EN IEC 61010-2-201:2018

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment

NEW!IEC 61010-2-201:2017 is available as IEC 61010-2-201:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61010-2-201:2017 specifies safety requirements and related verification tests for any product performing the function of control equipment and/or their associated peripherals. In addition, these products have as their intended use the command and control of machines, automated manufacturing and industrial processes, e.g. discrete and continuous control. This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This second edition includes the following significant technical changes with respect to the previous edition; a) clarify, change, delete definitions which were causing confusion, b) change and clarify the temperature testing methodology, c) change documentation methodologies allowed, d) change some terminal markings, e) add clarity to some of the informative annexes, f) add Annex E with changes, g) add Annexes AA – FF.

Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2-201: Besondere Anforderungen für Steuer- und Regelgeräte

Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-201: Exigences particulières pour les équipements de commande

NEW!IEC 61010-2-201:2017 est disponible sous forme de IEC 61010-2-201:2017 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 61010-2-201:2017 spécifie les exigences de sécurité et les essais de vérification associés pour les produits remplissant la fonction d'équipements de commande et/ou leurs périphériques associés. L'utilisation prévue de ces produits consiste à contrôler et commander les machines, les processus industriels et de fabrication automatisés, par exemple par le biais d'un contrôle discret et continu. Cette deuxième édition annule et remplace la première édition parue en 2013. Cette édition constitue une révision technique.Cette deuxième édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) clarification, modification et suppression des définitions sources de confusion, b) modification et clarification de la méthode d'essai des températures, c) modification des méthodologies de documentation admises, d) modification de quelques marquages de BORNES, e) clarification de certaines annexes informatives, f) ajout de l'Annexe E qui a elle-même fait l'objet de modifications, g) ajout des Annexes AA à FF.

Varnostne zahteve za električno opremo za meritve, nadzorovanje in laboratorijsko uporabo - 2-201. del: Posebne zahteve za opremo za nadzor in upravljanje (IEC 61010-2-201:2017)

Ta del standarda IEC 61010 določa varnostne zahteve in z njimi povezane preskuse preverjanja za kateri koli proizvod, ki deluje kot oprema za nadzor ter upravljanje, in/ali z njim povezane periferne naprave.
Poleg tega je predvideni namen uporabe teh proizvodov upravljanje in nadzor strojev ter avtomatiziranih proizvodnih in industrijskih procesov, npr. diskreten in neprekinjen nadzor. Nekateri primeri opreme: programirljivi logični krmilnik (PLC);
• programirljivi avtomatizacijski krmilnik (PAC);
• porazdeljeni nadzorni sistemi (DCS);
• daljinski I/O;
• industrijski osebni računalniki in panelni osebni računalniki;
• orodja za programiranje in iskanje napak (PADT);
• zasloni in vmesniki človek-stroj (HMI);
• naprave za pozicioniranje.
Komponente zgoraj omenjene opreme, ki spadajo na področje uporabe tega standarda, so:
• (pomožni) samostojni električni napajalniki;
• periferne naprave, kot so digitalni in analogni I/O ter daljinski I/O;
• industrijska omrežna oprema.
Oprema za nadzor in upravljanje ter z njo povezane periferne naprave so namenjene uporabi v industrijskem okolju in so lahko na voljo kot ODPRTA ali ZAPRTA OPREMA.

General Information

• Status: Published
• Publication Date: 21-Jun-2018
• ICS: 13.110 - Safety of machinery
• ICS: 17.020 - Metrology and measurement in general
• ICS: 19.020 - Test conditions and procedures in general
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/TC 65 - IEC_TC_65
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Jun-2018
• Completion Date: 22-Jun-2018
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Mandate: M/552 - [C(2016) 7641 final] Standardisation request as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility
• Ref Project: SIST EN IEC 61010-2-201:2018 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment (IEC 61010-2-201:2017)

Relations

• Replaces: EN 61010-2-201:2013 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment
• Effective Date: 24-Jan-2023
• Replaces: EN 61010-2-201:2013/AC:2013 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment
• Effective Date: 26-Jun-2018
• Revised: FprEN IEC 61010-2-201:2024 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment
• Effective Date: 24-Dec-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61010-2-201:2018
01-oktober-2018
1DGRPHãþD
SIST EN 61010-2-201:2013
SIST EN 61010-2-201:2013/AC:2014
9DUQRVWQH]DKWHYH]DHOHNWULþQRRSUHPR]DPHULWYHQDG]RURYDQMHLQODERUDWRULMVNR
XSRUDERGHO3RVHEQH]DKWHYH]DRSUHPR]DQDG]RULQXSUDYOMDQMH,(&

Safety requirements for electrical equipment for measurement, control and laboratory
use - Part 2-201: Particular requirements for control equipment (IEC 61010-2-201:2017)
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2
-201: Besondere Anforderungen für Steuer- und Regelgeräte (IEC 61010-2-201:2017)
Règles de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire - Partie 2-201: Exigences particulières pour les équipements de commande
(IEC 61010-2-201:2017)
Ta slovenski standard je istoveten z: EN IEC 61010-2-201:2018
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
SIST EN 61010-2-201:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 61010-2-201:2018
SIST EN 61010-2-201:2018
EUROPEAN STANDARD EN IEC 61010-2-201

NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2018
ICS 17.020; 19.020; 25.040.40 Supersedes EN 61010-2-201:2013
English Version
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-201: Particular requirements
for control equipment
(IEC 61010-2-201:2017)
Exigences de sécurité pour appareils électriques de Sicherheitsbestimmungen für elektrische Mess-, Steuer-,
mesurage, de régulation et de laboratoire - Partie 2-201: Regel- und Laborgeräte - Teil 2-201: Besondere
Exigences particulières pour les équipements de Anforderungen für Steuer- und Regelgeräte
commande (IEC 61010-2-201:2017)
(IEC 61010-2-201:2017)
This European Standard was approved by CENELEC on 2017-02-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61010-2-201:2018 E

SIST EN 61010-2-201:2018
European foreword
The text of document 65/652/FDIS, future edition 2 of IEC 61010-2-201, prepared by
IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61010-2-201:2018.

The following dates are fixed:
(dop) 2018-12-22
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2023-06-22
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61010-2-201:2013 and EN 61010-2-201:2013/AC:2013.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directives.

For the relationship with EU Directives see informative Annex ZZ, which is integral part of this
document.
Endorsement notice
The text of the International Standard IEC 61010-2-201:2017 was approved by CENELEC as a
European Standard without any modification.
The Bibliography of EN 61010-1:2010 applies, except as follows:

Addition:
IEC 60079 (series) NOTE Harmonized as EN 60079 (series).
IEC 60364 (series) NOTE Harmonized as HD 60364 (series).
IEC 60364-4-41 NOTE Harmonized as HD 60364-4-41.
1 1
IEC 60664-5 NOTE Harmonized as EN 60664-5 .
IEC 60715 NOTE Harmonized as EN 60715.
IEC 60721-2-3 NOTE Harmonized as EN 60721-2-3.
IEC 61131-2:2007 NOTE Harmonized as EN 61131-2:2007 (not modified).
IEC 61131-6 NOTE Harmonized as EN 61131-6.
IEC 61140 NOTE Harmonized as EN 61140.
IEC 61326 (series) NOTE Harmonized as EN 61326 (series).
IEC 61508 (series) NOTE Harmonized as EN 61508 (series).
IEC 61643 (series) NOTE Harmonized as EN 61643 (series).
IEC 61800 (series) NOTE Harmonized as EN 61800 (series).
IEC 62133 NOTE Harmonized as EN 62133.
IEC 62368 (series) NOTE Harmonized as EN 62368 (series).

Withdrawn publication.
SIST EN 61010-2-201:2018
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 60027 series Letter symbols to be used in electrical EN 60027 series
IEC 60065 (mod) - Audio, video and similar electronic EN 60065 2014
apparatus - Safety requirements
- -  + A11 2017
IEC 60068-2-14 - Environmental testing -- Part 2-14: Tests - EN 60068-2-14 2009
Test N: Change of temperature
IEC 60068-2-75 - Environmental testing - Part 2-75: Tests - EN 60068-2-75 2014
Test Eh: Hammer tests
IEC 60073 - Basic and safety principles for man- EN 60073 2002
machine interface, marking and
identification - Coding principles for
indicators and actuators
IEC 60227 series Polyvinyl chloride insulated cables of rated - -
voltages up to and including 450/750
IEC 60245 series Rubber insulated cables - Rated voltages - -
up to and including 450/750 V
IEC 60309 series Plugs, socket-outlets and couplers for EN 60309 series
industrial purposes
IEC 60320 series Appliance couplers for household and EN 60320 series
similar general purposes -
IEC 60332-1-2 - Tests on electric and optical fibre cables EN 60332-1-2 2004
under fire conditions -- Part 1-2: Test for
vertical flame propagation for a single
insulated wire or cable - Procedure for 1
kW pre-mixed flame
- - + A1 2015
- -  + A11 2016
IEC 60332-2-2 - Tests on electric and optical fibre cables EN 60332-2-2 2004
under fire conditions -- Part 2-2: Test for
vertical flame propagation for a single
small insulated wire or cable - Procedure
for diffusion flame
SIST EN 61010-2-201:2018
IEC 60335-2-24 - Household and similar electrical appliances EN 60335-2-24 2010
- Safety -- Part 2-24: Particular
requirements for refrigerating appliances,
ice-cream appliances and ice makers
IEC 60335-2-89 - Household and similar electrical appliances EN 60335-2-89 2010
- Safety -- Part 2-89: Particular
requirements for commercial refrigerating
appliances with an incorporated or remote
refrigerant condensing unit or compressor
- -  + A1 2016
- - + A2 2017
IEC 60364-4-44 2007 Low-voltage electrical installations -- Part HD 60364-4-442 2012
(mod) 4-44: Protection for safety - Protection HD 60364-4-444 2010
against voltage disturbances and
electromagnetic disturbances
+ A1 (mod) 2015  HD 60364-4-443 2016
IEC 60384-14 - Fixed capacitors for use in electronic EN 60384-14 2013
equipment -- Part 14: Sectional
specification - Fixed capacitors for
electromagnetic interference suppression
and connection to the supply mains
IEC 60417 1973 Graphical symbols for use on equipment - -
IEC 60529 2013 Degrees of protection provided by - -
enclosures (IP Code)
IEC 60664-1 - Insulation coordination for equipment EN 60664-1 2007
within low-voltage systems -- Part 1:
Principles, requirements and tests
IEC 60664-3 - Insulation coordination for equipment EN 60664-3 2017
within low-voltage systems - Part 3: Use of
coating, potting or moulding for protection
against pollution
IEC 60695-2-11 - Fire hazard testing - Part 2-11: EN 60695-2-11 2014
Glowing/hot-wire based test methods -
Glow-wire flammability test method for
end-products (GWEPT)
IEC 60695-11-3 - Fire hazard testing -- Part 11-3: Test EN 60695-11-3 2012
flames - 500 W flames - Apparatus and
confirmational test methods
IEC 60695-11-10 - Fire hazard testing -- Part 11-10: Test EN 60695-11-10 2013
flames - 50 W horizontal and vertical flame
test methods
IEC 60799 2018 Electrical accessories – Cord sets and - -
interconnection cord sets
IEC 60825-1 - Safety of laser products -- Part 1: EN 60825-1 2014
Equipment classification and requirements
- - EN 60825- 2017
1:2014/AC:2017-06
IEC 60947-1 2007 Low-voltage switchgear and controlgear -- EN 60947-1 2007
Part 1: General rules
Dated as no equivalent European Standard exists.
SIST EN 61010-2-201:2018
- - + A1 2011
- - + A2 2014
IEC 60947-2 - Low voltage switchgear and controlgear - EN 60947-2 2017
Part 2: Circuit-breakers
IEC 60947-3 - Low-voltage switchgear and controlgear -- EN 60947-3 2009
Part 3: Switches, disconnectors, switch-
disconnectors and fuse-combination units
- + A1 2012
- + A2 2015
IEC 60947-5-1 - Low-voltage switchgear and controlgear - EN 60947-5-1 2017
Part 5-1: Control circuit devices and
switching elements - Electromechanical
control circuit devices
IEC 61010-1 2010 Safety requirements for electrical EN 61010-1 2010
equipment for measurement, control and
laboratory use -- Part 1: General
requirements
IEC 61010-2-030 - Safety requirements for electrical EN 61010-2-030 2010
equipment for measurement, control and
laboratory use -- Part 2-030: Particular
requirements for testing and measuring
circuits
IEC 61010-031 - Safety requirements for electrical EN 61010-031 2015
equipment for measurement, control and
laboratory use -- Part 031: Safety
requirements for hand-held probe
assemblies for electrical measurement and
test
IEC 61051-2 1991 Varistors for use in electronic equipment -- - -
Part 2: Sectional specification for surge
suppression varistors
IEC 61180 series High-voltage test techniques for low- EN 61180 series
voltage equipment -- Part 1: Definitions,
test and procedure requirements
IEC 61180-1 - High-voltage test techniques for low- EN 61180-1 1994
voltage equipment -- Part 1: Definitions,
test and procedure requirements
IEC 61180-2 - High-voltage test techniques for low- EN 61180-2 1994
voltage equipment -- Part 2: Test
equipment
IEC 61643-21 2000 Low voltage surge protective devices -- - -
Part 21: Surge protective devices
connected to telecommunications and
signalling networks - Performance
requirements and testing methods
IEC 61643-311 - Components for low-voltage surge EN 61643-311 2013
protective devices -- Part 311:
Performance requirements and test circuits
and methods for gas discharge tubes
(GDT)
SIST EN 61010-2-201:2018
IEC 61643-321 - Components for low-voltage surge EN 61643-321 2002
protective devices -- Part 321:
Specifications for Avalanche Breakdown
Diode (ABD)
IEC 61643-331 - Components for low-voltage surge EN 61643-331 2003
protective devices -- Part 331:
Specification for metal oxide varistors
(MOV)
IEC 61672-1 - Electroacoustics - Sound level meters -- EN 61672-1 2013
Part 1: Specifications
IEC 61672-2 - Electroacoustics - Sound level meters -- EN 61672-2 2013
Part 2: Pattern evaluation tests
- - + A1 2017
IEC 62262 - Degrees of protection provided by EN 62262 2002
enclosures for electrical equipment against
external mechanical impacts (IK code)
IEC 62471 (mod) - Photobiological safety of lamps and lamp EN 62471 2008
systems
IEC/TR 62471-2 2009 Photobiological safety of lamps and lamp - -
systems - Part 2: Guidance on
manufacturing requirements relating to
non-laser optical radiation safety
IEC 62598 - Nuclear instrumentation - Constructional EN 62598 2013
requirements and classification of
radiometric gauges
IEC Guide 104 2010 The preparation of safety publications and - -
the use of basic safety publications and
group safety publications
ISO/IEC Guide 51 2014 Safety aspects - Guidelines for their - -
inclusion in standards
ISO 306 2013 Plastics - Thermoplastic materials - EN ISO 306 2013
Determination of Vicat softening
temperature (VST)
ISO 361 1975 Basic ionizing radiation symbol - -
ISO 3746 - Acoustics - Determination of sound power EN ISO 3746 2010
levels and sound energy levels of noise
sources using sound pressure - Survey
method using an enveloping measurement
surface over a reflecting plane
ISO 7000 2014 Graphical symbols for use on equipment - - -
Registered symbols
ISO 9614-1 -  Acoustics - Determination of sound power EN ISO 9614-1 2009
levels of noise sources using sound
intensity -- Part 1: Mea
...

SLOVENSKI STANDARD
01-oktober-2018
Nadomešča:
SIST EN 61010-2-201:2013
SIST EN 61010-2-201:2013/AC:2014
Varnostne zahteve za električno opremo za meritve, nadzorovanje in laboratorijsko
uporabo - 2-201. del: Posebne zahteve za opremo za nadzor in upravljanje (IEC
61010-2-201:2017)
Safety requirements for electrical equipment for measurement, control and laboratory
use - Part 2-201: Particular requirements for control equipment (IEC 61010-2-201:2017)
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2
-201: Besondere Anforderungen für Steuer- und Regelgeräte (IEC 61010-2-201:2017)
Règles de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire - Partie 2-201: Exigences particulières pour les équipements de commande
(IEC 61010-2-201:2017)
Ta slovenski standard je istoveten z: EN IEC 61010-2-201:2018
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61010-2-201

NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2018
ICS 17.020; 19.020; 25.040.40 Supersedes EN 61010-2-201:2013
English Version
Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-201: Particular requirements
for control equipment
(IEC 61010-2-201:2017)
Exigences de sécurité pour appareils électriques de Sicherheitsbestimmungen für elektrische Mess-, Steuer-,
mesurage, de régulation et de laboratoire - Partie 2-201: Regel- und Laborgeräte - Teil 2-201: Besondere
Exigences particulières pour les équipements de Anforderungen für Steuer- und Regelgeräte
commande (IEC 61010-2-201:2017)
(IEC 61010-2-201:2017)
This European Standard was approved by CENELEC on 2017-02-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61010-2-201:2018 E

European foreword
The text of document 65/652/FDIS, future edition 2 of IEC 61010-2-201, prepared by
IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61010-2-201:2018.

The following dates are fixed:
(dop) 2018-12-22
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2023-06-22
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61010-2-201:2013 and EN 61010-2-201:2013/AC:2013.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directives.

For the relationship with EU Directives see informative Annex ZZ, which is integral part of this
document.
Endorsement notice
The text of the International Standard IEC 61010-2-201:2017 was approved by CENELEC as a
European Standard without any modification.
The Bibliography of EN 61010-1:2010 applies, except as follows:

Addition:
IEC 60079 (series) NOTE Harmonized as EN 60079 (series).
IEC 60364 (series) NOTE Harmonized as HD 60364 (series).
IEC 60364-4-41 NOTE Harmonized as HD 60364-4-41.
1 1
IEC 60664-5 NOTE Harmonized as EN 60664-5 .
IEC 60715 NOTE Harmonized as EN 60715.
IEC 60721-2-3 NOTE Harmonized as EN 60721-2-3.
IEC 61131-2:2007 NOTE Harmonized as EN 61131-2:2007 (not modified).
IEC 61131-6 NOTE Harmonized as EN 61131-6.
IEC 61140 NOTE Harmonized as EN 61140.
IEC 61326 (series) NOTE Harmonized as EN 61326 (series).
IEC 61508 (series) NOTE Harmonized as EN 61508 (series).
IEC 61643 (series) NOTE Harmonized as EN 61643 (series).
IEC 61800 (series) NOTE Harmonized as EN 61800 (series).
IEC 62133 NOTE Harmonized as EN 62133.
IEC 62368 (series) NOTE Harmonized as EN 62368 (series).

Withdrawn publication.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 60027 series Letter symbols to be used in electrical EN 60027 series
IEC 60065 (mod) - Audio, video and similar electronic EN 60065 2014
apparatus - Safety requirements
- -  + A11 2017
IEC 60068-2-14 - Environmental testing -- Part 2-14: Tests - EN 60068-2-14 2009
Test N: Change of temperature
IEC 60068-2-75 - Environmental testing - Part 2-75: Tests - EN 60068-2-75 2014
Test Eh: Hammer tests
IEC 60073 - Basic and safety principles for man- EN 60073 2002
machine interface, marking and
identification - Coding principles for
indicators and actuators
IEC 60227 series Polyvinyl chloride insulated cables of rated - -
voltages up to and including 450/750
IEC 60245 series Rubber insulated cables - Rated voltages - -
up to and including 450/750 V
IEC 60309 series Plugs, socket-outlets and couplers for EN 60309 series
industrial purposes
IEC 60320 series Appliance couplers for household and EN 60320 series
similar general purposes -
IEC 60332-1-2 - Tests on electric and optical fibre cables EN 60332-1-2 2004
under fire conditions -- Part 1-2: Test for
vertical flame propagation for a single
insulated wire or cable - Procedure for 1
kW pre-mixed flame
- - + A1 2015
- -  + A11 2016
IEC 60332-2-2 - Tests on electric and optical fibre cables EN 60332-2-2 2004
under fire conditions -- Part 2-2: Test for
vertical flame propagation for a single
small insulated wire or cable - Procedure
for diffusion flame
IEC 60335-2-24 - Household and similar electrical appliances EN 60335-2-24 2010
- Safety -- Part 2-24: Particular
requirements for refrigerating appliances,
ice-cream appliances and ice makers
IEC 60335-2-89 - Household and similar electrical appliances EN 60335-2-89 2010
- Safety -- Part 2-89: Particular
requirements for commercial refrigerating
appliances with an incorporated or remote
refrigerant condensing unit or compressor
- -  + A1 2016
- - + A2 2017
IEC 60364-4-44 2007 Low-voltage electrical installations -- Part HD 60364-4-442 2012
(mod) 4-44: Protection for safety - Protection HD 60364-4-444 2010
against voltage disturbances and
electromagnetic disturbances
+ A1 (mod) 2015  HD 60364-4-443 2016
IEC 60384-14 - Fixed capacitors for use in electronic EN 60384-14 2013
equipment -- Part 14: Sectional
specification - Fixed capacitors for
electromagnetic interference suppression
and connection to the supply mains
IEC 60417 1973 Graphical symbols for use on equipment - -
IEC 60529 2013 Degrees of protection provided by - -
enclosures (IP Code)
IEC 60664-1 - Insulation coordination for equipment EN 60664-1 2007
within low-voltage systems -- Part 1:
Principles, requirements and tests
IEC 60664-3 - Insulation coordination for equipment EN 60664-3 2017
within low-voltage systems - Part 3: Use of
coating, potting or moulding for protection
against pollution
IEC 60695-2-11 - Fire hazard testing - Part 2-11: EN 60695-2-11 2014
Glowing/hot-wire based test methods -
Glow-wire flammability test method for
end-products (GWEPT)
IEC 60695-11-3 - Fire hazard testing -- Part 11-3: Test EN 60695-11-3 2012
flames - 500 W flames - Apparatus and
confirmational test methods
IEC 60695-11-10 - Fire hazard testing -- Part 11-10: Test EN 60695-11-10 2013
flames - 50 W horizontal and vertical flame
test methods
IEC 60799 2018 Electrical accessories – Cord sets and - -
interconnection cord sets
IEC 60825-1 - Safety of laser products -- Part 1: EN 60825-1 2014
Equipment classification and requirements
- - EN 60825- 2017
1:2014/AC:2017-06
IEC 60947-1 2007 Low-voltage switchgear and controlgear -- EN 60947-1 2007
Part 1: General rules
Dated as no equivalent European Standard exists.
- - + A1 2011
- - + A2 2014
IEC 60947-2 - Low voltage switchgear and controlgear - EN 60947-2 2017
Part 2: Circuit-breakers
IEC 60947-3 - Low-voltage switchgear and controlgear -- EN 60947-3 2009
Part 3: Switches, disconnectors, switch-
disconnectors and fuse-combination units
- + A1 2012
- + A2 2015
IEC 60947-5-1 - Low-voltage switchgear and controlgear - EN 60947-5-1 2017
Part 5-1: Control circuit devices and
switching elements - Electromechanical
control circuit devices
IEC 61010-1 2010 Safety requirements for electrical EN 61010-1 2010
equipment for measurement, control and
laboratory use -- Part 1: General
requirements
IEC 61010-2-030 - Safety requirements for electrical EN 61010-2-030 2010
equipment for measurement, control and
laboratory use -- Part 2-030: Particular
requirements for testing and measuring
circuits
IEC 61010-031 - Safety requirements for electrical EN 61010-031 2015
equipment for measurement, control and
laboratory use -- Part 031: Safety
requirements for hand-held probe
assemblies for electrical measurement and
test
IEC 61051-2 1991 Varistors for use in electronic equipment -- - -
Part 2: Sectional specification for surge
suppression varistors
IEC 61180 series High-voltage test techniques for low- EN 61180 series
voltage equipment -- Part 1: Definitions,
test and procedure requirements
IEC 61180-1 - High-voltage test techniques for low- EN 61180-1 1994
voltage equipment -- Part 1: Definitions,
test and procedure requirements
IEC 61180-2 - High-voltage test techniques for low- EN 61180-2 1994
voltage equipment -- Part 2: Test
equipment
IEC 61643-21 2000 Low voltage surge protective devices -- - -
Part 21: Surge protective devices
connected to telecommunications and
signalling networks - Performance
requirements and testing methods
IEC 61643-311 - Components for low-voltage surge EN 61643-311 2013
protective devices -- Part 311:
Performance requirements and test circuits
and methods for gas discharge tubes
(GDT)
IEC 61643-321 - Components for low-voltage surge EN 61643-321 2002
protective devices -- Part 321:
Specifications for Avalanche Breakdown
Diode (ABD)
IEC 61643-331 - Components for low-voltage surge EN 61643-331 2003
protective devices -- Part 331:
Specification for metal oxide varistors
(MOV)
IEC 61672-1 - Electroacoustics - Sound level meters -- EN 61672-1 2013
Part 1: Specifications
IEC 61672-2 - Electroacoustics - Sound level meters -- EN 61672-2 2013
Part 2: Pattern evaluation tests
- - + A1 2017
IEC 62262 - Degrees of protection provided by EN 62262 2002
enclosures for electrical equipment against
external mechanical impacts (IK code)
IEC 62471 (mod) - Photobiological safety of lamps and lamp EN 62471 2008
systems
IEC/TR 62471-2 2009 Photobiological safety of lamps and lamp - -
systems - Part 2: Guidance on
manufacturing requirements relating to
non-laser optical radiation safety
IEC 62598 - Nuclear instrumentation - Constructional EN 62598 2013
requirements and classification of
radiometric gauges
IEC Guide 104 2010 The preparation of safety publications and - -
the use of basic safety publications and
group safety publications
ISO/IEC Guide 51 2014 Safety aspects - Guidelines for their - -
inclusion in standards
ISO 306 2013 Plastics - Thermoplastic materials - EN ISO 306 2013
Determination of Vicat softening
temperature (VST)
ISO 361 1975 Basic ionizing radiation symbol - -
ISO 3746 - Acoustics - Determination of sound power EN ISO 3746 2010
levels and sound energy levels of noise
sources using sound pressure - Survey
method using an enveloping measurement
surface over a reflecting plane
ISO 7000 2014 Graphical symbols for use on equipment - - -
Registered symbols
ISO 9614-1 -  Acoustics - Determination of sound power EN ISO 9614-1 2009
levels of noise sources using sound
...