EN ISO 14731:2006
(Main)Welding coordination - Tasks and responsibilities (ISO 14731:2006)
Welding coordination - Tasks and responsibilities (ISO 14731:2006)
ISO 14731:2006 identifies the quality-related responsibilities and tasks included in the coordination of welding-related activities.
In any manufacturing organization, welding coordination can be undertaken by one or a number of persons.
Welding coordination requirements can be specified by a manufacturer, a contract or an application standard.
Schweißaufsicht - Aufgaben und Verantwortung (ISO 14731:2006)
Diese Internationale Norm legt die qualitätsbezogene Verantwortung und die Aufgaben, einschließlich der Koordinierung der schweißtechnischen Tätigkeiten, fest.
In jeder Herstellerorganisation kann die Schweißaufsicht durch eine oder mehrere Personen ausgeübt werden.
Anforderungen an die Schweißaufsicht können durch einen Hersteller, einen Vertrag oder durch eine Anwendungsnorm festgelegt werden.
Coordination en soudage - Tâches et responsabilités (ISO 14731:2006)
L'ISO 14731:2006 identifie les tâches et responsabilités relatives à la qualité qui entrent dans le cadre de la coordination des activités liées au soudage.
Dans les organisations de fabrication, la coordination en soudage peut être confiée à une seule personne ou à plusieurs personnes.
Les exigences relatives à la coordination en soudage peuvent être spécifiées par un fabricant, un contrat ou une norme d'application.
Koordinacija varilnih del – Naloge in odgovornosti (ISO 14731:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2007
1DGRPHãþD
SIST EN 719:1995
Koordinacija varilnih del – Naloge in odgovornosti (ISO 14731:2006)
Welding coordination - Tasks and responsibilities (ISO 14731:2006)
Schweißaufsicht - Aufgaben und Verantwortung (ISO 14731:2006)
Coordination en soudage - Tâches et responsabilités (ISO 14731:2006)
Ta slovenski standard je istoveten z: EN ISO 14731:2006
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 14731
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2006
ICS 25.160.01 Supersedes EN 719:1994
English Version
Welding coordination - Tasks and responsibilities (ISO
14731:2006)
Coordination en soudage - Tâches et responsabilités (ISO Schweißaufsicht - Aufgaben und Verantwortung (ISO
14731:2006) 14731:2006)
This European Standard was approved by CEN on 29 September 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14731:2006: E
worldwide for CEN national Members.
Foreword
This document (EN ISO 14731:2006) has been prepared by Technical Committee CEN/TC 121
"Welding", the secretariat of which is held by DIN, in collaboration with Technical Committee
ISO/TC 44 "Welding and allied processes".
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by April 2007, and conflicting national
standards shall be withdrawn at the latest by April 2007.
This document supersedes EN 719:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
INTERNATIONAL ISO
STANDARD 14731
Second edition
2006-10-01
Welding coordination — Tasks
and responsibilities
Coordination en soudage — Tâches et responsabilités
Reference number
ISO 14731:2006(E)
©
ISO 2006
ISO 14731:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO 14731:2006(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Tasks and responsibilities. 2
4.1 Quality-related tasks. 2
4.2 Specification of tasks and responsibilities. 2
5 Job description . 2
5.1 General. 2
5.2 Tasks. 2
5.3 Responsibilities . 2
6 Technical knowledge. 3
6.1 General knowledge requirements of all welding coordination personnel. 3
6.2 Specific knowledge requirements of responsible welding coordination personnel . 3
Annex A (informative) Recommendations for technical knowledge in welding. 4
Annex B (normative) Essential welding-related tasks in accordance with ISO 3834 to be
considered when appropriate. 5
Bibliography . 10
ISO 14731:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14731 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 121, Welding, in collaboration with Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 11, Qualification requirements for welding and allied processes personnel, in accordance
with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 14731:1997), which has been technically
revised.
Requests for official interpretations of any aspect of this International Standard should be directed to the
Secretariat of ISO/TC 44/SC 11 via your national standards body. A complete listing of these bodies can be
found at http://www.iso.org.
iv © ISO 2006 – All rights reserved
ISO 14731:2006(E)
Introduction
Welding is a special process, which requires the coordination of welding operations in order to establish
confidence in welding fabrication and reliable performance in service. The tasks and responsibilities of
personnel involved in welding-related activities (e. g. planning, executing, supervising and inspection) should
be clearly defined.
INTERNATIONAL STANDARD ISO 14731:2006(E)
Welding coordination — Tasks and responsibilities
1 Scope
This International Standard identifies the quality-related responsibilities and tasks included in the coordination
of welding-related activities.
In any manufacturing organization, welding coordination can be undertaken by one or a number of persons.
Welding coordination requirements can be specified by a manufacturer, a contract or an application standard.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 3834-1, Quality requirements for fusion welding of metallic materials — Part 1: Criteria for the selection of
the appropriate level of quality requirements
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
manufacturer
person or organization responsible for the welding production
3.2
welding coordination
coordination of manufacturing operations for all welding and welding-related activities
3.3
welding coordinator
person responsible and competent to perform welding coordination
NOTE There might be a need for nominating different welding coordinators for different tasks.
3.4
welding inspection
conformity evaluation of welding-related matters by observation and judgement accompanied as appropriate
by measurement or testing
NOTE Welding inspection is a part of welding coordination.
ISO 14731:2006(E)
4 Tasks and responsibilities
4.1 Quality-related tasks
Annex B shall be used as a guide to allocate quality-related tasks and responsibilities to welding coordination
personnel. It may be supplemented for special application. Not all the items shall necessarily apply to all
manufacturing organizations or quality system requirements, and a selection should be made as appropriate.
For example, where there is no destructive testing or non-destructive testing, B.14 b) and c) do not apply.
4.2 Specification of tasks and responsibilities
The tasks of the welding coordinator shall be selected from the applicable part of ISO 3834, in accordance
with the criteria defined in ISO 3834-1 (see Annex B).
Each single activity in Annex B may be associated with a number of tasks and responsibilities, such as:
⎯ specification and preparation,
⎯ control,
⎯ inspection, check or witnessing.
Where welding coordination is carried out by more than one person, the tasks and responsibilities shall be
clearly allocated, such that responsibility is clearly defined and the persons are qualified for each specific
welding coordination task.
Welding coordination is the sole responsibility of the manufacturer.
The manufacturer shall appoint at least one responsible welding coordinator.
Welding coordination may be subcontracted. However, compliance to this International Standard remains the
responsibility of the manufacturer.
5 Job description
5.1 General
A job description is required for the welding coordination personnel, which shall include their tasks and
responsibilities.
5.2 Tasks
For identification of the tasks assigned to the welding coordination personnel, see 4.2 and Annex B.
5.3 Responsibilities
The responsibilities assigned to the welding coordination personnel are identified as follows:
⎯ their position in the manufacturing organization and their responsibilities;
⎯ the extent of authorization accorded to them to accept by signature on behalf of the manufacturing
organization, as needed in order to fulfil the assigned tasks, e.g. for procedure specification and
supervision reports;
⎯ the extent of authorization accorded to them to carry out the assigned tasks.
2 © ISO 2006 – All rights reserved
ISO 14731:2006(E)
6 Technical knowledge
6.1 General knowledge requirements of all welding coordination personnel
For all tasks assigned, welding coo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.