iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 60947-4-1:2019/AC:2021

(Corrigendum)

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2018/COR2:2021)

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2018/COR2:2021)

2021-04-30 - IEC Corrected version

Niederspannungsschaltgeräte - Teil 4-1: Schütze und Motorstarter - Elektromechanische Schütze und Motorstarter (IEC 60947-4-1:2018/COR2:2021)

Appareillage à basse tension - Partie 4-1: Contacteurs et démarreurs de moteurs - Contacteurs et démarreurs électromécaniques (IEC 60947-4-1:2018/COR2:2021)

Nizkonapetostne stikalne in krmilne naprave - 4-1. del: Kontaktorji in motorski zaganjalniki - Elektromehanski kontaktorji in motorski zaganjalniki - Popravek AC (IEC 60947-4-1:2018/COR2:2021)

General Information

Status
Published
Publication Date
13-May-2021
ICS
29.120.99 - Other electrical accessories
29.130.20 - Low voltage switchgear and controlgear
Technical Committee
SKA - Switchgear and control gear
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-May-2021
Due Date
12-Jul-2021
Completion Date
14-May-2021
Ref Project
EN IEC 60947-4-1:2019/AC:2021-04 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

Relations

Corrects
SIST EN IEC 60947-4-1:2019 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2018)
Effective Date
06-May-2021
Revised
oSIST prEN IEC 60947-4-1:2022 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
Effective Date
08-Mar-2022

Buy Standard

EN IEC 60947-4-1:2019/AC:2021EN IEC 60947-4-1:2019/AC:2021
PreviousNext
Corrigendum
EN IEC 60947-4-1:2019/AC:2021
English and French language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60947-4-1:2019/AC:2021
01-julij-2021
Nizkonapetostne stikalne in krmilne naprave - 4-1. del: Kontaktorji in motorski
zaganjalniki - Elektromehanski kontaktorji in motorski zaganjalniki - Popravek AC
(IEC 60947-4-1:2018/COR2:2021)
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters -
Electromechanical contactors and motor-starters (IEC 60947-4-1:2018/COR2:2021)
Niederspannungsschaltgeräte - Teil 4-1: Schütze und Motorstarter - Elektromechanische
Schütze und Motorstarter (IEC 60947-4-1:2018/COR2:2021)
Appareillage à basse tension - Partie 4-1: Contacteurs et démarreurs de moteurs -
Contacteurs et démarreurs électromécaniques (IEC 60947-4-1:2018/COR2:2021)
Ta slovenski standard je istoveten z: EN IEC 60947-4-1:2019/AC:2021-04
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN IEC 60947-4-1:2019/AC:2021 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60947-4-1:2019/AC:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 60947-4-1:2019/AC:2021


EUROPEAN STANDARD EN IEC 60947-4-1:2019
/AC:2021-04
NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2021

ICS 29.120.99; 29.130.20

English Version
Low-voltage switchgear and controlgear - Part 4-1: Contactors
and motor-starters - Electromechanical contactors and motor-
starters
(IEC 60947-4-1:2018/COR2:2021)
Appareillage à basse tension - Partie 4-1: Contacteurs et Niederspannungsschaltgeräte - Teil 4-1: Schütze und
démarreurs de moteurs - Contacteurs et démarreurs Motorstarter - Elektromechanische Schütze und
électromécaniques Motorstarter
(IEC 60947-4-1:2018/COR2:2021) (IEC 60947-4-1:2018/COR2:2021)
This corrigendum becomes effective on 30 April
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60947-5-5:1999/A2:2017(Amendment)
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function EN (60947-5-5:1997/A2:2017)
EN 60947-5-5:1997/A2:2017

2017-05-02: D156/C084 - Ratified standards not being made available.
DOP = DAV + 6 months
DOW = DAV + 36 months
Annex ZZ for MD 2006/42/EC available in EN 60947-5-5:1997/A11.

  • Amendment
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60947-5-5:1999/A11:2013(Amendment)
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
EN 60947-5-5:1997/A11:2013

This section of  IEC 60947-5 provides detailed specifications relating to the electrical and mechanical construction of emergency stop devices with mechanical latching function and to their testing. This standard is applicable to electrical control circuit devices and switching elements which are used to provide an emergency stop signal. Such devices may be either provided with their own enclosure, or installed according to the manufacturer,s instructions.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60947-7-1:2009(Main)
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors (IEC 60947-7-1:2009)
EN 60947-7-1:2009

This part of IEC 60947 specifies requirements for terminal blocks with screw-type or screwless- type clamping units primarily intended for industrial or similar use and to be fixed to a support to provide electrical and mechanical connection between copper conductors. lt applies to terminal blocks intended to connect round copper conductors, with or without special preparation, having a cross-section between 0,2 mm2 and 300 mm2 (AWG 24/600 kcmil), intended to be used in circuits of a rated voltage not exceeding 1000 V a.c. up to 1000 Hz or 1 500 V d.c.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60947-7-2:2009(Main)
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors (IEC 60947-7-2:2009)
EN 60947-7-2:2009

This part of IEC 60947 specifies requirements for protective conductor terminal blocks with PE function up to 120 mm2 (250 kcmil) and for protective conductor terminal blocks with PEN function equal to and above 10 mm2 (AWG 8) with screw-type or screwless-type clamping units, primarily intended for industrial applications.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60947-5-5:1999/A1:2005(Amendment)
Low-voltage switchgear and controlgear -- Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
EN 60947-5-5:1997/A1:2005

This section of  IEC 60947-5 provides detailed specifications relating to the electrical and mechanical construction of emergency stop devices with mechanical latching function and to their testing. This standard is applicable to electrical control circuit devices and switching elements which are used to provide an emergency stop signal. Such devices may be either provided with their own enclosure, or installed according to the manufacturer,s instructions.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60947-5-5:1999(Main)
Low-voltage switchgear and controlgear -- Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
EN 60947-5-5:1997

This section of  IEC 60947-5 provides detailed specifications relating to the electrical and mechanical construction of emergency stop devices with mechanical latching function and to their testing. This standard is applicable to electrical control circuit devices and switching elements which are used to provide an emergency stop signal. Such devices may be either provided with their own enclosure, or installed according to the manufacturer,s instructions.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN IEC 60947-4-1:2022(Main)
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
prEN IEC 60947-4-1:2022
  • Draft
    179 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN IEC 61095:2023(Main)
Electromechanical contactors for household and similar purposes
FprEN IEC 61095:2023
  • Draft
    141 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60947-5-5:1999/A2:2017(Amendment)
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function EN (60947-5-5:1997/A2:2017)
EN 60947-5-5:1997/A2:2017

2017-05-02: D156/C084 - Ratified standards not being made available.
DOP = DAV + 6 months
DOW = DAV + 36 months
Annex ZZ for MD 2006/42/EC available in EN 60947-5-5:1997/A11.

  • Amendment
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60947-5-5:1999/A11:2013(Amendment)
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
EN 60947-5-5:1997/A11:2013

This section of  IEC 60947-5 provides detailed specifications relating to the electrical and mechanical construction of emergency stop devices with mechanical latching function and to their testing. This standard is applicable to electrical control circuit devices and switching elements which are used to provide an emergency stop signal. Such devices may be either provided with their own enclosure, or installed according to the manufacturer,s instructions.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day