EN 3475-501:2002
(Main)Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through
This standard specifies a method of measuring the resistance to cut-through of an insulated conductor. This test is limited to insulations with a thickness of 0,38 mm or less.
It shall be used together with EN 3475-100 and ASTM-D-3032-86 paragraph 22 - Dynamic cut-through.
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrt, Verwendung - Prüfverfahren - Teil 501: Kerbfestigkeit
Diese Norm legt ein Verfahren zur Prüfung der Kerbfestigkeit von Adern fest. Diese Prüfung ist auf Adern beschränkt, deren Isolierwanddicke 0,38 mm nicht überschreitet.
Sie ist in Verbindung mit EN 3475-100 und ASTM-D-3032-86, Abschnitt 22 - Kerbfestigkeitsprüfung - anzu-wenden.
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essai - Partie 501 : Résistance à la coupure
Cette norme définit une méthode pour mesurer la résistance à la coupure d'un conducteur isolé. La méthode est limitée aux isolants dont l'épaisseur ne dépasse pas 0,38 mm.
Elle doit être utilisée conjointement avec EN 3475-100 et ASTM-D-3032-86 paragraphe 22 - Résistance à la coupure.
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-throughLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrt, Verwendung - Prüfverfahren - Teil 501: KerbfestigkeitSérie aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essai - Partie 501 : Résistance a la coupureAerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3475-501:2002SIST EN 3475-501:2004en01-maj-2004SIST EN 3475-501:2004SLOVENSKI
STANDARD
SIST EN 3475-501:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-501February 2002ICS 49.060English versionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 501: Dynamic out-throughSérie aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essais - Partie 501: Résistanceà la coupureLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrt,Verwendung - Prüfverfahren - Teil 501: KerbfestigkeitThis European Standard was approved by CEN on 6 August 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-501:2002 ESIST EN 3475-501:2004
EN 3475-501:2002 (E)2ForewordThis document (
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.