this
document.
Endorsement notice
The text of the International Standard IEC 61010-2-201:2017 was approved by CENELEC as a
European Standard without any modification.
The Bibliography of EN 61010-1:2010 applies, except as follows:
Addition:
IEC 60079 (series) NOTE Harmonized as EN 60079 (series).
IEC 60364 (series) NOTE Harmonized as HD 60364 (series).
IEC 60364-4-41 NOTE Harmonized as HD 60364-4-41.
1 1
IEC 60664-5 NOTE Harmonized as EN 60664-5 .
IEC 60715 NOTE Harmonized as EN 60715.
IEC 60721-2-3 NOTE Harmonized as EN 60721-2-3.
IEC 61131-2:2007 NOTE Harmonized as EN 61131-2:2007 (not modified).
IEC 61131-6 NOTE Harmonized as EN 61131-6.
IEC 61140 NOTE Harmonized as EN 61140.
IEC 61326 (series) NOTE Harmonized as EN 61326 (series).
IEC 61508 (series) NOTE Harmonized as EN 61508 (series).
IEC 61643 (series) NOTE Harmonized as EN 61643 (series).
IEC 61800 (series) NOTE Harmonized as EN 61800 (series).
IEC 62133 NOTE Harmonized as EN 62133.
IEC 62368 (series) NOTE Harmonized as EN 62368 (series).
1
Withdrawn publication.
2
---------------------- Page: 4 ----------------------
SIST EN 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 60027 series Letter symbols to be used in electrical EN 60027 series
IEC 60065 (mod) - Audio, video and similar electronic EN 60065 2014
apparatus - Safety requirements
- - + A11 2017
IEC 60068-2-14 - Environmental testing -- Part 2-14: Tests - EN 60068-2-14 2009
Test N: Change of temperature
IEC 60068-2-75 - Environmental testing - Part 2-75: Tests - EN 60068-2-75 2014
Test Eh: Hammer tests
IEC 60073 - Basic and safety principles for man- EN 60073 2002
machine interface, marking and
identification - Coding principles for
indicators and actuators
IEC 60227 series Polyvinyl chloride insulated cables of rated - -
voltages up to and including 450/750
IEC 60245 series Rubber insulated cables - Rated voltages - -
up to and including 450/750 V
IEC 60309 series Plugs, socket-outlets and couplers for EN 60309 series
industrial purposes
IEC 60320 series Appliance couplers for household and EN 60320 series
similar general purposes -
IEC 60332-1-2 - Tests on electric and optical fibre cables EN 60332-1-2 2004
under fire conditions -- Part 1-2: Test for
vertical flame propagation for a single
insulated wire or cable - Procedure for 1
kW pre-mixed flame
- - + A1 2015
- - + A11 2016
IEC 60332-2-2 - Tests on electric and optical fibre cables EN 60332-2-2 2004
under fire conditions -- Part 2-2: Test for
vertical flame propagation for a single
small insulated wire or cable - Procedure
for diffusion flame
3
---------------------- Page: 5 ----------------------
SIST EN 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
IEC 60335-2-24 - Household and similar electrical appliances EN 60335-2-24 2010
- Safety -- Part 2-24: Particular
requirements for refrigerating appliances,
ice-cream appliances and ice makers
IEC 60335-2-89 - Household and similar electrical appliances EN 60335-2-89 2010
- Safety -- Part 2-89: Particular
requirements for commercial refrigerating
appliances with an incorporated or remote
refrigerant condensing unit or compressor
- - + A1 2016
- - + A2 2017
IEC 60364-4-44 2007 Low-voltage electrical installations -- Part HD 60364-4-442 2012
(mod) 4-44: Protection for safety - Protection HD 60364-4-444 2010
against voltage disturbances and
electromagnetic disturbances
+ A1 (mod) 2015 HD 60364-4-443 2016
IEC 60384-14 - Fixed capacitors for use in electronic EN 60384-14 2013
equipment -- Part 14: Sectional
specification - Fixed capacitors for
electromagnetic interference suppression
and connection to the supply mains
2
IEC 60417 1973 Graphical symbols for use on equipment - -
2
IEC 60529 2013 Degrees of protection provided by - -
enclosures (IP Code)
IEC 60664-1 - Insulation coordination for equipment EN 60664-1 2007
within low-voltage systems -- Part 1:
Principles, requirements and tests
IEC 60664-3 - Insulation coordination for equipment EN 60664-3 2017
within low-voltage systems - Part 3: Use of
coating, potting or moulding for protection
against pollution
IEC 60695-2-11 - Fire hazard testing - Part 2-11: EN 60695-2-11 2014
Glowing/hot-wire based test methods -
Glow-wire flammability test method for
end-products (GWEPT)
IEC 60695-11-3 - Fire hazard testing -- Part 11-3: Test EN 60695-11-3 2012
flames - 500 W flames - Apparatus and
confirmational test methods
IEC 60695-11-10 - Fire hazard testing -- Part 11-10: Test EN 60695-11-10 2013
flames - 50 W horizontal and vertical flame
test methods
2
IEC 60799 2018 Electrical accessories – Cord sets and - -
interconnection cord sets
IEC 60825-1 - Safety of laser products -- Part 1: EN 60825-1 2014
Equipment classification and requirements
- - EN 60825- 2017
1:2014/AC:2017-06
IEC 60947-1 2007 Low-voltage switchgear and controlgear -- EN 60947-1 2007
Part 1: General rules
2
Dated as no equivalent European Standard exists.
4
---------------------- Page: 6 ----------------------
SIST EN 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
- - + A1 2011
- - + A2 2014
IEC 60947-2 - Low voltage switchgear and controlgear - EN 60947-2 2017
Part 2: Circuit-breakers
IEC 60947-3 - Low-voltage switchgear and controlgear -- EN 60947-3 2009
Part 3: Switches, disconnectors, switch-
disconnectors and fuse-combination units
- + A1 2012
- + A2 2015
IEC 60947-5-1 - Low-voltage switchgear and controlgear - EN 60947-5-1 2017
Part 5-1: Control circuit devices and
switching elements - Electromechanical
control circuit devices
IEC 61010-1 2010 Safety requirements for electrical EN 61010-1 2010
equipment for measurement, control and
laboratory use -- Part 1: General
requirements
IEC 61010-2-030 - Safety requirements for electrical EN 61010-2-030 2010
equipment for measurement, control and
laboratory use -- Part 2-030: Particular
requirements for testing and measuring
circuits
IEC 61010-031 - Safety requirements for electrical EN 61010-031 2015
equipment for measurement, control and
laboratory use -- Part 031: Safety
requirements for hand-held probe
assemblies for electrical measurement and
test
2
IEC 61051-2 1991 Varistors for use in electronic equipment -- - -
Part 2: Sectional specification for surge
suppression varistors
IEC 61180 series High-voltage test techniques for low- EN 61180 series
voltage equipment -- Part 1: Definitions,
test and procedure requirements
IEC 61180-1 - High-voltage test techniques for low- EN 61180-1 1994
voltage equipment -- Part 1: Definitions,
test and procedure requirements
IEC 61180-2 - High-voltage test techniques for low- EN 61180-2 1994
voltage equipment -- Part 2: Test
equipment
2
IEC 61643-21 2000 Low voltage surge protective devices -- - -
Part 21: Surge protective devices
connected to telecommunications and
signalling networks - Performance
requirements and testing methods
IEC 61643-311 - Components for low-voltage surge EN 61643-311 2013
protective devices -- Part 311:
Performance requirements and test circuits
and methods for gas discharge tubes
(GDT)
5
---------------------- Page: 7 ----------------------
SIST EN 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
IEC 61643-321 - Components for low-voltage surge EN 61643-321 2002
protective devices -- Part 321:
Specifications for Avalanche Breakdown
Diode (ABD)
IEC 61643-331 - Components for low-voltage surge EN 61643-331 2003
protective devices -- Part 331:
Specification for metal oxide varistors
(MOV)
IEC 61672-1 - Electroacoustics - Sound level meters -- EN 61672-1 2013
Part 1: Specifications
IEC 61672-2 - Electroacoustics - Sound level meters -- EN 61672-2 2013
Part 2: Pattern evaluation tests
- - + A1 2017
IEC 62262 - Degrees of protection provided by EN 62262 2002
enclosures for electrical equipment against
external mechanical impacts (IK code)
IEC 62471 (mod) - Photobiological safety of lamps and lamp EN 62471 2008
systems
2
IEC/TR 62471-2 2009 Photobiological safety of lamps and lamp - -
systems - Part 2: Guidance on
manufacturing requirements relating to
non-laser optical radiation safety
IEC 62598 - Nuclear instrumentation - Constructional EN 62598 2013
requirements and classification of
radiometric gauges
2
IEC Guide 104 2010 The preparation of safety publications and - -
the use of basic safety publications and
group safety publications
ISO/IEC Guide 51 2014 Safety aspects - Guidelines for their - -
inclusion in standards
ISO 306 2013 Plastics - Thermoplastic materials - EN ISO 306 2013
Determination of Vicat softening
temperature (VST)
2
ISO 361 1975 Basic ionizing radiation symbol - -
ISO 3746 - Acoustics - Determination of sound power EN ISO 3746 2010
levels and sound energy levels of noise
sources using sound pressure - Survey
method using an enveloping measurement
surface over a reflecting plane
2
ISO 7000 2014 Graphical symbols for use on equipment - - -
Registered symbols
ISO 9614-1 - Acoustics - Determination of sound power EN ISO 9614-1 2009
levels of noise sources using sound
intensity -- Part 1: Measurement at discrete
points
ISO 13857 - Safety of machinery - Safety distances to EN ISO 13857 2008
prevent hazard zones being reached by
upper and lower limbs
6
---------------------- Page: 8 ----------------------
SIST EN 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
2
EN 378-2 2016 Refrigerating systems and heat pumps –
Safety and environmental requirements.
Design, construction, testing, marking and
documentation
7
---------------------- Page: 9 ----------------------
SIST EN 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
Annex ZZ
(informative)
Relationship between this European standard and the safety
objectives of Directive 2014/35/EU [2014 OJ L96] aimed to be
covered
This European Standard has been prepared under a Commission’s standardization request relating to
harmonized standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means
of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the
Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the
making available on the market of electrical equipment designed for use within certain voltage limits
[2014 OJ L96].
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding safety objectives of
that Directive, and associated EFTA regulations.
Table ZZ.1 – Correspondence between this European standard EN 61010-1:2018 and Annex I of
Directive 2014/35/EU [2014 OJ L96]
Clause(s) / sub-
Safety objectives of Directive
clause(s)
Remarks / Notes
2014/35/EU (Annex I)
of this EN
1. General conditions
5.1,
1 (a) the essential characteristics, the
5.2,
recognition and observance of which will
5.4
ensure that electrical equipment will be
used safely and in applications for which it
was made, shall be marked on the
electrical equipment, or, if this is not
possible, on an accompanying document
6.6,
1 (b) the electrical equipment, together
6.10,
with its component parts, shall be made in
Annex F
such a way as to ensure that it can be
safely and properly assembled and
connected
5.4,
1 (c) the electrical equipment shall be so
17 (for
designed and manufactured as to ensure
hazards not
that protection against the hazards set out
covered by
in points 2 and 3 is assured, providing that
clauses 6-16)
the equipment is used in applications for
See also the
which it was made and is adequately
details in
maintained
points 2 and 3
8
---------------------- Page: 10 ----------------------
SIST EN 61010-2-201:2018
EN IEC 61010-2-201:2018 (E)
Clause(s) / sub-
Safety objectives of Directive
clause(s)
Remarks / Notes
2014/35/EU (Annex I)
of this EN
2. Protection against hazards arising from the electrical equipment
Measures of a technical nature shall be laid down in accordance with point 1, in order to ensure that:
4, 6.1 – 6.10,
2 (a) persons and domestic animals are
9.6, 11.2,
adequately protected against the danger
11.6, Annex F,
of physical injury or other harm which
Annex K
might be caused by direct or indirect
contact
4.4.4.2, 9.5,
2 (b) temperatures, arcs or radiation which
9.6, 10.1, -
would cause a danger, are not produced
10.5, 12
4.4, 7.2 - 7.6,
2 (c) persons, domestic animals and
9, 12.3 - 12.6,
property are adequately protected against
13.2.2, 13.2.3,
non-electrical dangers caused by the
16.2,
electrical equipment which are revealed
Annex DD
by experience
6.7, Annex K
2 (d) the insulation is suitable for
foreseeable conditions
3. Protection against hazards which may be caused by external influences on the electrical
equipment
Technical measures shall be laid down in accordance with point 1, in order to ensure that the electrical
equipment:
7, 8
3 (a) meets the expected mechanical
requirements in such a way that persons,
domestic animals and property are not
endangered
1.4, 6.7.2.2.1,
3 (b) is resistant to non-mechanical
10.5, 11.6,
influences in expected environmental
14.3, 14.8,
conditions, in such a way that persons,
14.101,
domestic animals and property are not
14.102
endangered
4, 9, 14, 16.1
3 (c) does not endanger persons,
domestic animals and property in
foreseeable conditions of overload
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
9
---------------------- Page: 11 ----------------------
SIST EN 61010-2-201:2018
---------------------- Page: 12 ----------------------
SIST EN 61010-2-201:2018
IEC 61010-2-201
®
Edition 2.0 2017-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Safety requirements for electrical equipment for measurement, control, and
laboratory use –
Part 2-201: Particular requirements for control equipment
Exigences de sécurité pour appareils électriques de mesurage, de régulation
et de laboratoire –
Partie 2-201: Exigences particulières pour les équipements de commande
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.020; 19.020; 25.040.40 ISBN 978-2-8322-4009-0
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 13 ----------------------
SIST EN 61010-2-201:2018
– 2 – IEC 61010-2-201:2017 © IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope and object . 7
2 Normative references . 9
3 Terms and definitions . 9
4 Tests . 12
5 Marking and documentation . 13
6 Protection against electric shock . 14
7 Protection against mechanical HAZARDS . 28
8 Resistance to mechanical stresses . 29
9 Protection against the spread of fire . 30
10 Equipment temperature limits and resistance to heat . 31
11 Protection against HAZARDS from fluids . 37
12 Protection against radiation, including laser sources, and against sonic and
ultrasonic pressure . 37
13 Protection against liberated gases and substances, explosion and implosion . 37
14 Components and subassemblies . 38
15 Protection by interlocks . 39
16 HAZARDS resulting from application . 39
17 RISK assessment . 39
Annexes . 40
Annex E (informative) Guideline for reduction of POLLUTION DEGREES . 41
Annex F (normative) ROUTINE TESTS . 43
Annex L (informative) Index of defined terms . 45
Annex AA (informative) General approach to safety for control equipment . 46
Annex BB (informative) System drawing of isolation boundaries . 48
Annex CC (informative) Historical techniques for secondary circuits . 59
Annex DD (normative) Flammability test for magnesium alloy fire ENCLOSUREs or
flame barriers (see 9.3.2) . 63
Annex EE (informative) Information/documentation and correlation to its uses . 64
Annex FF (informative) Measurement of CLEARANCES and CREEPAGE DISTANCES . 66
Bibliography . 68
Figure 101 – Typical interface/port diagram of control equipment . 16
Figure 102 – Requirements for insulation between separate circuits and between
circuits and ACCESSIBLE conductive parts . 22
Figure 103 – Mechanical HAZARDS, with regard to PANEL MOUNTED EQUIPMENT . 28
Figure 104 – Spread of fire HAZARDS, with regard to PANEL MOUNTED EQUIPMENT . 30
Figure 105 – General temperature test environment . 33
Figure 106 – Vented equipment . 34
Figure 107 – Non-vented equipment . 35
Figure 108 – Panel mounted device extending through the wall of a cabinet . 36
---------------------- Page: 14 ----------------------
SIST EN 61010-2-201:2018
IEC 61010-2-201:2017 © IEC 2017 – 3 –
Figure AA.1 – Control equipment access and safety concerns . 46
Figure BB.1 – Typical system ENCLOSURE layout . 49
Figure BB.2 – Simplified system schematic . 50
Figure BB.3 – HAZARD situation of the control equipment . 51
Figure BB.4 – Application of the standard to the control equipment safety drawing . 52
Figure BB.5 – Application of 6.7.1.5 items a) and b) to the control equipment safety
drawing . 52
Figure BB.6 – Application of 6.7.1.5 items a), b), c) and d) to the control equipment
safety drawing . 53
Figure BB.7 – REINFORCED INSULATION . 54
Figure BB.8 – BASIC INSULATION . 55
Figure BB.9 – REINFORCED INSULATION, BASIC INSULATION and PROTECTIVE IMPEDANCE . 56
Figure BB.10 – REINFORCED INSULATION from external power supplies . 57
Figure BB.11 – BASIC INSULATION from external power supplies . 58
Figure EE.1 – Information/documentation for component products . 64
Figure EE.2 – Information/documentation accumulation and segregation tree for an
example installation . 65
Figure FF.1 – The path a component mounted to a PWB (side view). 67
Figure FF.2 – The path a component mounted to a PWB (side view). 67
Table 101 – Overload test circuit values . 12
Table 102 – Endurance test circuit values . 13
Table 103 – OPERATOR ACCESSIBLE ports for open and ENCLOSED EQUIPMENT . 17
Table 4 – CLEARANCE and CREEPAGE DISTANCES for MAINS CIRCUITs of OVERVOLTAGE
CATEGORY II up to 300 V. 24
Table 5 – Test voltages for solid insulation between MAINS and between MAINS and
d
secondary circuits OVERVOLTAGE CATEGORY II up to 300 V . 25
Table 6 – CLEARANCES and test voltages for secondary circuits derived from MAINS
CIRCUITs of OVERVOLTAGE CATEGORY II up to 300 V . 26
Table 104 – Minimum CREEPAGE and CLEARANCE in air of OVERVOLTAGE CATEGORY II up
d, e
to 1 000 V at FIELD-WIRING TERMINALS . 27
Table 19 – Surface temperature limits, under NORMAL CONDITION . 31
Table E.1 – Environmental situations . 41
Table E.2 – Reduction of POLLUTION DEGREES (PD) . 42
Table CC.1 – Limits of output current and output power for inherently limited power
sources .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.