EN ISO 13703-2:2023
(Main)Oil and gas industries including lower carbon energy - Piping systems on offshore platforms and onshore plants - Part 2: Materials (ISO 13703-2:2023)
Oil and gas industries including lower carbon energy - Piping systems on offshore platforms and onshore plants - Part 2: Materials (ISO 13703-2:2023)
This document provides a set of unified requirements and specifications regarding material quality level and pre-qualification for piping material of seamless pipes, welded pipes, wrought fittings, plates, forgings, bars, castings and piping bolts/nuts used for piping systems in the oil and gas industry, both offshore and onshore.
This document covers the following material grades:
- C-Mn steel;
- high strength steel;
- austenitic stainless steels;
- duplex stainless steels;
- nickel alloy;
- Cu-Ni alloy;
- titanium alloy;
- Cu-alloy.
Öl- und Gasindustrie einschließlich kohlenstoffarmer Energieträger - Rohrleitungssysteme auf Offshore-Förderplattformen und Onshore-Anlagen - Teil 2: Werkstoffe (ISO 13703-2:2023)
Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone - Conception et installation des systèmes de tuyauterie sur les plates-formes de production en mer et les installations à terre - Partie 2: Matériels (ISO 13703-2:2023)
Naftna in plinska industrija, vključno z nizkoogljično energijo - Cevni sistemi na plavajočih proizvodnih objektih in v kopenskih obratih - 2. del: Materiali (ISO 13703-2:2023)
Ta dokument podaja nabor enotnih zahtev in specifikacij v zvezi s stopnjo kakovosti materialov in predizborom cevnega materiala brezšivnih cevi, varjenih cevi, kovanih fitingov, plošč, izkovk, palic, ulitkov in cevnih vijakov/matic za cevne sisteme v naftni industriji in plinski industriji, tako na plavajočih proizvodnih objektih kot v kopenskih obratih.
Ta dokument zajema naslednje razrede materiala:
– ogljik-manganovo (C-Mn) jeklo;
– jeklo z visoko trdnostjo;
– avstenitna nerjavna jekla;
– dupleksna nerjavna jekla;
– nikljeve zlitine;
– baker-nikljeve (Cu-Ni) zlitine;
– titanove zlitine;
– bakrove zlitine.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2023
Naftna in plinska industrija, vključno z nizkoogljično energijo - Cevni sistemi na
plavajočih proizvodnih objektih in v kopenskih obratih - 2. del: Materiali (ISO 13703
-2:2023)
Oil and gas industries including lower carbon energy - Piping systems on offshore
platforms and onshore plants - Part 2: Materials (ISO 13703-2:2023)
Erdöl- und Erdgasindustrie - Rohrleitungssysteme auf Offshore-Förderplattformen und
Onshore-Anlagen - Teil 2: Rohrleitungswerkstoff (ISO 13703-2:2023)
Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone -
Conception et installation des systèmes de tuyauterie sur les plates-formes de
production en mer et les installations à terre - Partie 2: Matériels (ISO 13703-2:2023)
Ta slovenski standard je istoveten z: EN ISO 13703-2:2023
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 13703-2
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 75.180.10
English Version
Oil and gas industries including lower carbon energy -
Piping systems on offshore platforms and onshore plants -
Part 2: Materials (ISO 13703-2:2023)
Industries du pétrole et du gaz, y compris les énergies Erdöl- und Erdgasindustrie - Rohrleitungssysteme auf
à faible teneur en carbone - Conception et installation Offshore-Förderplattformen und Onshore-Anlagen -
des systèmes de tuyauterie sur les plates-formes de Teil 2: Rohrleitungswerkstoff (ISO 13703-2:2023)
production en mer et les installations à terre - Partie 2:
Matériels (ISO 13703-2:2023)
This European Standard was approved by CEN on 6 October 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13703-2:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 13703-2:2023) has been prepared by Technical Committee ISO/TC 67 "Oil and
gas industries including lower carbon energy" in collaboration with Technical Committee CEN/TC 12
“Oil and gas industries including lower carbon energy” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2024, and conflicting national standards shall be
withdrawn at the latest by April 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 13703-2:2023 has been approved by CEN as EN ISO 13703-2:2023 without any
modification.
INTERNATIONAL ISO
STANDARD 13703-2
First edition
2023-10
Oil and gas industries including lower
carbon energy — Piping systems
on offshore platforms and onshore
plants —
Part 2:
Materials
Industries du pétrole et du gaz, y compris les énergies à faible teneur
en carbone — Conception et installation des systèmes de tuyauterie
sur les plates-formes de production en mer et les installations à
terre —
Partie 2: Matériels
Reference number
ISO 13703-2:2023(E)
ISO 13703-2:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 13703-2:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 8
4 Abbreviated terms . 9
5 Material and element datasheets .11
5.1 General . 11
5.2 Numbering system .12
5.3 Deviations to ASME B31.3 .12
5.4 High pressure systems according to ASME B31.3 . 13
5.5 Parts designed to ASME BPVC VIII Div. 2 . 13
5.6 Qualification of manufacturers to ISO 17782 or NORSOK M-650 .13
5.7 Machining of valves or valve parts from bar . 14
5.8 NDT of piping and valves . 14
5.9 Pilot castings . 14
5.9.1 General . 14
5.9.2 Material qualification ranges for pilot castings . 14
5.9.3 NDT of pilot castings . 15
5.10 Ferritic-austenitic stainless steels . 15
5.11 Mechanical testing . 15
Annex A (normative) Material datasheets .16
Annex B (normative) Element datasheets .286
Annex C (informative) Guidance to European Pressure Equipment Directive . 297
Annex D (informative) Table of corresponding product standards . 298
Bibliography .310
iii
ISO 13703-2:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all
such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 67, Oil and gas industries including lower
carbon energy, Subcommittee SC 6, Process equipment, piping, systems, and related safety, in collaboration
with the European Committee for Standardization (CEN) Technical Committee CEN/TC 12, Oil and gas
industries including lower carbon energy, in accordance with the Agreement on technical cooperation
between ISO and CEN (Vienna Agreement).
This first edition of ISO 13703-2, together with ISO 13703-1 and ISO 13703-3, cancels and replaces
ISO 13703:2000, which has been technically revised. It also incorporates the Technical Corrigendum
ISO 13703:2000/Cor.1:2002.
The main changes compared to the previous edition are as follows:
— deletion of the installation and quality control requirements in Clause 10;
— deletion of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.