CEN/TS 15675:2007

Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements

This Technical Specification supplements the requirements of EN ISO/IEC 17025:2005, and is suitable for the demonstration of competence of laboratories that undertake periodic measurement of emissions from stationary sources including
-   the taking of representative samples of emissions and subsequent laboratory analysis for gases and for particulate species,
-   the determination of reference quantities such as temperature, pressure, water vapour and oxygen content in the field and
-   the use of portable instruments (such as hand held instruments and transportable instruments used in mobile laboratories) in the field.
This Technical Specification is applicable to all laboratories undertaking the periodic measurement of emissions from stationary sources, the calibration of installed automated measuring systems in accordance with EN 14181:2004 and/or the field testing of automated measuring systems for conformity assessment purposes.

Luftbeschaffenheit - Messung von Emissionen aus stationären Quellen - Anwendung der EN ISO/IEC 17025:2005 auf wiederkehrende Messungen

Diese Technische Spezifikation ergänzt die Anforderung der Europäischen Norm EN ISO/IEC 17025:2005. Sie erlaubt den Nachweis der Kompetenz von Laboratorien, die wiederkehrende Messungen von Emissionen aus stationären Quellen durchführen. Solche Messungen beinhalten
   die repräsentative Entnahme von Emissionsproben und die anschließende Analyse der Gase und der partikelförmigen Stoffe im Labor,
   die Ermittlung der Bezugsgrößen wie Temperatur, Druck, Wasserdampfgehalt und Sauerstoffgehalt im Feld und
   die Verwendung tragbarer Geräte (wie Handgeräte und transportable Geräte in mobilen Loboratorien) im Feld.
Diese Technische Spezifikation gilt für alle Laboratorien, die wiederkehrende Messungen von Emissionen aus stationären Quellen, Kalibrierungen von eingebauten automatischen Messeinrichtungen nach EN 14181:2004 und/oder Feldtests von automatischen Messeinrichtungen im Rahmen von Eignungsprüfungen durchführen.

Qualité de l'air - Mesurage des émissions de sources fixes - Application de l'EN ISO /CEI 17025:2005 à des mesures périodiques

Kakovost zraka - Meritve emisije nepremičnih virov - Uporaba EN ISO/IEC 17025:2005 pri periodičnih meritvah

General Information

• Status: Withdrawn
• Publication Date: 23-Oct-2007
• Withdrawal Date: 24-Sep-2019
• ICS: 13.040.40 - Stationary source emissions
• Technical Committee: CEN/TC 264 - Air quality
• Drafting Committee: CEN/TC 264/WG 19 - Emissions monitoring strategy
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 25-Sep-2019
• Directive: 2000/76/EC - Directive 2000/76/EC of the European Parliament and of the Council of 4 December 2000 on the incineration of waste
• Directive: 2001/80/EC - Directive 2001/80/EC of the European Parliament and of the Council of 23 October 2001 on the limitation of emissions of certain pollutants into the air from large combustion plants
• Directive: 96/61/EC - Council Directive 96/61/EC of 24 September 1996 concerning integrated pollution prevention and control
• Ref Project: SIST-TS CEN/TS 15675:2008 - Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15675:2008
01-marec-2008
.DNRYRVW]UDND0HULWYHHPLVLMHQHSUHPLþQLKYLURY8SRUDED(1,62,(&
SULSHULRGLþQLKPHULWYDK
Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC
17025:2005 to periodic measurements
Luftbeschaffenheit - Messung von Emissionen aus stationären Quellen - Anwendung der
EN ISO/IEC 17025:2005 auf wiederkehrende Messungen
Qualité de l'air - Mesurage des émissions de sources fixes - Application de l'EN ISO /CEI
17025:2005 a des mesures périodiques
Ta slovenski standard je istoveten z: CEN/TS 15675:2007
ICS:
13.040.40
SIST-TS CEN/TS 15675:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

TECHNICAL SPECIFICATION
CEN/TS 15675
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
October 2007
ICS 13.040.40

English Version
Air quality - Measurement of stationary source emissions -
Application of EN ISO/IEC 17025:2005 to periodic
measurements
Qualité de l'air - Mesures des émissions de sources fixes - Luftbeschaffenheit - Messung von Emissionen aus
Application de EN ISO/CEI 17025:2005 à des mesures stationären Quellen - Anwendung der EN ISO/IEC
périodiques 17025:2005 auf wiederkehrende Messungen
This Technical Specification (CEN/TS) was approved by CEN on 18 September 2007 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15675:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

CEN/TS 15675:2007 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope .6
2 Normative references .6
3 Terms and definitions .6
4 Management requirements .10
5 Technical requirements .10
5.1 General.10
5.2 Personnel.10
5.3 Accommodation and environmental conditions .11
5.4 Test and method validation .12
5.5 Equipment .14
5.6 Measurement traceability.15
5.7 Sampling.16
5.8 Handling of test items .
...