This document specifies the conformance test plans for the CXPI data link layer and the CXPI physical layer. It also specifies the conformance test plan for error detection. Additionally, this document describes the concept of conformance test plan operation.

    • sale 15% off
    • Standard
      132 pages
      English language
    • sale 15% off
    • Draft
      132 pages
      English language

This document specifies the conformance test plan for ISO 20794-2:2020 implementations. It specifies conformance test cases related to: — concept of operation; — network management; — transfer management; and — error management.

    • sale 15% off
    • Standard
      51 pages
      English language
    • sale 15% off
    • Draft
      51 pages
      English language

This document defines the terms which are used in the ISO 21111 series and provides an overview of the standards for in-vehicle Ethernet including the complementary relations to ISO/IEC/IEEE 8802‑3:2017[7] and its amendments, the document structure in accordance with OSI reference model specified in ISO/IEC 7498‑1[1] and ISO/IEC 10731:1994,[2] type of physical entities, in-vehicle Ethernet specific functionalities, and so on.

    • sale 15% off
    • Standard
      8 pages
      English language
    • sale 15% off
    • Draft
      8 pages
      English language

This document specifies the following items to complement ISO/IEC /IEEE 8802‑3: — interface between reconciliation sublayer and physical entity including reduced gigabit media independent interface (RGMII); — common physical entity wake-up and synchronised link sleep functionalities independent from physical media and transmission bit rate. The optical and electrical component requirements and test methods for optical and electrical transmission of in-vehicle Ethernet are not in the scope of thi...view more

    • sale 15% off
    • Standard
      28 pages
      English language
    • sale 15% off
    • Draft
      28 pages
      English language

This document specifies the conformance test plan for the 150-Mbit/s optical physical layer for MOST (MOST150 oPHY), a synchronous time-division-multiplexing network. This document specifies the basic conformance test measurement methods, relevant for verifying compatibility of networks, nodes, and MOST components with the requirements specified in ISO 21806-8[eXtyles1] . [eXtyles1]ISO 21806-8: current stage is 50.00

    • sale 15% off
    • Standard
      68 pages
      English language
    • sale 15% off
    • Draft
      68 pages
      English language

This document specifies the 150-Mbit/s optical physical layer for MOST (MOST150 oPHY), a synchronous time-division-multiplexing network. This document specifies the applicable constraints and defines interfaces and parameters, suitable for the development of products based on MOST150 oPHY. Such products include fibre optical links and connectors, fibre optic receivers, fibre optic transmitters, electrical to optical converters, and optical to electrical converters. This document also establishes...view more

    • sale 15% off
    • Standard
      47 pages
      English language
    • sale 15% off
    • Draft
      46 pages
      English language

This document specifies the conformance test plan (CTP) for the application layer for MOST, a synchronous time-division-multiplexing network, as specified in ISO 21806-2. This document specifies conformance test cases (CTCs) in the following categories: — device model; — data and basic data types; — registry management; — connection management; — error management; — diagnosis. Interoperability testing is not in the scope of this document.

    • sale 15% off
    • Standard
      96 pages
      English language
    • sale 15% off
    • Draft
      96 pages
      English language

This document specifies the transport and network layer conformance test plan, which tests the transportation of diagnostic communication, node configuration data and network layer services using the service interface parameters reported by the lower OSI layers and submitted to the higher OSI layers. The transport layer and network layer conformance test plan contain the following descriptions: — concept of operation conformance test plan; — transport layer protocol conformance test plan; — netw...view more

    • sale 15% off
    • Standard
      30 pages
      English language

This document specifies the conformance test plan (CTP) for the data link layer for MOST, a synchronous time-division-multiplexing network, as specified in ISO 21806-6. This document specifies conformance test cases (CTCs) in the following categories: — network frames; — allocation channel; — protected system channel; — timestamp channel; — flow control; — cyclic redundancy check; — arbitration; — default packet channel. Interoperability testing is not in the scope of this document.

    • sale 15% off
    • Standard
      23 pages
      English language

This document specifies technical requirements related to the MOST transport layer and network layer functionality: — the service interface to application layer; — the network layer services; — the data transport mechanism; — the dynamic behaviour of a node; — the network error management.

    • sale 15% off
    • Standard
      56 pages
      English language

This document provides general information and definitions for Media Oriented Systems Transport (MOST), a synchronous time-division-multiplexing network. This document describes the access to MOST specifications, which are referenced by the ISO 21806 series.

    • sale 15% off
    • Standard
      23 pages
      English language

This document specifies the conformance test plan (CTP) for the transport layer and network layer for MOST, a synchronous time-division-multiplexing network, as specified in ISO 21806-4. This document specifies conformance test cases (CTCs) in the following categories: — network layer services; — data transport mechanism; — dynamic behaviour of a node. Interoperability testing is not in the scope of this document.

    • sale 15% off
    • Standard
      31 pages
      English language

This document specifies a part of the application, the application layer, and the presentation layer. The application covers the — device model, — registry management, — connection management for streaming data, — diagnosis, and — error handling. The application layer covers the structure of MOST messages consisting of — addressing, — function block identifiers, — instance identifiers, — function identifiers, — operation types, and — timing definitions. The presentation layer covers the definiti...view more

    • sale 15% off
    • Standard
      136 pages
      English language

This document specifies technical requirements related to the MOST data link layer functionality. A MOST network is comprised of two or more nodes connected through a physical layer. The data link layer functionality is provided by each node. On each network, all nodes are synchronised and one node provides the system clock. This node is the TimingMaster, while all other nodes are TimingSlaves. The timing configuration of the node (TimingMaster or TimingSlave) determines the tasks that need to b...view more

    • sale 15% off
    • Standard
      68 pages
      English language

This document specifies: — requirements on the physical layer at system level, — requirements on the interoperability test set-ups, — interoperability test plan that checks the requirements for the physical layer at system level, — requirements on the device-level physical layer conformance test set-ups, and — device-level physical layer conformance test plan that checks a set of requirements for the OSI physical layer that are relevant for device vendors. The interoperability test plan checks t...view more

    • sale 15% off
    • Standard
      73 pages
      English language
    • sale 15% off
    • Draft
      73 pages
      English language

This document provides supplemental specifications to a physical layer capable of transmitting 1 Gbit/s over plastic optical fibre compliant with ISO/IEC/IEEE 8802-3:2017/Amd 9:2018, with specific application to communications inside road vehicles. Additionally, there is a test plan specified for conformance testing. The test plan includes test cases to assure compliance of an IUT with the functionality specified in this document. ISO/IEC/IEEE 8802-3:2017/Amd 9:2018 is considered indispensable f...view more

    • sale 15% off
    • Standard
      186 pages
      English language
    • sale 15% off
    • Draft
      186 pages
      English language

This document specifies the OSI transport layer and network layer by means of services and protocols. They can be used by different applications. The transport layer: — transforms a message into a single packet; — adds protocol control information for diagnostic and node configuration into each packet; — adds packet identifier for diagnostic and node configuration into each packet; and — performs transport protocol error detection. The transport layer protocol is not used for normal communicatio...view more

    • sale 15% off
    • Standard
      23 pages
      English language

This document specifies the CXPI data link layer and the CXPI physical layer. The DLL is based on: — priority-based CXPI network access; — non-destructive content-based arbitration; — broadcast frame transfer and acceptance filtering; and — node related error detection and error signalling. The CXPI physical layer (PHY) requirements comprise of: — physical signalling (PS) sub-layer, which specifies the requirements of the clock generation function, the encoding and decoding of CXPI frames, and b...view more

    • sale 15% off
    • Standard
      56 pages
      English language

This document describes the application layer protocol including the application measurement and control data management, message transfer and fault management. The application and application layer contain the following descriptions: — message structure; — communication method; — network management (optional); — measurement and control data; and — error handling. This document also specifies: — the service interface; and — the service interface parameters.

    • sale 15% off
    • Standard
      37 pages
      English language

This document specifies an additional electrical physical layer (EPL) for the Local Interconnect Network (LIN) of the ISO 17987 series. It specifies the transmission over DC powerline without affecting the LIN higher layers, hereafter named DC-LIN. The DC-LIN EPL uses a high-frequency modulated carrier to propagate UART bytes (byte-oriented) over the DC powerline. This document specifies the electrical characteristics, the modulation method of the transmission, and how to impose the carrier sign...view more

    • sale 15% off
    • Standard
      56 pages
      English language

This document specifies the conformance test plan for the CAN physical layer as standardized in ISO 11898‑2:2016. It specifies static and dynamic tests. The dynamic tests includes the test cases for the partly implemented Classical CAN protocol and CAN FD protocol as standardized in ISO 11898‑1:2015. The static tests describe the data to be given in datasheets.

    • sale 15% off
    • Standard
      87 pages
      English language

ISO 11898-2:2016 specifies the high-speed physical media attachment (HS-PMA) of the controller area network (CAN), a serial communication protocol that supports distributed real-time control and multiplexing for use within road vehicles. This includes HS-PMAs without and with low-power mode capability as well as with selective wake-up functionality. The physical media dependant sublayer is not in the scope of this document.

    • sale 15% off
    • Standard
      30 pages
      English language
    • sale 15% off
    • Standard
      30 pages
      English language

ISO 17987-7:2016 specifies the conformance test for the electrical physical layer (EPL) of the LIN communications system. It is part of this document to define a test that considers ISO 9646 and ISO 17987‑4. The purpose of ISO 17987-7:2016 is to provide a standardized way to verify whether a LIN bus driver is compliant to ISO 17987?4. The primary motivation is to ensure a level of interoperability of LIN bus drivers from different sources in a system environment. ISO 17987-7:2016 provides all th...view more

    • sale 15% off
    • Standard
      172 pages
      English language
    • sale 15% off
    • Standard
      172 pages
      English language

ISO/TR 17987-5:2016 has been established in order to define the LIN application programmers interface (API).

    • sale 15% off
    • Technical report
      34 pages
      English language

ISO 16845-1:2016 specifies the conformance test plan for the CAN data link layer and the physical signalling as standardized in ISO 11898‑1. This includes the Classical CAN protocols as well as the CAN FD protocols.

    • sale 15% off
    • Standard
      126 pages
      English language

ISO 17987-6:2016 specifies the LIN protocol conformance test. This test verifies the conformance of LIN communication controllers with respect to ISO 17987‑2 and ISO 17987‑3. ISO 17987-6:2016 provides all necessary technical information to ensure that test results are identical even on different test systems, provided that the particular test suite and the test system are compliant to the content of this document.

    • sale 15% off
    • Standard
      66 pages
      English language
    • sale 15% off
    • Standard
      66 pages
      English language

ISO 17987-4:2016 specifies the 12 V and 24 V electrical physical layers (EPL) of the LIN communications system. The electrical physical layer for LIN is designed for low-cost networks with bit rates up to 20 kbit/s to connect automotive electronic control units (ECUs). The medium that is used is a single wire for each receiver and transmitter with reference to ground. ISO 17987-4:2016 includes the definition of electrical characteristics of the transmission itself and also the documentation of b...view more

    • sale 15% off
    • Standard
      27 pages
      English language
    • sale 15% off
    • Standard
      27 pages
      English language

ISO 17987-3:2016 specifies the LIN protocol including the signal management, frame transfer, schedule table handling, task behaviour and status management and LIN master and slave node. It contains also OSI layer 5 properties according to ISO 14229‑7 UDSonLIN-based node configuration and identification services (SID: B016 to B816) belonging to the core protocol specification. A node (normally a master node) that is connected to more than one LIN network is handled by higher layers (i.e. the appl...view more

    • sale 15% off
    • Standard
      44 pages
      English language
    • sale 15% off
    • Standard
      44 pages
      English language

ISO 17987-1:2016 gives an overview of the structure and the partitioning of ISO 17987 (all parts). In addition, it outlines the use case where the ISO 17987 (all parts) will be used. The terminology defined in ISO 17987-1:2016 is common for all LIN communication systems and is used throughout ISO 17987 (all parts). It has been established in order to define the use cases for LIN.

    • sale 15% off
    • Standard
      8 pages
      English language
    • sale 15% off
    • Standard
      8 pages
      English language

ISO 17987-2:2016 specifies a transport protocol and network layer services tailored to meet the requirements of LIN‑based vehicle network systems on local interconnect networks. The protocol specifies an unconfirmed communication. The LIN protocol supports the standardized service primitive interface as specified in ISO 14229‑2. ISO 17987-2:2016 provides the transport protocol and network layer services to support different application layer implementations like - normal communication messages, ...view more

    • sale 15% off
    • Standard
      72 pages
      English language
    • sale 15% off
    • Standard
      72 pages
      English language

ISO 11898-1:2015 specifies the characteristics of setting up an interchange of digital information between modules implementing the CAN data link layer. Controller area network is a serial communication protocol, which supports distributed real-time control and multiplexing for use within road vehicles and other control applications. ISO 11898-1:2015 specifies the Classical CAN frame format and the newly introduced CAN Flexible Data Rate Frame format. The Classical CAN frame format allows bit ra...view more

    • sale 15% off
    • Standard
      65 pages
      English language

ISO 17458-4:2013 specifies the electrical physical layer for FlexRay communications systems. The electrical physical layer for FlexRay is designed for time-triggered networks with data-rates up to 10 Mbit/s to connect automotive electronic control units (ECUs). The medium that is used is dual wires. Signalling on the bus is accomplished by asserting a differential voltage between those wires. Topology variations range from point-to-point connections via linear passive busses and passive stars up...view more

    • sale 15% off
    • Standard
      200 pages
      English language

ISO 17458-1:2013 gives an overview of the structure and the partitioning of ISO 17458 and shows the relation between the different parts. In addition, it outlines the use case scenarios where the ISO 17458 series will be used. The terminology defined in ISO 17458-1:2013 is common for all FlexRay communication systems and is used throughout all parts of ISO 17458.

    • sale 15% off
    • Standard
      24 pages
      English language

ISO 17458-5:2013 specifies the conformance test for the electrical physical layer of the FlexRay communications system. ISO 17458-5:2013 defines a test that considers ISO 9646 and ISO 17458-4. It provides a standardized way to verify whether FlexRay Bus Driver and Active Star products are compliant to ISO 17458-4. The primary motivation is to ensure a level of interoperability of FlexRay Bus Drivers and Active Stars from different sources in a system environment. ISO 17458-5:2013 provides all ne...view more

    • sale 15% off
    • Standard
      930 pages
      English language
    • sale 15% off
    • Standard
      930 pages
      English language

ISO 17458-2:2013 specifies the FlexRay communication protocol which is specified for a dependable automotive network. Some of the basic characteristics of the FlexRay protocol are synchronous and asynchronous frame transfer, guaranteed frame latency and jitter during synchronous transfer, prioritization of frames during asynchronous transfer, single or multi-master clock synchronization time synchronization across multiple networks, error detection and signalling, and scalable fault tolerance.

    • sale 15% off
    • Standard
      352 pages
      English language

ISO 17458-3:2013 specifies the FlexRay protocol conformance test. This test verifies the conformance of FlexRay communication controllers with respect to ISO 17458-2. Some testability requirements are given and are applicable for FlexRay communication controllers to pass the conformance test.

    • sale 15% off
    • Standard
      865 pages
      English language
    • sale 15% off
    • Standard
      865 pages
      English language

ISO 11898-3:2006 specifies characteristics of setting up an interchange of digital information between electronic control units of road vehicles equipped with the controller area network (CAN) at transmission rates above 40 kBit/s up to 125 kBit/s. The CAN is a serial communication protocol which supports distributed control and multiplexing.

    • sale 15% off
    • Standard
      25 pages
      English language
    • sale 15% off
    • Standard
      26 pages
      French language

ISO 11898-4:2004 specifies time-triggered communication in the controller area network (CAN): a serial communication protocol that supports distributed real-time control and multiplexing for use within road vehicles. It is applicable to setting up a time-triggered interchange of digital information between electronic control units (ECU) of road vehicles equipped with CAN, and specifies the frame synchronisation entity that coordinates the operation of both logical link and media access controls ...view more

    • sale 15% off
    • Standard
      32 pages
      English language
    • sale 15% off
    • Standard
      35 pages
      French language

Inserts a new page v and a new introduction. Adds, on page 79, a new clause before clause 8.

    • sale 15% off
    • Standard
      5 pages
      English language

Specifies the data link layer and the physical layer of the VAN, a communications network up to 125 kbit/s, for road vehicle application. The VAN is an access-method oriented multimaster-multislave which allows optimized request/response management by special method of handling a remote transmission request (retaining access to the medium to allow insertion of a response). Defines the general architecture of the network and the content of the data link layer, and the physical layer for transmiss...view more

    • sale 15% off
    • Standard
      104 pages
      English language

Specifies general definitions for low-speed serial data communication up to 125 kbit/s for road vehicle applications. The object is to define the general architecture of the communication network and the content of the data link layer and the physical layer for transmission between the different types of electronic modules on board road vehicles. Parts 2, 3 and 4 are entirely independent.

    • sale 15% off
    • Standard
      4 pages
      English language
    • sale 15% off
    • Standard
      5 pages
      French language
    • sale 15% off
    • Standard
      5 pages
      French language

ISO 16845-2:2014 establishes test cases and test requirements to realize a test plan verifying if the CAN transceiver with implemented selective wake-up functions conform to the specified functionalities. The kind of testing defined in ISO 16845-2:2014 is named as conformance testing.

    • sale 15% off
    • Standard
      105 pages
      English language
    • sale 15% off
    • Standard
      105 pages
      English language

ISO 11898-6:2013 specifies the controller area network (CAN) physical layer for transmission rates up to 1 Mbit/s. It describes the medium access unit (MAU) functions. ISO 11898-6:2013 represents an extension of ISO 11898 2 and ISO 11898 5, specifying a selective wake-up mechanism using configurable CAN frames. Physical layer implementations according to ISO 11898-6:2013 are compliant with all parameters of ISO 11898 2 and ISO 11898 5. Implementations according to ISO 11898-6:2013, ISO 11898 2 a...view more

    • sale 15% off
    • Standard
      14 pages
      English language

ISO 11898-5:2007 specifies the CAN physical layer for transmission rates up to 1 Mbit/s for use within road vehicles. It describes the medium access unit functions as well as some medium dependent interface features according to ISO 8802-2. ISO 11898-5:2007 represents an extension of ISO 11898-2, dealing with new functionality for systems requiring low-power consumption features while there is no active bus communication. Physical layer implementations according to ISO 11898-5:2007 are compliant...view more

    • sale 15% off
    • Standard
      20 pages
      English language