SIST EN ISO 1043-2:2012
(Main)Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
This part of ISO 1043 specifies uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use, and its main aim is both to prevent the occurrence of more than one symbol for a given filler or reinforcing material and to prevent a given symbol being interpreted in more than one way.
Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 2: Füllstoffe und Verstärkungsstoffe (ISO 1043-2:2011)
Dieser Teil von ISO 1043 stellt einheitliche Kurzzeichen für Füll- und Verstärkungsstoffe zur Verfügung. Er
enthält nur diejenigen Kurzzeichen, die generell eingeführt sind, und er bezweckt, sowohl das Auftreten von
mehr als einem Kurzzeichen für einen bestimmten Füll- oder Verstärkungsstoff, als auch die Deutung eines
gegebenen Kurzzeichens in mehr als einer Weise zu verhindern.
ANMERKUNG Für Kennbuchstaben und Kurzzeichen für Basis-Polymere und ihre besonderen Eigenschaften siehe
ISO 1043-1, für Weichmacher siehe ISO 1043-3 und für Flammschutzmittel siehe ISO 1043-4.
Plastiques - Symboles et termes abrégés - Partie 2: Charges et matériaux de renforcement (ISO 1043-2:2011)
L'ISO 1043-2:2011 spécifie des symboles uniformes pour les termes relatifs aux charges et aux matériaux de renforcement. Elle inclut uniquement les symboles dont l'usage est établi et son objectif est double: prévenir l'apparition de plusieurs symboles pour une charge ou un matériau de renforcement donné, et empêcher qu'un symbole donné puisse être interprété de plusieurs façons différentes.
Polimerni materiali - Simboli in kratice - 2. del: Polnila in materiali za ojačenje (ISO 1043-2:2011)
Ta del standarda ISO 1043 določa enotne simbole za kratice, ki se nanašajo na polnila in materiale za ojačanje. Zajema le tiste simbole, ki se splošno uporabljajo, pri čemer je glavni cilj standarda preprečiti pojav več kot enega simbola za posamezno polnilo ali material za ojačanje in pojav več pomenov za posamezno kratico.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 2: Füllstoffe und Verstärkungsstoffe (ISO 1043-2:2011)Plastiques - Symboles et termes abrégés - Partie 2: Charges et matériaux de renforcement (ISO 1043-2:2011)Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)83.040.30Pomožni materiali in aditivi za polimerne materialeAuxiliary materials and additives for plastics01.075Simboli za znakeCharacter symbolsICS:Ta slovenski standard je istoveten z:EN ISO 1043-2:2011SIST EN ISO 1043-2:2012en,fr01-februar-2012SIST EN ISO 1043-2:2012SLOVENSKI
STANDARDSIST EN ISO 1043-2:20021DGRPHãþD
SIST EN ISO 1043-2:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 1043-2
November 2011 ICS 83.040.30; 83.080.01 Supersedes EN ISO 1043-2:2001English Version
Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
Plastiques - Symboles et termes abrégés - Partie 2: Charges et matériaux de renforcement (ISO 1043-2:2011) Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 2: Füllstoffe und Verstärkungsstoffe (ISO 1043-2:2011) This European Standard was approved by CEN on 12 November 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1043-2:2011: ESIST EN ISO 1043-2:2012
EN ISO 1043-2:2011 (E) 2 Contents Page Foreword .3 SIST EN ISO 1043-2:2012
EN ISO 1043-2:2011 (E) 3 Foreword This document (EN ISO 1043-2:2011) has been prepared by Technical Committee ISO/TC 61 "Plastics" in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the latest by May 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 1043-2:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1043-2:2011 has been approved by CEN as a EN ISO 1043-2:2011 without any modification.
SIST EN ISO 1043-2:2012
SIST EN ISO 1043-2:2012
Reference numberISO 1043-2:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO1043-2Third edition2011-11-15Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials Plastiques — Symboles et termes abrégés — Partie 2: Charges et matériaux de renforcement
SIST EN ISO 1043-2:2012
ISO 1043-2:2011(E) ©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2011 – All rights reserved
SIST EN ISO 1043-2:2012
ISO 1043-2:2011(E) © ISO 2011 – All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that c
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.