SIST EN 13001-1:2005/AC:2007
(Amendment)Cranes - General design - Part 1: General principles and requirements
Cranes - General design - Part 1: General principles and requirements
TC - Modifications to 4.4.2, 4.4.4 and Figures 7 and 8
AFNOR / DIN - Modification to bibliography
CMC - Modification to Clause 2 and 4.1
Krane - Konstruktion allgemein - Teil 1: Allgemeine Prinzipien und Anforderungen
Appareils de levage a charge suspendue - Conception générale - Partie 1: Principes généraux et prescriptions
Dvigala (žerjavi) – Konstrukcija, splošno – 1. del: Splošna načela in zahteve
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cranes - General design - Part 1: General principles and requirementsAppareils de levage a charge suspendue - Conception générale - Partie 1: Principes généraux et prescriptionsKrane - Konstruktion allgemein - Teil 1: Allgemeine Prinzipien und AnforderungenTa slovenski standard je istoveten z:EN 13001-1:2004/AC:2006SIST EN 13001-1:2005/AC:2007en,fr,de53.020.20DvigalaCranesICS:SLOVENSKI
STANDARDSIST EN 13001-1:2005/AC:200701-januar-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13001-1:2004/ACJuly 2006Juillet 2006Juli 2006ICS 53.020.20English versionVersion FrançaiseDeutsche FassungCranes - General design - Part 1: General principles and requirementsAppareils de levage à charge suspendue -Conception générale - Partie 1: Principesgénéraux et prescriptionsKrane - Konstruktion allgemein - Teil 1:Allgemeine Prinzipien und AnforderungenThis corrigendum becomes effective on 5 July 2006 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 5 juillet 2006 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 5.Juli 2006 zur Einarbeitung in die drei offiziellen Sprachfassungen der EN inKraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 13001-1:2004/AC:2006 D/E/F
EN 13001-1:2004/AC:2006 (E/F/D) 2 English version
Clause 2 Replace "EN 1990-1:2002, Eurocode - Basis of structural design." by "EN 1990:2002, Eurocode - Basis of structural design"
Clause 4.1 Replace "ISO EN 12100-1." and “ISO EN 12100-2…” by "EN ISO 12100-1…" and “EN ISO 12100-2…”
Clause 4.4.2, formula 7 Replace "()2/bumσσσ−=" by "()2/bumσσσ+="
Clause 4.4.3, figures 7 and 8 Figure 7 and Figure 8 have to be exchanged as follows:
Figure 7 — maσσ−-plane of the component under consideration for the proof of fatigue strength (simplified Haigh-Diagram)
Figure 8 — Transformation of stress cycles
a) for constant stress ratio, and
b) for constant mean stress
EN 13001-1:2004/AC:2006 (E/F/D) 3 Replace Figure 9 with the following
Clause 4.4.4, Table 6 rows 9-11
Modify as follows: Class S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.