EN 13012:2001
(Main)Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
This European Standard specifies safety and environmental requirements for the construction and performance of
nozzles to be fitted to metering pumps and dispensers installed at filling stations and which are used to dispense
liquid fuels into the tanks of motor vehicles, boats and light aircraft and into portable containers, at flow rates up to
200 l.min-1.
The requirements apply to automatic nozzles dispensing flammable liquid fuels at ambient temperatures from
-20 °C to +40 °C with the possibility for an extended temperature range.
This European Standard does not apply to equipment dispensing liquefied petroleum gas nor compressed natural
gas.
This European Standard does not include any requirements for metering performance such as may be specified
under the Measuring Instruments Directive nor those specified under the Electromagnetic Compatibility Directive.
Vapour recovery efficiency rates are not considered within this standard.
Tankstellen - Anforderungen an Bau- und Arbeitsweise von automatischen Zapfventilen für die Benutzung an Zapfsäulen
Diese Europäische Norm legt die sicherheitstechnischen und Umweltanforderungen an den Bau und die Arbeitsweise von Zapfventilen fest, die an Zapfsäulen und druckversorgten Zapfsäulen auf Tankstellen installiert werden, und die für die Abgabe von flüssigen Kraftstoffen in Tanks von Automobilen, Booten und Leichtflugzeugen und in tragbare Behälter bei Durchflussraten bis zu 200 l·min-1 eingesetzt werden.
Die Anforderungen beziehen sich auf automatische Zapfventile für die Abgabe von brennbaren flüssigen Kraftstoffen bei Umgebungstemperaturen von - 20 °C bis + 40 °C, mit der Möglichkeit einer Erweiterung des Temperatur-bereiches.
Diese Norm gilt nicht für Anlagen für die Abgabe von Flüssiggas oder verdichtetem Erdgas.
Diese Norm enthält weder Anforderungen für Messinstrumente wie die, die in der Direktive für Messinstrumente, noch solche, die in der Direktive für elektromagnetische Kompatibilität spezifiziert sind.
Effizienzraten für Gasrückführung fallen nicht in den Anwendungsbereich dieser Norm.
Stations service - Construction et performances des pistolets automatiques de remplissage utilisés sur les distributeurs de carburant
La présente Norme européenne spécifie les exigences relatives à la sécurité et à la protection de l'environnement pour la construction et les performances des pistolets de remplissage montés sur des ensembles de mesurage et de distribution installés sur stations service et utilisés pour distribuer des carburants liquides dans des réservoirs de véhicules à moteur, de bateaux, d'avions légers et dans des réservoirs portables, à des débits pouvant atteindre 200 lmin-1.
Les exigences concernent les pistolets automatiques de remplissage distribuant des carburants liquides inflammables, à des températures comprises entre -20 °C et +40 °C avec la possibilité d'une gamme de température étendue.
La présente Norme européenne ne s'applique ni au matériel de distribution de gaz de pétrole liquéfié, ni au matériel de distribution de gaz naturel comprimé.
La présente Norme européenne ne comprend aucune exigence concernant les performances métrologiques telles que celles pouvant être spécifiées dans la directive concernant les instruments de mesure, pas plus que celles contenues dans la directive concernant la compatibilité électromagnétique.
Les taux d'efficacité de la récupération de vapeur ne sont pas abordés dans la présente norme.
Bencinske črpalke - Izdelava in lastnosti avtomatskih ventilov, vgrajenih v avtomatih za točenje goriva
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensersStations service - Construction et performances des pistolets automatiques de remplissage utilisés sur les distributeurs de carburantTankstellen - Anforderungen an Bau- und Arbeitsweise von automatischen Zapfventilen für die Benutzung an Zapfsäulen75.200Petroleum products and natural gas handling equipmentICS:SIST EN 13012:2002enTa slovenski standard je istoveten z:EN 13012:200101-maj-2002SIST EN 13012:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13012November 2001ICS 75.200English versionPetrol filling stations - Construction and performance ofautomatic nozzles for use on fuel dispensersStations service - Construction et performances despistolets automatiques de remplissage utilisés sur lesdistributeurs de carburantTankstellen - Anforderungen an Bau- und Arbeitsweise vonautomatischen Zapfventilen für die Benutzung anZapfsäulenThis European Standard was approved by CEN on 3 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13012:2001 E
EN 13012 : 2001 (E)ContentspageForeword. 21 Scope. 32 Normative references.33 Terms and definitions. 44 Construction. 54.1 General. 54.2 Guard. 54.3Inlet threads. 64.4 Safe break. 64.5 Latch.64.6 Automatic de-activating mechanism.65 Physical properties. 76 Functional requirements. 77 Frequency of testing. 88 Marking. 9Annex A (normative) Test preconditioning. 10Annex B (normative)Test methods. 11Annex ZA (informative)Clauses of this European Standard addressing essential requirements orother provisions of EU Directives. 17ForewordThis European Standard has been prepared by Technical Committee CEN/TC 221 "Shop fabricated metallic tanksand equipment for storage tanks and for service stations", the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2002, and conflicting national standards shall be withdrawn at the latest byMay 2002.This European Standard has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive.For relationship with EU-Directives, see informative annex ZA, which is an integral part of this standard.The annexes A and B are normative, annex ZA is informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Nether
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.