iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 391:1995

(Main)

Glued laminated timber - Delamination test of glue lines

Glued laminated timber - Delamination test of glue lines

This standard specifies three delamination methods for continuous quality control of the glue line integrity of glued laminated timber.

Brettschichtholz - Delaminierungsprüfung von Leimfugen

Diese Norm beschreibt drei Delaminierungsverfahren zur laufenden Überwachung der Leimfugengüte bei Brettschichtholz.

Bois lamellé collé - Essai de délamination des joints de collage

La présente norme décrit trois méthodes de délamination destinées au contrôle, en cours de production, de l'intégrité des joints de collage dans le bois lamellé-collé.

Lepljen lameliran les - Delaminacijski preskus lepljenih stikov

General Information

Status
Withdrawn
Publication Date
19-Jan-1995
Withdrawal Date
23-Oct-2001
ICS
79.060.99 - Other wood-based panels
Technical Committee
CEN/TC 124 - Timber structures
Drafting Committee
CEN/TC 124/WG 3 - Glued laminated timber
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
24-Oct-2001
Completion Date
24-Oct-2001
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/112 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural timber products
Ref Project
SIST EN 391:1996 - Glued laminated timber - Delamination test of glue lines

Relations

Replaced By
EN 391:2001 - Glued laminated timber - Delamination test of glue lines
Effective Date
22-Dec-2008

Buy Standard

EN 391:1996EN 391:1996
PreviousNext
Standard
EN 391:1996
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lepljen lameliran les - Delaminacijski preskus lepljenih stikovBrettschichtholz - Delaminierungsprüfung von LeimfugenBois lamellé collé - Essai de délamination des joints de collageGlued laminated timber - Delamination test of gl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14080:2013(Main)
Timber structures - Glued laminated timber and glued solid timber - Requirements
SIST EN 14080:2013

This European Standard sets the performance requirements of the following glued laminated products:
-   Glued laminated timber (glulam);
-   Glued solid timber;
-   Glulam with large finger joints;
-   Block glued glulam
for use in buildings and bridges.
It also lays down minimum production requirements, provisions for evaluation and attestation of conformity and marking of glued laminated products.
This European Standard is applicable for glued laminated timber made of coniferous species listed in this standard or poplar consisting of two or more laminations having a thickness from 6 mm up to 45 mm (inclusive).
It may be possible to produce glulam made from specific hardwood species based on some provisions of this European Standard. In this case, Annex ZA does not apply.
This European Standard is applicable for glued solid timber made of coniferous species listed in this standard or poplar consisting of two to five laminations having a thickness greater than 45 mm and less than or equal to 85 mm.
This European Standard is applicable for large finger joints in glued laminated timber with a finger length of at least 45 mm.
This European Standard is applicable for block glued glulam having solid rectangular cross sections.
This European Standard also gives the requirements for glued laminated products treated against biological attack. Glued laminated products treated with fire retardants are not covered.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 408:2010+A1:2012(Main + Amendment)
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
SIST EN 408:2010+A1:2012

This European Standard specifies test methods for determining the following properties of structural timber and glued laminated timber: modulus of elasticity in bending; shear modulus; bending strength; modulus of elasticity in tension parallel to the grain; tension strength parallel to the grain; modulus of elasticity in compression parallel to the grain; compression strength parallel to the grain; modulus of elasticity in tension perpendicular to the grain; tension strength perpendicular to the grain; modulus of elasticity in compression perpendicular to the grain; compression strength perpendicular to the grain and shear strength.
In addition, the determination of dimensions, moisture content, and density of test pieces are specified.
The methods apply to rectangular and circular shapes (of substantially constant cross section) of solid unjointed timber or finger-jointed timber and glued laminated timber unless stated otherwise.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 14080(Main)
Timber structures - Glued laminated timber and glued laminated solid timber - Requirements
oSIST prEN 14080:2009

This European Standard specifies the requirements for glued laminated timber for use in load bearing structures. It also specifies the requirements for large finger joints in the glued laminated timber. This European Standard specifies the requirements for glued laminated timber produced from untreated timber or from timber treated against biological attack.

  • Draft
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 408:2010/FprA1(Amendment)
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties.
SIST EN 408:2010/kFprA1:2012

This European Standard specifies test methods for determining the following properties of structural timber and glued laminated timber: modulus of elasticity in bending; shear modulus; bending strength, modulus of elasticity in tension and tension strength parallel to the grain; modulus of elasticity in compression and compression strength parallel to the grain; modulus of elasticity in tension and tension strength perpendicular to the grain; modulus of elasticity in compression and compression strength perpendicular to the grain; and shear strength.

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12369-3:2022(Main)
Wood-based panels - Characteristic values for structural design - Part 3: Solid wood panels
SIST EN 12369-3:2022

This document provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given are as defined in EN 1995-1-1.
This document includes the characteristic values of the mechanical properties and of the raw density for solid-wood panels complying with EN 13353:2022 technical classes SWP/1 S, SWP/2 S, SWP/3 S.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13353:2022(Main)
Solid wood panels (SWP) - Requirements
SIST EN 13353:2022

This document specifies requirements for solid wood panels as specified in EN 12775 with a maximum thickness of 80 mm for use in dry, humid and exterior conditions as specified in service classes 1, 2 and 3 of EN 1995-1-1.
Additional information on supplementary properties for certain applications is given in Annex A.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14080:2013(Main)
Timber structures - Glued laminated timber and glued solid timber - Requirements
SIST EN 14080:2013

This European Standard sets the performance requirements of the following glued laminated products:
-   Glued laminated timber (glulam);
-   Glued solid timber;
-   Glulam with large finger joints;
-   Block glued glulam
for use in buildings and bridges.
It also lays down minimum production requirements, provisions for evaluation and attestation of conformity and marking of glued laminated products.
This European Standard is applicable for glued laminated timber made of coniferous species listed in this standard or poplar consisting of two or more laminations having a thickness from 6 mm up to 45 mm (inclusive).
It may be possible to produce glulam made from specific hardwood species based on some provisions of this European Standard. In this case, Annex ZA does not apply.
This European Standard is applicable for glued solid timber made of coniferous species listed in this standard or poplar consisting of two to five laminations having a thickness greater than 45 mm and less than or equal to 85 mm.
This European Standard is applicable for large finger joints in glued laminated timber with a finger length of at least 45 mm.
This European Standard is applicable for block glued glulam having solid rectangular cross sections.
This European Standard also gives the requirements for glued laminated products treated against biological attack. Glued laminated products treated with fire retardants are not covered.

  • Standard
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 408:2010+A1:2012(Main + Amendment)
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
SIST EN 408:2010+A1:2012

This European Standard specifies test methods for determining the following properties of structural timber and glued laminated timber: modulus of elasticity in bending; shear modulus; bending strength; modulus of elasticity in tension parallel to the grain; tension strength parallel to the grain; modulus of elasticity in compression parallel to the grain; compression strength parallel to the grain; modulus of elasticity in tension perpendicular to the grain; tension strength perpendicular to the grain; modulus of elasticity in compression perpendicular to the grain; compression strength perpendicular to the grain and shear strength.
In addition, the determination of dimensions, moisture content, and density of test pieces are specified.
The methods apply to rectangular and circular shapes (of substantially constant cross section) of solid unjointed timber or finger-jointed timber and glued laminated timber unless stated otherwise.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13354:2008(Main)
Solid wood panels (SWP) - Bonding quality - Test method
SIST EN 13354:2009

This European Standard specifies a test method for determining the bonding quality of single-layer and multi-layer solid wood panels by a shear test.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14951:2006(Main)
Solid hardwood panelling and cladding - Machined profiles elements
SIST EN 14951:2006

This document defines the characteristics of solid hardwood panelling and cladding elements with or without grooves and/or tongues, for interior or exterior use.
It does not cover characteristics of the possible coating system.
NOTE 1   Products sold in The European Economic Area will have to comply with prEN 14915.
NOTE 2   For softwood see EN 14519.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day