EN ISO/ASTM 52926-5:2023
(Main)Additive manufacturing of metals - Qualification principles - Part 5: Qualification of operators for DED-Arc (ISO/ASTM 52926-5:2023)
Additive manufacturing of metals - Qualification principles - Part 5: Qualification of operators for DED-Arc (ISO/ASTM 52926-5:2023)
This document identifies the capabilities and responsibilities required for the qualification of the AM operators on the field of the additive manufacturing technologies dealing with metallic parts production, specifically for the employment of directed energy deposition – arc with metals (DED-Arc/M).
This document identifies criteria for the theoretical and practical assessment of personnel operating DED-Arc/M machines. The activities and procedures foreseen to be performed by the DED-Arc/M operator are also part of this document.
This document is intended to provide an outline for qualification of AM machine operators in general industrial applications.
Additive Fertigung von Metallen - Grundsätze der Qualifizierung - Teil 5: Grundlegende Qualifizierung von Maschinenbedienern für DED‑Arc (ISO/ASTM 52926‑5:2023)
Dieses Dokument bestimmt die Fähigkeiten und Verantwortlichkeiten, die für die Qualifizierung der Bediener auf dem Gebiet der Additiven Fertigungstechnologien erforderlich sind, die sich mit der Herstellung von Metallteilen befassen, insbesondere für den Einsatz von Materialauftrag mit gerichteter Energieeinbringung mittels Lichtbogen mit Metallen (DED Arc/M).
Dieses Dokument bestimmt Kriterien für die theoretische und praktische Beurteilung von Personal, das DED Arc/M-Maschinen bedient. Die für den DED Arc/M-Bediener vorgesehenen Tätigkeiten und Verfahren sind ebenfalls Bestandteil dieses Dokuments.
Dieses Dokument ist als Gliederung für die Qualifizierung von Maschinenbedienern in der additiven Fertigung in allgemeinen industriellen Anwendungen konzipiert.
Fabrication additive de métaux - Principes de qualification - Partie 5: Qualification des opérateurs pour DED-Arc (ISO/ASTM 52926-5:2023)
Le présent document identifie les capacités et les responsabilités exigées pour la qualification des opérateurs de FA dans le domaine des technologies de fabrication additive traitant de la production de pièces métalliques, spécifiquement pour l'emploi de dépôt de matière sous énergie concentrée – arc avec métaux (DED-Arc/M).
Le présent document identifie les critères pour l'évaluation théorique et pratique du personnel utilisant des machines de DED- Arc/M. Les activités et procédures prévues pour être exécutées par l'opérateur de DED- Arc/M font également partie du présent document.
Le présent document est destiné à fournir une vue d'ensemble pour la qualification des opérateurs de machines de FA dans les applications industrielles générales.
Aditivna proizvodnja kovinskih izdelkov - Kvalifikacija - 5. del: Kvalifikacija operaterjev za usmerjeno nanašanje materiala in energije z oblokom (DED-Arc) (ISO/ASTM 52926-5:2023)
Ta dokument določa sposobnosti in odgovornosti, ki se jih zahteva za kvalifikacijo operaterjev aditivne proizvodnje na področju tehnologij aditivne proizvodnje kovinskih delov, predvsem za izvajanje usmerjenega nanašanja materiala in energije z oblokom (DEDArc/M).
V tem dokumentu so opredeljena merila za teoretično in praktično oceno osebja, ki upravlja
stroje za usmerjeno nanašanje materiala in energije z oblokom. Aktivnosti in postopki, ki naj bi jih predvidoma izvajal operater stroja za usmerjeno nanašanje materiala in energije z oblokom, so tudi del tega dokumenta.
Namen tega dokumenta je zagotoviti opis za kvalifikacijo operaterjev strojev za aditivno proizvodnjo v splošni industrijski uporabi.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO/ASTM 52926-5:2024
01-marec-2024
Aditivna proizvodnja kovinskih izdelkov - Kvalifikacija - 5. del: Kvalifikacija
operaterjev za usmerjeno nanašanje materiala in energije z oblokom (DED-Arc)
(ISO/ASTM 52926-5:2023)
Additive manufacturing of metals - Qualification principles - Part 5: Qualification of
operators for DED-Arc (ISO/ASTM 52926-5:2023)
Additive Fertigung von Metallen - Grundsätze der Qualifizierung - Teil5: Grundlegende
Qualifizierung von Maschinenbedienern für DED-Arc (ISO/ASTM 52926-5:2023)
Fabrication additive de métaux - Principes de qualification - Partie 5: Qualification des
opérateurs pour DED-Arc (ISO/ASTM 52926-5:2023)
Ta slovenski standard je istoveten z: EN ISO/ASTM 52926-5:2023
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.030 3D-tiskanje Additive manufacturing
SIST EN ISO/ASTM 52926-5:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO/ASTM 52926-5:2024
---------------------- Page: 2 ----------------------
SIST EN ISO/ASTM 52926-5:2024
EN ISO/ASTM 52926-5
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 03.100.30; 25.030
English Version
Additive manufacturing of metals - Qualification principles
- Part 5: Qualification of operators for DED-Arc (ISO/ASTM
52926-5:2023)
Fabrication additive de métaux - Principes de Additive Fertigung von Metallen - Grundsätze der
qualification - Partie 5: Qualification des opérateurs Qualifizierung - Teil5: Grundlegende Qualifizierung
pour DED-Arc (ISO/ASTM 52926-5:2023) von Maschinenbedienern für DED-Arc (ISO/ASTM
52926-5:2023)
This European Standard was approved by CEN on 7 November 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/ASTM 52926-5:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO/ASTM 52926-5:2024
EN ISO/ASTM 52926-5:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO/ASTM 52926-5:2024
EN ISO/ASTM 52926-5:2023 (E)
European foreword
This document (EN ISO/ASTM 52926-5:2023) has been prepared by Technical Committee ISO/TC 261
"Additive manufacturing" in collaboration with Technical Committee CEN/TC 438 “Additive
Manufacturing” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Se
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.