EN ISO 1622-2:1999

Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995)

Cancels and replaces the first edition (1980). Specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PS moulding and extrusion materials. Gives requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing. Gives procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made. Lists properties and test methods which are suitable and necessary to characterize PS moulding and extrusion materials.

Kunststoffe - Polystyrol (PS)-Formmassen - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 1622-2:1995)

Dieser Teil von ISO 1622 legt die Bedingungen zur Herstellung von Probeko(rpern und die zur Bestimmung der Eigenschaften von PS-Formmassen anzuwendenden Pru(fverfahren fest. Anforderungen an die Behandlung des Probenmaterials und fu(r das Konditionieren des Probenmaterials vor der Herstellung der Probeko(rper und der Probeko(rper vor der Pru(fung sind ebenfalls enthalten.

Plastiques - Polystyrène (PS) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 1622-2:1995)

La présente partie de l'ISO 1622 prescrit les méthodes de préparation des éprouvettes et les méthodes d'essai à appliquer pour déterminer les propriétés des PS pour moulage et extrusion. Elle indique les exigences requises lors de la manipulation du matériau pour essai, ainsi que lors du conditionnement dudit matériau avant moulage et des éprouvettes avant l'essai. Elle précise les modes opératoires et les conditions nécessaires à la préparation des éprouvettes, ainsi que les modes opératoires de mesurage des propriétés des matériaux à partir desquels ces éprouvettes sont fabriquées. Elle fournit également une liste des propriétés et des méthodes d'essai appropriées et nécessaires à la caractérisation des PS pour moulage et extrusion. Les propriétés ont été choisies à partir des méthodes d'essai générales données dans l'ISO 10350. D'autres méthodes d'essai, présentant une importance particulière ou largement utilisées dans le cas de ces matériaux pour moulage et extrusion, sont également incluses dans la présente partie de l'ISO 1622, de même qu'elles figurent dans les propriétés de désignation de l'ISO 1622-1.

Polimerni materiali - Polistirenski (PS) materiali za oblikovanje in ekstrudiranje - 2. del: Priprava preskušancev in določanje lastnosti (ISO 1622-2:1995)

General Information

• Status: Withdrawn
• Publication Date: 18-May-1999
• Withdrawal Date: 16-Jun-2020
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/SC 1/WG 9 - Styrenics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-Jun-2020
• Ref Project: SIST EN ISO 1622-2:2000 - Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995)

Relations

• Replaced By: EN ISO 24022-2:2020 - Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24022-2:2020)
• Effective Date: 16-Jan-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1622-2:2000
01-maj-2000
3ROLPHUQLPDWHULDOL3ROLVWLUHQVNL36PDWHULDOL]DREOLNRYDQMHLQHNVWUXGLUDQMH
GHO3ULSUDYDSUHVNXãDQFHYLQGRORþDQMHODVWQRVWL,62
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test
specimens and determination of properties (ISO 1622-2:1995)
Kunststoffe - Polystyrol (PS)-Formmassen - Teil 2: Herstellung von Probekörpern und
Bestimmung von Eigenschaften (ISO 1622-2:1995)
Plastiques - Polystyrene (PS) pour moulage et extrusion - Partie 2: Préparation des
éprouvettes et détermination des propriétés (ISO 1622-2:1995)
Ta slovenski standard je istoveten z: EN ISO 1622-2:1999
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 1622-2:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1622-2:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 1622-2:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 1622-2:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 1622-2:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 1622-2:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 1622-2:2000
INTERNATIONAL ISO
STANDARD 1622-2
Second edition
1995-05-01
- Polystyrene (PS) moulding and
Plastics
extrusion materials -
Part 2:
Preparation of test specimens and
determination of properties
Plas tiques - Polystyrkne (PS) pour moulage et extrusion -
Partie 2: Prkpara tion des bprouve ttes et dktermina tion des propri&&
Reference number
ISO 1622~2:1995(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 1622-2:2000
ISO 162202:1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 1622-2 was prepared by Technical Committee
ISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic materials.
This second edition cancels and replaces the first edition
(ISO 1622-2:1980) and includes the following changes:
The text has been brought into accordance with the frame text developed
by SC 9. The table of test methods has been revised in accordance with
ISO 10350.
ISO 1622 consists of the following Parts, under the general title
Plas tics - Polystyrene (PS) moulding and extrusion materials:
- Part 1: Designation System and basis for specifications
- Part 2: Preparation of fest specimens and determination of proper-
ties
0 ISO 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, sncluding photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 1622-2:2000
ISO 162202:1995(E)
INTERNATIONAL STANDARD 0 ISO
- Polystyrene (PS) moulding and extrusion
Plastics
materials -
Part 2:
Preparation of test specimens and determination of
properties
2 Normative references
1 Scope
The following Standards contain provisions which,
through reference in this text, constitute provisions
of this part of ISO 1622. At the time of publication, the
This part of ISO 1622 specifies the methods of prep-
editions indicated were valid. All Standards are subject
aration of test specimens and the test methods to be
to revision, and Parties to agreements based on this
used in determining the properties of PS moulding
patt of ISO 1622 are encouraged to investigate the
and extrusion materials. Requirements for handling
possibility of applying the most recent editions of the
test material and for conditioning both the test ma-
Standards indicated below. Members of IEC and ISO
terial before moulding and the specimens before
maintain registers of currently valid International
testing are given here.
Standards.
Procedures and conditions for the preparat
...