Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts.
This part of the series defines the classification levels as well as the requirements for manufacturers of welded railway vehicles and components.
This part of the series specifies:
- inspections and testing to be executed on the welds;
- destructive as well as non-destructive tests to be performed;
- necessary documentation to issue to declare the conformity of the products.

Bahnanwendungen - Schweißen von Schienenfahrzeugen und -fahrzeugteilen - Teil 5: Prüfung und Dokumentation

Diese Normenreihe gilt für das Schweißen metallischer Werkstoffe bei der Herstellung und Instandsetzung von Schienenfahrzeugen und -fahrzeugteilen.
Dieses Dokument
—   definiert die an den Schweißnähten durchzuführenden Prüfungen,
—   legt die Durchführung der zerstörenden und zerstörungsfreien Prüfungen fest, und
—   definiert die notwendigen Dokumentationen zur Herausgabe der Produktkonformitätserklärung.

Applications ferroviaires - Soudage des véhicules et des composants ferroviaires - Partie 5 : Vérifications, contrôles et documentation

Le présent document spécifie :
—   les contrôles et les essais à effectuer sur les soudures ;
—   les contrôles destructifs et non destructifs à réaliser ;
—   la documentation nécessaire à la déclaration de conformité des produits.

Železniške naprave - Varjenje železniških vozil in sestavnih delov - 5. del: Nadzor, preskušanje in dokumentacija

Ta skupina standardov se uporablja za varjenje kovinskih materialov pri izdelavi in vzdrževanju železniških vozil ter njihovih delov.
Ta del skupine standardov določa stopnje razvrstitve in zahteve za proizvajalce varjenih železniških vozil in komponent.
Ta del skupine standardov določa:
– pregled in preskušanje zvarov;
– porušitvene in neporušitvene preskuse, ki jih je treba izvesti;
– dokumentacijo, ki jo je treba izdati za potrditev skladnosti izdelkov.

General Information

Status
Published
Publication Date
14-Mar-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Mar-2023
Due Date
07-Dec-2021
Completion Date
15-Mar-2023

Relations

Buy Standard

Standard
EN 15085-5:2023
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 15085-5:2020
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 15085-5:2023
01-maj-2023
Železniške naprave - Varjenje železniških vozil in sestavnih delov - 5. del: Nadzor,
preskušanje in dokumentacija
Railway applications - Welding of railway vehicles and components - Part 5: Inspection,
testing and documentation
Bahnanwendungen - Schweißen von Schienenfahrzeugen und -fahrzeugteilen - Teil 5:
Prüfung und Dokumentation
Applications ferroviaires - Soudage des véhicules et des composants ferroviaires - Partie
5 : Vérification, contrôles et documentations
Ta slovenski standard je istoveten z: EN 15085-5:2023
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 15085-5:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 15085-5:2023

---------------------- Page: 2 ----------------------
SIST EN 15085-5:2023


EN 15085-5
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2023
EUROPÄISCHE NORM
ICS 25.160.10; 45.060.01 Supersedes EN 15085-5:2007
English Version

Railway applications - Welding of railway vehicles and
components - Part 5: Inspection, testing and
documentation
Applications ferroviaires - Soudage des véhicules et des Bahnanwendungen - Schweißen von
composants ferroviaires - Partie 5 : Vérification, Schienenfahrzeugen und -fahrzeugteilen - Teil 5:
contrôles et documentation Prüfung und Dokumentation
This European Standard was approved by CEN on 23 January 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15085-5:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 15085-5:2023
EN 15085-5:2023 (E)
Contents

European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Inspection and testing of welded joints . 7
4.1 General . 7
4.2 Inspection and testing before welding . 7
4.2.1 Welding coordination team . 7
4.2.2 Welder or welding operator . 7
4.3 Inspection and testing during welding . 8
4.3.1 Welding coordination team .
...

SLOVENSKI STANDARD
oSIST prEN 15085-5:2020
01-december-2020
Železniške naprave - Varjenje železniških vozil in sestavnih delov - 5. del: Nadzor,
preskušanje in dokumentacija
Railway applications - Welding of railway vehicles and components - Part 5: Inspection,
testing and documentation
Bahnanwendungen - Schweißen von Schienenfahrzeugen und -fahrzeugteilen - Teil 5:
Prüfung und Dokumentation
Applications ferroviaires - Soudage des véhicules et des composants ferroviaires - Partie
5 : Vérification, contrôles et documentations
Ta slovenski standard je istoveten z: prEN 15085-5
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
oSIST prEN 15085-5:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15085-5:2020

---------------------- Page: 2 ----------------------
oSIST prEN 15085-5:2020


DRAFT
EUROPEAN STANDARD
prEN 15085-5
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2020
ICS 25.160.10; 45.060.01 Will supersede EN 15085-5:2007
English Version

Railway applications - Welding of railway vehicles and
components - Part 5: Inspection, testing and
documentation
Applications ferroviaires - Soudage des véhicules et des Bahnanwendungen - Schweißen von
composants ferroviaires - Partie 5 : Vérification, Schienenfahrzeugen und -fahrzeugteilen - Teil 5:
contrôles et documentations Prüfung und Dokumentation
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15085-5:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 15085-5:2020
prEN 15085-5:2020 (E)
Contents

European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Inspection and testing of welded joints . 6
4.1 General . 6
4.2 Inspection and testing before welding . 6
4.3 Inspection and testing during welding . 6
4.4 Inspection and testing after welding .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.