iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1760-1:2000

(Main)

Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors

Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors

This Standard specifies requirements for pressure sensitive mats and floors normally actuated by the feet for use as safety devices to protect persons from dangerous machinery. The minimum safety requirements for the performance, marking and documentation are given.  The Standard covers pressure sensitive mats and floors, regardless of type of energy used, e.g. electrical, hydraulic, pneumatic or mechanical.  This standard covers mats and floors designed to detect:   a) persons weighing more than 35 kg;   b) and persons (e.g. children) weighing more than 20 kg.  The detection of persons weighing less than 20 kg is not covered by this standard.  This European Standard does not specify the dimensions or the configuration of the effective sensing area of pressure sensitive mat(s) or floor(s) in relation to any particular application.

Sicherheit von Maschinen - Druckempfindliche Schutzeinrichtungen - Teil 1: Allgemeine Leitsätze für die Gestaltung und Prüfung von Schaltmatten und Schaltplatten

Diese Norm legt Anforderungen für Schaltmatten und Schaltplatten fest, die normalerweise mit den Füßen betätigt werden und als Schutzeinrichtungen zum Schutz von Personen vor Gefahren, die von Maschinen ausgehen, Verwendung finden.Die Mindestsicherheitsanforderungen für die Wirkung, Kennzeichnung und Dokumentation sind gegeben. Diese Norm befaßt sich mit Schaltmatten und Schaltplatten, unabhängig der angewendeten Energie, z.B. elektrisch, hydraulisch, pneumatisch oder mechanisch.

Sécurité des machines - Dispositifs de protection sensibles a la pression - Partie 1: Principes généraux de conception et d'essai des tapis et planchers sensibles a la pression

La présente norme spécifie des prescriptions relatives a des tapis et des planchers sensibles normalement actionnés par les pieds destinés a etre usités comme dispositifs de protection des personnes en machinerie. Les prescriptions de sécurité minimales pour les performances, le marquage et la documentation sont données. La norme couvre tapis et planchers sensibles a la pression quel que soit le type d'énergie mise en oeuvre par exemple électrique, hydraulique, pneumatique ou mécanique.

Varnost strojev - Varovalne naprave, občutljive na tlak - 1. del: Splošna načela za načrtovanje in preskušanje preprog in podov, občutljivih na tlak

General Information

Status
Withdrawn
Publication Date
31-May-2000
Withdrawal Date
02-Apr-2009
ICS
29.120.50 - Fuses and other overcurrent protection devices
Technical Committee
VSN - Safety of machinery
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
03-Apr-2009
Due Date
26-Apr-2009
Completion Date
03-Apr-2009
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
EN 1760-1:1997 - Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors

Relations

Consolidated By
SIST EN 1760-1:2000+A1:2009 - Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
Effective Date
18-Jan-2023
Consolidated By
SIST EN 1760-1:2000+A1:2009 - Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
Effective Date
19-Jan-2023
Replaced By
SIST EN 1760-1:2000+A1:2009 - Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
Effective Date
01-May-2009

Buy Standard

EN 1760-1:2000EN 1760-1:2000
PreviousNext
Standard
EN 1760-1:2000
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1760-1:2000
01-junij-2000
9DUQRVWVWURMHY9DURYDOQHQDSUDYHREþXWOMLYHQDWODNGHO6SORãQDQDþHOD]D
QDþUWRYDQMHLQSUHVNXãDQMHSUHSURJLQSRGRYREþXWOMLYLKQDWODN
Safety of machinery - Pressure sensitive protective devices - Part 1: General principles
for the design and testing of pressure sensitive mats and pressure sensitive floors
Sicherheit von Maschinen - Druckempfindliche Schutzeinrichtungen - Teil 1: Allgemeine
Leitsätze für die Gestaltung und Prüfung von Schaltmatten und Schaltplatten
Sécurité des machines - Dispositifs de protection sensibles a la pression - Partie 1:
Principes généraux de conception et d'essai des tapis et planchers sensibles a la
pression
Ta slovenski standard je istoveten z: EN 1760-1:1997
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
SIST EN 1760-1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 2 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 3 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 4 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 5 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 6 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 7 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 8 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 9 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 10 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 11 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 12 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 13 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 14 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 15 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 16 ----------------------

SIST EN 1760-1:2000

---------------------- Page: 17 ----------------------

SIST EN 1760-1:2000

---------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 62423:2013/A12:2023(Amendment)
Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
EN 62423:2012/A12:2022

The scope of EN 61008-1 and EN 61008-2-1 or EN 61009-1 and EN 61009-2-1 applies with the following additions.
This standard specifies requirements and tests for Type F and Type B RCDs (Residual current devices). Requirements and tests given in this standard are in addition to the requirements of Type A residual current devices according to EN 61008-2-1 or EN 61009-2-1. This standard can only be used together with EN 61008-1 and EN 61009-1.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60269-2:2013/A1:2023(Amendment)
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K (IEC 60269-2:2013/A1:2016)
HD 60269-2:2013/A1:2022

IEC 60269-2:2013 provides supplementary requirements for fuses for use by authorized persons and are generally designed to be used in installations where the fuse-links are accessible to, and may be replaced by, authorized persons only. Fuses for use by authorized persons according to the following fuse systems also comply with the requirements of the corresponding subclauses of IEC 60269-1, unless otherwise defined in this standard. This standard is divided into fuse systems, each dealing with a specific example of standardized fuses for use by authorized persons:  - Fuse system A: Fuses with fuse-links with blade contacts (NH fuse system),  - Fuse system B: Fuses with striker fuse-links with blade contacts (NH fuse system),  - Fuse system C: Fuse-rails (NH fuse system),  - Fuse system D: Fuse-bases for busbar mounting (NH fuse system),  - Fuse system E: Fuses with fuse-links for bolted connections (BS bolted fuse system),  - Fuse system F: Fuses with fuse-links having cylindrical contact caps (NF cylindrical fuse system),  - Fuse system G: Fuses with fuse-links with offset blade contacts (BS clip-in fuse system),  - Fuse system H: Fuses with fuse-links having 'gD' and 'gN' characteristic (class J and class time delay and non time delay fuse types),  - Fuse system I: gU fuse-links with wedge tightening contacts,  - Fuse system J: Fuses with fuse-links having 'gD class CC' and 'gN class CC' characteristics (class CC time delay and non-time delay fuse types),  - Fuse system K: gK fuse-links with blade for bolted connections - High fuse-link ratings from 1 250 A up to 4 800 A (master fuse-links). This fifth edition of IEC 60269-2 cancels and replaces the fourth edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  1. fuse systems A and B: modified values for the power dissipation of NH aM fuse-links;  2. fuse systems A and B: introduction of dimension r for NH fuse-links;  3. addition of new fuse system K: gK fuse-links with contacts for bolted connections.   Key Words: fuse systems A to K,  requirements for fuses

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP IEC TR 60269-5:2022/AMD1:2023(Main)
Amendment 1 - Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses
IEC TR 60269-5:2014/AMD1:2020
  • Technical report
    16 pages
    English language
    sale 15% off
  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60269-3:2010/A2:2023(Amendment)
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F (IEC 60269-3:2010/A2:2019)
HD 60269-3:2010/A2:2022

2018-05-14 PC: TC to finalize the finalize Annex ZA, ZZ and Risk assessment

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-2:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by DC traction systems
EN 50122-2:2022

1 - General
- adaptation of the Scope of this standard (include electrical safety related interface with vehicles, extension for electrified road transport – as shown above)
- Incorporate such small technical improvements from IEC 62128, made when transferring from previous version 50122-1, only insofar as these are essential for the coherence of the standard 50122-1
- Harmonize definitions with other railway standards (esp. EN 50119)
- check and redefine some definitions, harmonize with IEC 60050:
   o Check and harmonize terms and definitions specific to railway terminology with IEC 60050 chapters 811 and 821. If modification of a definition is essential, consider harmonization with a recent definition used in a railway specific standard and which should postdate the IEC entry.
   o Check and harmonize terms and definitions specific to electric shock with IEC60050 chapter 195 except where the terms and definitions in IEC 61140:2016 are appropriate and postdate IEC 60050 entry.
   o Check and harmonise other terms and definitions with IEC 50050 where appropriate.
- Review and ensure the document accurately and consistently uses the correct ‘verbal forms for expressions of provisions’ (according to the Internal Regulations, Part 3, clause 7), the wording used is clear and achieves good differentiation between normative and informative content.
- Review and ensure the document’s content relating to the prevention of electric shock is harmonized with basic safety publication IEC/EN 61140. In particular, the IEC/EN61140 content on fundamental rules, terminology, protective provisions (i.e. basic protection, fault protection, enhanced protective provisions).
- Review and revise clause 1 to ensure that the document’s scope is clear and accurately stated, it is harmonised with the title and only aspects falling within this scope are included within the document’s normative content. This take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards and in particular the scope of prEN 50488.
2 – Specific
- Review and modify clause 5 and harmonize its content with the relevant aspects of IEC61140, EN50124 series, prEN50488. Particular consideration to be given to the dimensioning of air clearance associated with protective provisions. This will take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards.
- Review and revise clause 6, in particular the content on protective provisions to improve its alignment with basic safety publication IEC/EN 61140 content for this aspect.
- revision of Chapter 7
- Review and revise clause 10.5 to ensure that the content is fit for purpose and is coordinated with EN 50124, EN 50119 and EN5 0488 in particular, such that these standards will provide a coherent approach. This will take note of the on-going SC9XC work on coordination between these standards.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-3:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of AC and DC traction systems
EN 50122-3:2022

1 - General
- adaptation of the Scope of this standard (include electrical safety related interface with vehicles, extension for electrified road transport – as shown above)
- Incorporate such small technical improvements from IEC 62128, made when transferring from previous version 50122-1, only insofar as these are essential for the coherence of the standard 50122-1
- Harmonize definitions with other railway standards (esp. EN 50119)
- check and redefine some definitions, harmonize with IEC 60050:
   o Check and harmonize terms and definitions specific to railway terminology with IEC 60050 chapters 811 and 821. If modification of a definition is essential, consider harmonization with a recent definition used in a railway specific standard and which should postdate the IEC entry.
   o Check and harmonize terms and definitions specific to electric shock with IEC60050 chapter 195 except where the terms and definitions in IEC 61140:2016 are appropriate and postdate IEC 60050 entry.
   o Check and harmonise other terms and definitions with IEC 50050 where appropriate.
- Review and ensure the document accurately and consistently uses the correct ‘verbal forms for expressions of provisions’ (according to the Internal Regulations, Part 3, clause 7), the wording used is clear and achieves good differentiation between normative and informative content.
- Review and ensure the document’s content relating to the prevention of electric shock is harmonized with basic safety publication IEC/EN 61140. In particular, the IEC/EN61140 content on fundamental rules, terminology, protective provisions (i.e. basic protection, fault protection, enhanced protective provisions).
- Review and revise clause 1 to ensure that the document’s scope is clear and accurately stated, it is harmonised with the title and only aspects falling within this scope are included within the document’s normative content. This take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards and in particular the scope of prEN 50488.
2 – Specific
- Review and modify clause 5 and harmonize its content with the relevant aspects of IEC61140, EN50124 series, prEN50488. Particular consideration to be given to the dimensioning of air clearance associated with protective provisions. This will take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards.
- Review and revise clause 6, in particular the content on protective provisions to improve its alignment with basic safety publication IEC/EN 61140 content for this aspect.
- revision of Chapter 7
- Review and revise clause 10.5 to ensure that the content is fit for purpose and is coordinated with EN 50124, EN 50119 and EN5 0488 in particular, such that these standards will provide a coherent approach. This will take note of the on-going SC9XC work on coordination between these standards.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-5-53:2022/AC:2022(Corrigendum)
Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear
HD 60364-5-53:2022/AC:2022-08

CCMC - Correction of ToC, clause numbering
TC - Correction of Figure 534.1

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61643-31:2019/AC:2022(Corrigendum)
Low-voltage surge protective devices - Part 31: Requirements and test methods for SPDs for photovoltaic installations
EN 61643-31:2019/AC:2022-07

IEC Corrected version

  • Corrigendum
    4 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-5-53:2022(Main)
Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear
HD 60364-5-53:2022

This part of HD 60364 deals with general requirements for isolation, switching, control and monitoring and with
the requirements for selection and erection of the devices provided to fulfil such functions.

  • Standardization document
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50522:2022(Main)
Earthing of power installations exceeding 1 kV a.c.
EN 50522:2022

This document is applicable to specify the requirements for the design and erection of earthing systems of
electrical installations, in systems with nominal voltage above 1 kV AC and nominal frequency up to and
including 60 Hz, so as to provide safety and proper functioning for the use intended.
NOTE 1 The technical and procedural principles of this document can be applied when third parties’ installations and
facilities are planned and/or erected in the vicinity of HV electrical power installations.
For the purpose of interpreting this document, an electrical power installation is considered to be one of the
following:
a) substation, including substation for railway power supply;
b) electrical power installations on mast, pole and tower;
switchgear and/or transformers located outside a closed electrical operating area;
c) one (or more) power station(s) located on a single site;
the electrical power installation includes generators and transformers with all associated switchgear and all
electrical auxiliary systems. Connections between generating stations located on different sites are
excluded;
d) the electrical system of a factory, industrial plant or other industrial, agricultural, commercial or public
premises;
e) electrical power installations on offshore facilities for the purpose of generation, transmission, distribution
and/or storage of electricity;
f) transition towers/poles between overhead lines and underground lines.
The electrical power installation includes, among others, the following equipment:
— rotating electrical machines;
— switchgear;
— transformers and reactors;
— converters;
— cables;
— wiring systems;
— batteries;
— capacitors;
— earthing systems;
— buildings and fences which are part of a closed electrical operating area;
— associated protection, control and auxiliary systems;
— large air core reactor.
NOTE 2 In general, a standard for an item of equipment takes precedence over this document
This document does not apply to the design and erection of earthing systems of any of the following:
— overhead and underground lines between separate installations;
— electrified railway tracks and rolling stock;
— mining equipment and installations;
— fluorescent lamp installations;
— installations on ships according to IEC 60092 (all parts) and offshore units according to
IEC 61892 (all parts), which are used in the offshore petroleum industry for drilling, processing and storage
purposes;
— electrostatic equipment (e.g. electrostatic precipitators, spray-painting units);
— test sites;
— medical equipment, e.g. medical X-ray equipment.
NOTE 3 The standard EN 50341 series, Overhead lines exceeding AC 1 kV, specifies requirements for the design and
erection of earthing systems in overhead lines.
NOTE 4 The scope of this document does not include the requirements for carrying out live working on electrical power
installations.
NOTE 5 The scope of this document considers safety requirements for HV installations and its influences on LV
installations. For electrical installation up to 1 kV, the standard HD 60364 series applies.

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day