EN 13412:2002

Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression

This European Standard specifies a method for the determination of the modulus of elasticity in compression for high creep strain repair products and systems, containing polymer binders (PC) and of mortars and concretes with polymer additives (PCC).
This method is not intended for CC repair materials, for which testing according to prEN 12390-3 should be used.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung des Elastizitätsmoduls im Druckversuch

Anwendungsbereich
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Elastizitätsmoduls im Druckversuch von stark kriechenden Instandsetzungsprodukten und -systemen mit polymeren Bindemitteln (PC) sowie von Mörtel und Betonen mit Polymerzusätzen (PCC) fest.
Dieses Verfahren ist nicht für CC-Instandsetzungsmaterialien geeignet, für deren Prüfung das in prEN 12390-3 angegebene Verfahren angewendet werden sollte.

Produits et systèmes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination du module d'élasticité en compression

La présente Norme européenne spécifie une méthode permettant de déterminer le module d'élasticité en compression des produits et systèmes de réparation à déformation de fluage élevée, contenant des liants polymères (PC) et des mortiers et des bétons contenant des liants hydrauliques et des adjuvants polymères (PCC).
Cette méthode ne s'applique pas aux matériaux de réparation CC pour lesquels il convient d'utiliser une méthode d'essai conforme à l'EN 12390-3.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Preskusne metode - Določevanje modula elastičnosti pri tlačni obremenitvi

General Information

• Status: Withdrawn
• Publication Date: 21-May-2002
• Withdrawal Date: 29-Aug-2006
• ICS: 91.080.40 - Concrete structures
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/SC 8/WG 3 - Bonding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 30-Aug-2006
• Completion Date: 30-Aug-2006
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: SIST EN 13412:2002 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression

Relations

• Replaced By: EN 13412:2006 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung des Elastizitätsmoduls im DruckversuchProduits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Détermination du module d'élasticité en compressionProducts and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 13412:2002SIST EN 13412:2002en01-november-2002SIST EN 13412:2002SLOVENSKI
STANDARD



SIST EN 13412:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13412May 2002ICS 91.080.40English versionProducts and systems for the protection and repair of concretestructures - Test methods - Determination of modulus ofelasticity in compressionProduits et systèmes de protection et de réparation desstructures en béton - Méthodes d'essai - Détermination dumodule d'élasticité en compressionProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Bestimmung des Elastizitätsmoduls im DruckversuchThis European Standard was approved by CEN on 27 December 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13412:2002 ESIST EN 13412:2002



EN 13412:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Principle.55Equipment.56Preparation of test specimens.57Procedure.58Calculation.69Report.6Annex A (normative)
Summary of temperatures and humidities for the curing, conditioning andtesting of repair products and systems.8SIST EN 13412:2002



EN 13412:2002 (E)3ForewordThis document EN 13412:2002 has been prepared by Technical Committee CEN/TC 104 "Concrete and relatedproducts", the secretariat of which is held by DIN.This document has been prepared by CEN/TC 104/SC 8 "Products and systems for the protection and repair ofconcrete structures", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latestby December 2002.This European Standard is one of a series dealing with products and systems for the protection and repair ofconcrete structures.Annex A is normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13412:2002



EN 13412:2002 (E)41 ScopeThis European Standard specifies a method for the determination of the modulus of elasticity in compression forhigh creep strain repair products and systems, containing polymer binders (PC) and of mortars and concretes withpolymer additives (PCC).This method is not intended for CC repair materials, for which testing according to prEN 12390–3 should be used.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 196-1, Methods of testing cement – Part 1: Determination of strength.EN 1504-1, Products and systems for the protection and repair of concrete structures - Definition, requirements,quality control, evaluation of conformity – Part 1: Definitions.prEN 1504-31, Products and systems for the protection and repair of concrete structures - Definition, requirements,quality control, evaluation of conformity – Part 3: Structural and non-structural repair.EN 12390-1, Testing of hardened concrete – Part 1: Shape, dimensions and other requirements for specimens andmoulds.prEN 12390-3, Testing of hardened concrete – Part 3: Compressive strength of test specimens.3 Terms and definitionsFor the purposes of this European Standard, the terms and definitions given in EN 1504-1 and prEN 1504-32 andthe following apply.3.1compressive stressthe compressive force carried at any time by the test specimen, per unit of the original cross-section3.2compressive strainthe ratio of the change in the distance between two reference points along the axis of the test specimen per unitlength of the original distance3.3elastic modulusth
...