EN ISO 11960:2001/AC:2003

Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2001)

ISO - Taking over of ISO Corrigendum

Erdöl- und Erdgasindustrie - Stahlrohre zur Verwendung als Futter- oder Steigrohre für Bohrungen (ISO 11960:2001)

Industries du pétrole et du gaz naturel - Tubes d'acier utilisés comme cuvelage ou tubes de production dans les puits (ISO 11960:2001)

Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2001/Cor.1:2002)

General Information

• Status: Withdrawn
• Publication Date: 16-Dec-2003
• Withdrawal Date: 14-Dec-2004
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Dec-2004
• Completion Date: 15-Dec-2004
• Ref Project: SIST EN ISO 11960:2004/AC:2004 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2001)

Relations

• Corrects: EN ISO 11960:2001 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2001)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 11960:2004 - Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2004)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2001/Cor.1:2002)Erdöl- und Erdgasindustrie - Stahlrohre zur Verwendung als Futter- oder Steigrohre für Bohrungen (ISO 11960:2001)Industries du pétrole et du gaz naturel - Tubes d'acier utilisés comme cuvelage ou tubes de production dans les puits (ISO 11960:2001)Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2001)77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific use75.180.10Oprema za raziskovanje in odkopavanjeExploratory and extraction equipmentICS:Ta slovenski standard je istoveten z:EN ISO 11960:2001/AC:2003SIST EN ISO 11960:2004/AC:2004en01-maj-2004SIST EN ISO 11960:2004/AC:2004SLOVENSKI
STANDARD



SIST EN ISO 11960:2004/AC:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 11960:2001/ACDecember 2003Décembre 2003Dezember 2003ICS 75.180.10; 77.140.75English versionVersion FrançaiseDeutsche FassungPetroleum and natural gas industries - Steel pipes for use ascasing or tubing for wells (ISO 11960:2001)Industries du pétrole et du gaz naturel - Tubes d'acier utiliséscomme cuvelage ou tubes de production dans les puits (ISO11960:2001)Erdöl- und Erdgasindustrie - Stahlrohre zur Verwendung alsFutter- oder Steigrohre für Bohrungen (ISO 11960:2001)This corrigendum becomes effective on 17 December 2003 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 17 décembre 2003 pour incorporation dans les trois versionslinguistiques officielles de l'EN.Die Berichtigung tritt am 17. Dezember 2003 zur Einarbeitung in die drei offiziellen Sprachfassungender EN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No. EN ISO 11960:2001/AC:2003 D/E/FSIST EN ISO 11960:2004/AC:2004



EN ISO 11960:2001/AC:2003 (E/F/D)2English versionEndorsement noticeThe text of ISO 11960:2001/Cor.1:2002 has been approved by CEN as a EuropeanCorrigendum without any modifications.Version françaiseNotice d'entérinementLe texte de l'ISO 11960:2001/Cor.1:2002 a été approuvé par le CEN comme Corrigendumeuropéen sans aucune modification.Deutsche FassungAnerkennungsnotizDer Text von ISO 11960:2001/Cor.1:2002 wurde vom CEN als Europäisches Corrigendumohne irgendeine Abänderung genehmigt.SIST EN ISO 11960:2004/AC:2004



ICS
75.180.10;
77.140.75 Ref. No. ISO 11960:2001/Cor.1:2002(E)©
ISO 2002 – All rights reserved Published in Switzerland
INTERNATIONAL STANDARD ISO 11960:2001 TECHNICAL CORRIGENDUM 1 Published 2002-11-01 Corrected version 2003-03-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION •
• ORGANISATION INTERNATIONALE DE NORMALISATION
Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells TECHNICAL CORRIGENDUM 1 Industries du pétrole et du gaz naturel — Tubes d'acier utilisés comme cuvelage ou tubes de production dans les puits RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO 11960:2001 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 5, Casing, tubing and drill pipe. This corrected version includes the Grade K55 in the title of Clause A.2.
Page 1 Subclause 1.1
Revise the penultimate paragraph to read “For pipes covered by this International Standard, the sizes, masses, wall thicknesses, grades and applicable end finish are listed in Tables C.1 to C.3 and Tables E.1 to E.3.”
Page 12 Subclause 6.1
In the second
...