EN ISO 15091:2012
(Main)Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012)
Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012)
ISO 15091:2012 specifies a method for determining the electrical conductivity and the electrical resistance of coating materials. The conductivity is usually measured for water-borne paints and varnishes, including electrodeposition coating materials, and the resistance is usually measured for solvent-borne paints and varnishes. If required, the resistivity of the coating material is calculated from either of these measurements. The method is applicable to products having a conductivity less than 5 µS/cm, corresponding to a resistivity greater than 200 kΩ.cm.
Beschichtungsstoffe - Bestimmung der elektrischen Leitfähigkeit und des elektrischen Widerstandes (ISO 15091:2012)
Diese Internationale Norm legt ein Verfahren zum Bestimmen der elektrischen Leitfähigkeit und des elektrischen Widerstandes von Beschichtungsstoffen fest. Bei wasserverdünnbaren Beschichtungsstoffen einschließlich Elektrotauchlacken wird üblicherweise die Leitfähigkeit gemessen und bei lösemittelverdünnbaren Beschichtungsstoffen üblicherweise der Widerstand. Falls gefordert, wird aus dem jeweiligen Messwert der spezifische elektrische Widerstand des Beschichtungsstoffes berechnet. Das Verfahren ist für Produkte mit einer Leitfähigkeit kleiner als 5 µS/cm, entsprechend einem spezifischen elektrischen Widerstand größer als 200 kΩ ∙ cm anwendbar.
Die elektrische Leitfähigkeit von Beschichtungsstoffen beeinflusst deren Verarbeitbarkeit in einem elektrischen Feld. Dies ist insbesondere von Bedeutung bei Elektrotauchlacken und Beschichtungsstoffen, die elektrostatisch verarbeitet werden.
Peintures et vernis - Détermination de la conductivité et de la résistance électriques (ISO 15091:2012)
L'ISO 15091:2012 spécifie une méthode de détermination de la conductivité et de la résistance électriques des produits de revêtement. La conductivité est généralement mesurée pour les peintures et vernis en phase aqueuse, y compris les produits de revêtement appliqués par électrodéposition, et la résistance est généralement mesurée pour les peintures et vernis en phase solvant. Si nécessaire, la résistivité du produit de revêtement est calculée à partir de l'un ou l'autre de ces mesurages. La méthode s'applique aux produits ayant une conductivité inférieure à 5 µS/cm, correspondant à une résistivité supérieure à 200 kΩ cm.
Barve in laki - Določanje električne prevodnosti in električne upornosti (ISO 15091:2012)
Ta mednarodni standard določa metodo za določanje električne prevodnosti in električne upornosti za premazna sredstva. Prevodnost se običajno meri pri barvah in lakih na vodni osnovi, vključno s premaznimi sredstvi, nanesenimi s potapljanjem in uporabo električnega toka, upornost pa se običajno meri pri raztopinskih barvah in lakih. Če je potrebno, se upornost premaznih sredstev izračuna iz ene od teh meritev. Metoda se uporablja za izdelke s prevodnostjo, manjšo od 5 μS/cm, kar ustreza upornosti, višji od 200 kΩ.cm. Prevodnost premaznih sredstev vpliva na njihovo primernost za obdelavo v prisotnosti električnega polja. To je zlasti pomembno za barve, nanesene s potapljanjem in uporabo električnega toka, in lake, ki so obdelani elektrostatično.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 15091:2013
01-julij-2013
%DUYHLQODNL'RORþDQMHHOHNWULþQHSUHYRGQRVWLLQHOHNWULþQHXSRUQRVWL ,62
Paints and varnishes - Determination of electrical conductivity and resistance (ISO
15091:2012)
Beschichtungsstoffe - Bestimmung der elektrischen Leitfähigkeit und des elektrischen
Widerstandes (ISO 15091:2012)
Peintures et vernis - Détermination de la conductivité et de la résistance électriques (ISO
15091:2012)
Ta slovenski standard je istoveten z: EN ISO 15091:2012
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 15091:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 15091:2013
---------------------- Page: 2 ----------------------
SIST EN ISO 15091:2013
EUROPEAN STANDARD
EN ISO 15091
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 87.040
English Version
Paints and varnishes - Determination of electrical conductivity
and resistance (ISO 15091:2012)
Peintures et vernis - Détermination de la conductivité et de Beschichtungsstoffe - Bestimmung der elektrischen
la résistance électriques (ISO 15091:2012) Leitfähigkeit und des elektrischen Widerstandes (ISO
15091:2012)
This European Standard was approved by CEN on 17 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15091:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15091:2013
EN ISO 15091:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 15091:2013
EN ISO 15091:2012 (E)
Foreword
This document (EN ISO 15091:2012) has been prepared by Technical Committee ISO/TC 35 “Paints and
varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15091:2012 has been approved by CEN as a EN ISO 15091:2012 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 15091:2013
---------------------- Page: 6 ----------------------
SIST EN ISO 15091:2013
INTERNATIONAL ISO
STANDARD 15091
First edition
2012-12-01
Paints and varnishes — Determination of
electrical conductivity and resistance
Peintures et vernis — Détermination de la conductivité et de la
résistance électriques
Reference number
ISO 15091:2012(E)
©
ISO 2012
----------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.