Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements

This European Standard specifies material and design requirements for electrostatic dissipative protective clothing, including hoods and caps, used as part of a total earthed system, to avoid incendiary discharges, where the minimum ignition energy of an explosive atmosphere is not less than 0,016 mJ.
In the context of this European Standard, a total earthed system is one in which personnel and other conductors are connected to earth via a resistance of less than 108 Ω.
The material and design requirements do not presume adequate earthing of additional equipment worn or carried in contact with clothing, e.g. breathing apparatus, etc. If such additional equipment is required to be earthed, other requirements beyond the scope of this European Standard may be necessary.
The scope of this standard does not include electrostatic dissipative protective gloves or footwear that are separate and not integral parts of garments.
The material and design requirements may not provide sufficient protection in oxygen enriched flammable atmospheres.
NOTE Additional information about oxygen enriched flammable atmospheres can be found in CEN/CLC/TR 16832:2015 [1].
This European Standard is not applicable for protection against mains voltages.

Schutzkleidung - Elektrostatische Eigenschaften - Teil 5: Leistungsanforderungen an Material und Konstruktionsanforderungen

Diese Europäische Norm legt Anforderungen an Materialien und Konstruktion für elektrostatisch ableitfähige Schutzkleidung, einschließlich Hauben und Kappen, die Bestandteil eines vollständig geerdeten Systems zur Vermeidung von zündfähigen Entladungen ist, fest, wo die Mindestzündenergie einer explosionsfähigen Atmosphäre nicht weniger als 0,016 mJ beträgt.
Im Rahmen dieser Europäischen Norm ist ein vollständig geerdetes System definiert als ein System, in dem Personal und andere Leiter über einen Widerstand von weniger als 108 Ω mit der Erde verbunden sind.
Die Anforderungen an Materialien und Konstruktion ergeben nicht zwangsläufig eine angemessene Erdung zusätzlich getragener oder in Kontakt mit der Kleidung stehender Ausrüstung, wie z. B. Atemschutzgeräte. Falls zusätzliche Ausrüstung geerdet werden muss, können unter Umständen weitere Anforderungen außerhalb des Anwendungsbereichs dieser Europäischen Norm erforderlich sein.
Der Anwendungsbereich dieser Norm beinhaltet keine elektrostatisch ableitfähige Schutzhandschuhe oder elektrostatisch ableitfähiges Schuhwerk, welche separate und nicht integrale Bestandteile der Kleidung sind.
In brennbaren Atmosphären, die mit Sauerstoff angereichert sind, ist es möglich, dass die Anforderungen an Materialien und Konstruktion keinen ausreichenden Schutz bieten.
ANMERKUNG Zusätzliche Informationen zu brennbaren Atmosphären, die mit Sauerstoff angereichert sind, können in CEN/CLC/TR 16832:2015 [1] gefunden werden.
Diese Europäische Norm gilt nicht für den Schutz vor Netzspannungen.

Vêtements de protection - Propriétés électrostatiques - Partie 5 : Exigences de performance des matériaux et de conception

La présente Norme européenne spécifie des exigences relatives à la conception et aux matériaux des vêtements de protection de dissipation de charge électrostatique, y compris les capuches et les casquettes, utilisés en tant que partie d'un système complet relié à la terre, pour éviter les décharges incendiaires, lorsque l'énergie minimale d'inflammation d'une atmosphère explosive n'est pas
inférieure à 0,016 mJ.
Dans le contexte de la présente Norme européenne, un système complet relié à la terre est un système dans lequel les personnes et autres conducteurs sont reliés à la terre via une résistance de moins de 108 Ω.
Les exigences qui s'appliquent aux matériaux et à la conception n'impliquent pas que la mise à la terre d'équipements additionnels portés sur les vêtements ou mis en contact avec eux (appareil respiratoire, par exemple) serait adéquate. S'il s'avérait nécessaire de mettre à la terre ce type d'équipement additionnel, il y aurait lieu d'appliquer d'autres exigences, ne relevant pas du domaine d'application de la présente Norme européenne.
Le domaine d'application de la présente norme n'inclut pas les chaussures ni les gants de sécurité de dissipation de charge électrostatique qui sont des éléments distincts ne faisant pas partie intégrante des vêtements.
Il se peut que les exigences relatives aux matériaux et à la conception n'assurent pas une protection suffisante dans les atmosphères inflammables enrichies en oxygène.
NOTE Des informations complémentaires sur les atmosphères inflammables enrichies en oxygène peuvent être consultées dans le CEN/CLC/TR 16832:2015 [1].
La présente Norme européenne n'est pas applicable à la protection contre les risques liés aux différentes tensions électriques.

Varovalna obleka - Elektrostatične lastnosti - 5. del: Lastnosti materialov in zahteve za načrtovanje

Ta evropski standard določa zahteve glede materiala in načrtovanja varovalne obleke, ki odvaja elektrostatični naboj in se uporablja kot del povsem ozemljenega sistema, da se izogne razelektritvam z iskrenjem. Zahteve morda ne zadostujejo za področja, obogatena s kisikom in z vnetljivim ozračjem. Ta evropski standard se ne uporablja za zaščito pred omrežno napetostjo.

General Information

Status
Published
Publication Date
11-Sep-2018
Withdrawal Date
30-Mar-2019
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
03-Mar-2024
Completion Date
03-Mar-2024

Relations

Buy Standard

Standard
EN 1149-5:2018
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 1149-5:2017
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzkleidung - Elektrostatische Eigenschaften - Teil 5: Leistungsanforderungen an Material und KonstruktionsanforderungVêtements de protection - Propriétés électrostatiques - Partie 5 : Exigences de performance des matériaux et de conceptionProtective clothing - Electrostatic properties - Part 5: Material performance and design requirements13.340.10Varovalna oblekaProtective clothingICS:Ta slovenski standard je istoveten z:EN 1149-5:2018SIST EN 1149-5:2018en,fr,de01-december-2018SIST EN 1149-5:2018SLOVENSKI
STANDARDSIST EN 1149-5:20081DGRPHãþD



SIST EN 1149-5:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1149-5
September
t r s z ICS
s uä u v rä s r Supersedes EN
s s v {æ wã t r r zEnglish Version
Protective clothing æ Electrostatic properties æ Part
wã Material performance and design requirements Vêtements de protection æ Propriétés électrostatiques æPartie
w ã Exigences de performance des matériaux et de conception
Schutzkleidung æ Elektrostatische Eigenschaften æ Teil
wã Leistungsanforderungen an Material und Konstruktionsanforderungen This European Standard was approved by CEN on
u r April
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s s v {æ wã t r s z ESIST EN 1149-5:2018



EN 1149-5:2018 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Requirements . 6 4.1 General . 6 4.2 Electrostatic requirements . 6 4.2.1 Material requirements . 6 4.2.2 Design requirements . 7 5 Marking . 8 6 Information supplied by the manufacturer . 9 Annex A (informative)
Explanation . 10 Annex B (informative)
Significant technical changes between this document
and the previous edition . 11 Annex ZA (informative)
Relationship between this European Standard and the essential requirements of Regulation (EU) 2016/4
...

SLOVENSKI STANDARD
oSIST prEN 1149-5:2017
01-januar-2017
9DURYDOQDREOHND(OHNWURVWDWLþQHODVWQRVWLGHO=DKWHYDQHODVWQRVWL]D
PDWHULDOHLQ]DQDþUWRYDQMHREODþLO
Protective clothing - Electrostatic properties - Part 5: Material performance and design
requirements
Schutzkleidung - Elektrostatische Eigenschaften - Teil 5: Leistungsanforderungen an
Material und Konstruktionsanforderung
Vêtements de protection - Propriétés électrostatiques - Partie 5 : Exigences de
performance des matériaux et de conception
Ta slovenski standard je istoveten z: prEN 1149-5
ICS:
13.340.10 Varovalna obleka Protective clothing
oSIST prEN 1149-5:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1149-5:2017

---------------------- Page: 2 ----------------------
oSIST prEN 1149-5:2017


DRAFT
EUROPEAN STANDARD
prEN 1149-5
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2016
ICS 13.340.10 Will supersede EN 1149-5:2008
English Version

Protective clothing - Electrostatic properties - Part 5:
Material performance and design requirements
Vêtements de protection - Propriétés électrostatiques - Schutzkleidung - Elektrostatische Eigenschaften - Teil
Partie 5 : Exigences de performance des matériaux et 5: Leistungsanforderungen an Material und
de conception Konstruktionsanforderung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 162.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1149-5:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1149-5:2017
prEN 1149-5:2016 (E)
Contents Page

European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 6
4.1 General . 6
4.2 Electrostatic requirements . 6
4.2.1 Material requirements . 6
4.2.2 Design requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.