EN 4500-001:2012
(Main)Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules
Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules
This European Standard specifies the general rules for the drafting and presentation of metallic material standards for aerospace applications.
It is supported by additional rules specific to:
- Aluminium, aluminium alloys and magnesium alloys EN 4500-2;
- Heat resisting alloys EN 4500-003;
- Titanium and titanium alloys EN 4500-004;
- Steels EN 4500-005;
- Filler metals for welding EN 4500-2 to EN 4500-005;
- Filler metals for brazing EN 4500-6.
Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die Gestaltung von Werkstoffnormen - Teil 001: Allgemeine Regeln
Diese Norm legt die allgemeinen Regeln für das Erstellen und die Gestaltung von Normen für metallische Werkstoffe zur Anwendung in der Luft- und Raumfahrt fest.
Unterstützend gelten zusätzliche Regeln spezifisch für:
- Aluminium, Aluminiumlegierungen und Magnesiumlegierungen EN 4500-2;
- Wärmebeständige Legierungen EN 4500-003;
- Titan und Titanlegierungen EN 4500-004;
- Stähle EN 4500-005;
- Schweißzusätze EN 4500-2 bis EN 4500-005;
- Hartlote EN 4500-6.
Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes de matériaux - Partie 001: Règles générales
Cette Norme européenne spécifie générales pour la rédaction et la présentation des normes de matériaux
métalliques pour applications aérospatiales.
Elle est soutenue par des règles complémentaires propres à :
Aluminium, alliages d'aluminium et alliages de magnésium EN 4500-2 ;
Alliages résistant à chaud EN 4500-003 ;
Titane et alliages de titane EN 4500-004 ;
Aciers EN 4500-005 ;
Métaux d'apport de soudage EN 4500-2 à EN 4500-005 ;
Métaux d'apport de brasage EN 4500-6.
Aeronavtika - Kovinski materiali - Pravila za načrtovanje in predstavljanje standarov za materiale - 001. del: Splošna pravila
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VWDYOMDQMHLuft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die Gestaltung von Werkstoffnormen - Teil 001: Allgemeine RegelnSérie aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes de matériaux - Partie 001: Règles généralesAerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules49.025.15Neželezove zlitine na splošnoNon-ferrous alloys in general49.025.05Železove zlitine na splošnoFerrous alloys in generalICS:Ta slovenski standard je istoveten z:EN 4500-001:2012SIST EN 4500-001:2014en01-marec-2014SIST EN 4500-001:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4500-001
October 2012 ICS 49.025.05; 49.025.15 English Version
Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules
Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes de matériaux - Partie 001: Règles générales
Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die Gestaltung von Werkstoffnormen - Teil 001: Allgemeine Regeln This European Standard was approved by CEN on 23 June 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4500-001:2012: ESIST EN 4500-001:2014
..................................................................... 23 SIST EN 4500-001:2014
EN 4258, Aerospace series — Metallic materials — General organization of standardization — Links between types of EN standards and their use EN 4259, Aerospace series — Metallic materials — Definition of general terms 1)
1) Published as ASD-STAN Prestandard at the date of publication of this standard (www.asd-stan.org). SIST EN 4500-001:2014
EN 4500-003, Aerospace series — Metallic materials — Rules for drafting and presentation of material standards — Part 003: Specific rules for heat resisting alloys
EN 4500-004, Aerospace series — Metallic materials — Rules for drafting and presentation of material standards — Part 004: Specific rules for titanium and titanium alloys
express Vmin. and Vmax. in "p.p.m."; Vmin. > 0,01 % express in %. The number of decimal places written shall be consistent with the accuracy required. The base metal shall be indicated in the last column of the second line of boxes by means of a minimum and/or maximum value or by the expression "base". The standard order for presenta
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.