kSIST FprEN IEC 61543:2022
(Main)Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
This document provides specific emission and immunity requirements, tests and performance criteria for residual current-operated protective devices (RCDs), for household and similar use, for rated voltages not exceeding 440 V.
Household and similar use corresponds to the description given in the generic standard IEC 61000-6-1 for residential, commercial, and light-industrial electromagnetic environments.
This document is intended to be referred to by RCD product standards and is not intended to be used as a standalone document.
Residual current-operated protective devices are:
- Residual current operated circuit-breakers without integral overcurrent protection for household and similar use (RCCBs) covered by IEC 61008 series and IEC 62423;
- Residual current operated circuit-breakers with integral overcurrent protection for household and similar use (RCBOs) covered by IEC 61009 series and IEC 62423;
- Residual current devices with or without overcurrent protection for socket-outlets (SRCDs) covered by IEC 62640;
- Portable residual current devices without integral overcurrent protection (PRCDs) covered by IEC 61540;
- Devices with an RCD functionality for household and similar use according product standards following the group safety publications for general safety requirements for RCDs, IEC 60755.
This edition applies if it is referred to as a dated reference in the relevant product standard.
This document is also intended to be used as a guideline in the preparation of EMC requirements and tests for other product standards under the scope of SC 23E. It also specifies generic performance criteria intended to be transformed into specific performance criteria by the relevant product standard.
Note: Examples of other product standards under the scope of SC 23E are:
- IEC 62020-1 "Electrical accessories - Residual current monitors (RCMs) – Part 1: RCMs for household and similar uses";
- IEC 62606 "General requirements for arc fault detection devices";
- IEC 63024 "Requirements for automatic reclosing devices (ARDs) for circuit breakers, RCBOs-RCCBs for household and similar uses";
- IEC 63052 "Power frequency overvoltage protective devices (POPs) for household and similar applications";
- IEC 62752 "In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)";
- IEC 62955 "Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles".
Fehlerstromschutzeinrichtungen (RCDs) für Hausinstallationen und ähnliche Verwendung - Elektromagnetische Verträglichkeit
Dispositifs différentiels résiduels (DDR) pour usages domestiques et analogues - Compatibilité électromagnétique
L'IEC 61543:2022 décrit les exigences spécifiques en matière d'émission et d'immunité, ainsi que les essais et critères de performances associés, applicables aux dispositifs différentiels résiduels (DDR) pour usages domestique et analogues, à des tensions assignées inférieures ou égales à 440 V.
Cette deuxième édition annule et remplace la première édition parue en 1995, l'Amendement 1:2004 et l'Amendement 2:2005. Cette édition constitue une révision technique.
Cette édition inclut les modifications majeures suivantes par rapport à l'édition précédente:
- des modifications rédactionnelles ont été introduites afin de se conformer aux Directives ISO/IEC Partie 2:2021, par exemple introduction de l'Article 3 – Termes et définitions, et renumérotation de l'ensemble du document. En particulier, la numérotation des critères de performance a été modifiée (5.1.1, 5.1.2 remplacés par A, B, etc.);
- améliorations techniques:
- modification du domaine d'application et ajout de l'Article 6 et de l'Article 7 afin de permettre l'utilisation du présent document comme ligne directrice pour la préparation des exigences et essais de CEM pour d'autres normes de produit qui relèvent du domaine d'application du SC 23E;
- ajout d'exigences applicables aux creux et aux coupures de tension;
- définition d'un taux de répétition de 5 kHz pour l'essai en salves;
- essai aux ondes de choc: spécification du point d'application de la tension de choc et ajout des tensions 2 kV, 1 kV et 0,5 kV à l'essai T 5b;
- champ électromagnétique rayonné aux fréquences radioélectriques: ajout de la plage de fréquences 1,4 GHz à 6 GHz et spécification des fréquences pour l'essai à 1,25 IΔn;
- perturbations conduites en mode commun dans la plage de fréquences de 0 Hz à 150 kHz: spécification des fréquences pour l'essai à 1,25 IΔn;
- décharges électrostatiques: modification des critères de performance de 5.1.3 à B.
Zaščitne naprave na residualni tok za uporabo v gospodinjstvu in podobne namene - Elektromagnetna združljivost
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61543:2021
01-oktober-2021
Zaščitne naprave na preostali (diferenčni) tok za uporabo v gospodinjstvu in
podobne namene - Elektromagnetna združljivost
Residual current-operated protective devices (RCDs) for household and similar use -
Electromagnetic compatibilityFehlerstromschutzeinrichtungen (RCDs) für Hausinstallationen und ähnliche
Verwendung - Elektromagnetische Verträglichkeit
Dispositifs différentiels résiduels (DDR) pour usages domestiques et analogues -
Compatibilité électromagnétique
Ta slovenski standard je istoveten z: prEN IEC 61543:2021
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
oSIST prEN IEC 61543:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN IEC 61543:2021
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61543:2021
23E/1235/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61543 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2021-08-06 2021-10-29
SUPERSEDES DOCUMENTS:
23E/1213/CD, 23E/1234/CC
IEC SC 23E : CIRCUIT-BREAKERS AND SIMILAR EQUIPMENT FOR HOUSEHOLD USE
SECRETARIAT: SECRETARY:
Italy Mr Giovanni Cassinelli
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel votingThe attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.TITLE:
Residual current-operated protective devices (RCDs) for household and similar use -
Electromagnetic compatibilityPROPOSED STABILITY DATE: 2024
NOTE FROM TC/SC OFFICERS:
Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.---------------------- Page: 3 ----------------------
oSIST prEN IEC 61543:2021
61543/Ed.2/CDV © IEC(E) 2 23E/1235/CDV
1 CONTENTS
3 FOREWORD......................................................................................................................... 3
4 INTRODUCTION ................................................................................................................... 5
5 1 Scope ............................................................................................................................ 6
6 2 Normative references .................................................................................................... 7
7 3 Terms and definitions .................................................................................................... 7
8 4 Electromagnetic emission of RCDs ............................................................................ 7
9 5 Electromagnetic immunity of RCDs ............................................................................. 8
10 5.1 General ................................................................................................................. 8
11 5.2 Performance criteria for RCDs .............................................................................. 8
12 5.3 Immunity tests ...................................................................................................... 8
13 6 Electromagnetic emission of products other than RCDs .......................................... 14
14 7 Electromagnetic immunity of products other than RCDs ........................................... 14
15 7.1 General ............................................................................................................... 14
16 7.2 Generic performance criteria ............................................................................... 14
17 Bibliography ....................................................................................................................... 15
19 Figure 1 – Example of an appropriate test circuit ................................................................. 13
21 Table 1 – Immunity tests ....................................................................................................... 9
22 Table 2 – Current level according to the frequency and RCD sensitivity for the
23 conditions of T 8 ................................................................................................................. 12
---------------------- Page: 4 ----------------------oSIST prEN IEC 61543:2021
61543/Ed.2/CDV © IEC(E) 3 23E/1235/CDV
26 INTERNATIONAL ELECTROTECHNICAL COMMISSION
27 ____________
29 RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDs) FOR
30 HOUSEHOLD AND SIMILAR USE -
31 ELECTROMAGNETIC COMPATIBILITY
34 FOREWORD
35 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
36 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
37 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
38 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
39 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
40 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
41 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
42 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
43 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
44 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
45 consensus of opinion on the relevant subjects since each technical committee has representation from all
46 interested IEC National Committees.47 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
48 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
49 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
50 misinterpretation by any end user.51 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
52 transparently to the maximum extent possible in their national and regional publications. Any divergence between
53 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
54 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
55 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
56 services carried out by independent certification bodies.57 6) All users should ensure that they have the latest edition of this publication.
58 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
59 members of its technical committees and IEC National Committees for any personal injury, property damage or
60 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
61 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
62 Publications.63 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
64 indispensable for the correct application of this publication.65 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
66 rights. IEC shall not be held responsible for identifying any or all such patent rights.
67 International Standard IEC 61543 has been prepared by subcommittee 23E: Circuit-breakers
68 and similar equipment for household use, of IEC technical committee 23: Electrical accessories
69 This second edition cancels and replaces the first edition published in 1995, Amendment 1:2004
70 and Amendment 2:2005. This edition constitutes a technical revision.71 This edition includes the following significant changes with respect to the previous edition:
72 a) some editorial modifications were introduced to comply to the ISO/IEC DIR 2 /
73 Ed.7.0, 2016, e.g. introduction of Clause 3 – Terms and Definitions and renumbering
74 of the whole document. In particular, the number of performance criteria has been
75 changed (5.1.1, 5.1.2 becomes A, B, etc…);76 b) some technical improvements
---------------------- Page: 5 ----------------------
oSIST prEN IEC 61543:2021
61543/Ed.2/CDV © IEC(E) 4 23E/1235/CDV
77 • Modification of scope and addition of clause 6 and clause 7 to enable the use of this
78 document as a guideline for the preparation of EMC requirements and tests for other
79 product standards under the scope of 23E.80 • Requirements for voltage dips and interruptions added
81 • Repetition rate for burst-test, defined at 5 kHz
82 • Surge test: Specifying of impulse voltage application point and adding of voltages
83 2,5 kV, 1 kV and 0,5kV to test T5b)84 • Radiated radio-frequency electromagnetic field: Adding of frequency range 1,4 - 6
85 GHz and specifying frequencies for the test at 1,25 I86 • Conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz:
87 Specifying frequencies for the test at 1,25 I
88 • Electrostatic discharges: Change of performance criteria from 5.1.3 to B
89 The text of this International Standard is based on the following documents:
FDIS Report on voting
23E/XX/FDIS 23E/XX/RVD
91 Full information on the voting for the approval of this International Standard can be found in the
92 report on voting indicated in the above table.93 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
94 The committee has decided that the contents of this document will remain unchanged until the
95 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
96 the specific document. At this date, the document will be97 • reconfirmed,
98 • withdrawn,
99 • replaced by a revised edition, or
100 • amended.
101
102
---------------------- Page: 6 ----------------------
oSIST prEN IEC 61543:2021
61543/Ed.2/CDV © IEC(E) 5 23E/1235/CDV
103 INTRODUCTION
104 IEC 61543 is product family standard for RCDs Electromagnetic Compatibility and, more
105 generally it is used as a guide for other devices of the SC23E.---------------------- Page: 7 ----------------------
oSIST prEN IEC 61543:2021
61543/Ed.2/CDV © IEC(E) 6 23E/1235/CDV
106 RESIDUAL CURRENT-OPERATED PROTECTIVE DEVICES (RCDS) FOR
107 HOUSEHOLD AND SIMILAR USE –
108
109 ELECTROMAGNETIC COMPATIBILITY
110
111 1 Scope
112 This document provides specific emission and immunity requirements, tests and performance
113 criteria for residual current-operated protective devices (RCDs), for household and similar use,
114 for rated voltages not exceeding 440 V.115 Household and similar use corresponds to the description given in the generic standard
116 IEC 61000-6-1 for residential, commercial, and light-industrial electromagnetic environments.
117 This document is intended to be referred to by RCD product standards and is not intended to
118 be used as a standalone document.119 Residual current-operated protective devices are:
120 – Residual current operated circuit-breakers without integral overcurrent protection for
121 household and similar use (RCCBs) covered by IEC 61008 series and IEC 62423;122 – Residual current operated circuit-breakers with integral overcurrent protection for household
123 and similar use (RCBOs) covered by IEC 61009 series and IEC 62423;124 – Residual current devices with or without overcurrent protection for socket-outlets (SRCDs)
125 covered by IEC 62640;126 – Portable residual current devices without integral overcurrent protection (PRCDs) covered
127 by IEC 61540;128 – Devices with an RCD functionality for household and similar use according product
129 standards following the group safety publications for general safety requirements for RCDs,
130 IEC 60755.131 This edition applies if it is referred to as a dated reference in the relevant product standard.
132 This document is also intended to be used as a guideline in the preparation of EMC
133 requirements and tests for other product standards under the scope of SC 23E. It also specifies
134 generic performance criteria intended to be transformed into specific performance criteria by
135 the relevant product standard.136 Note: Examples of other product standards under the scope of SC 23E are:
137 − IEC 62020-1 “Electrical accessories – Residual current monitors (RCMs) – Part 1: RCMs for household and
138 similar uses”;139 − IEC 62606 “General requirements for arc fault detection devices”;
140 − IEC 63024 “Requirements for automatic reclosing devices (ARDs) for circuit breakers, RCBOs-RCCBs for
141 household and similar uses”;142 − IEC 63052 “Power frequency overvoltage protective devices (POPs) for household and similar applications”;
143 − IEC 62752 “In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)”;
144 − IEC 62955 “Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric
145 vehicles”.---------------------- Page: 8 ----------------------
oSIST prEN IEC 61543:2021
61543/Ed.2/CDV © IEC(E) 7 23E/1235/CDV
146 2 Normative references
147 The following documents are referred to in the text in such a way that some or all of their content
148 constitutes requirements of this document. For dated references, only the edition cited applies.
149 For undated references, the latest edition of the referenced document (including any
150 amendments) applies.151 IEC 61000-4-2, Electromagnetic compatibility (EMC) – Part 4-2: Testing and
152 measurement techniques – Electrostatic discharge immunity test
153 IEC 61000-4-3, Electromagnetic compatibility (EMC) – Part 4-3: Testing and measurement
154 techniques – Radiated, radio-frequency, electromagnetic field immunity test155 IEC 6 1000-4-4, Electromagnetic compatibility (EMC) – Part 4-4: Testing and
156 measurement techniques – Electrical fast transient/burst immunity test
157 IEC 61000-4-5:2014/AMD1:2017, Electromagnetic compatibility (EMC) – Part 4-5: Testing and
158 measurement techniques – Surge immunity test159 IEC 61000-4-6, Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurement
160 techniques – Immunity to conducted disturbances, induced by radio frequency fields
161 IEC 61000-4-8, Electromagnetic compatibility (EMC) – Part 4-8: Testing and measurement
162 techniques – Power frequency magnetic field immunity test163 IEC 61000-4-11, Electromagnetic compatibility (EMC) – Part 4-11: Testing and measurement
164 techniques – Voltage dips, short interruptions and voltage variations immunity tests for
165 equipment with input current up to 16 A per phase166 IEC 61000-4-16:2015, Electromagnetic compatibility (EMC) – Part 4-16: Testing and
167 measurement techniques – Test for immunity to conducted, common mode disturbances in the
168 frequency range 0 Hz to 150 kHz169 IEC 61000-4-19, Electromagnetic compatibility (EMC) – Part 4-19: Testing and measurement
170 techniques – Test for immunity to conducted, differential mode disturbances and signalling in
171 the frequency range 2 kHz to 150 kHz at a.c. power ports172 CISPR 14-1, Electromagnetic compatibility – Requirements for household appliances, electric
173 tools and similar apparatus – Part 1: Emission174 3 Terms and definitions
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.