EN 14071:2015

LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment

This European Standard specifies the design, testing and inspection requirements for pressure relief valve isolating devices, valve manifolds, vent pipes and system assemblies which are, where necessary, used with pressure relief valves for use in static pressure vessels for Liquefied Petroleum Gas (LPG) service.
This European Standard addresses both prototype testing and production testing of isolating devices and PRV manifolds.
Pressure relief valves for LPG pressure vessels are specified in EN 14129:2014.

Flüssiggas-Geräte und Ausrüstungsteile - Druckentlastungsventile für Behälter für Flüssiggas (LPG) - Zusatzausrüstung

Diese Europäische Norm legt Anforderungen an die Auslegung, Prüfungen und Inspektion von Absperreinrichtungen für Druckentlastungsventile, Ventilsammelleitungen, Entlüftungsrohren und Systembaugruppen fest, welche bei Bedarf zusammen mit Druckentlastungsventilen für Druckbehälter für den Betrieb mit Flüssiggas (LPG, en: Liquefied Petroleum Gas) verwendet werden.
Druckentlastungsventile für LPG-Behälter sind in EN 14129 festgelegt.

Équipements pour GPL et leurs accessoires - Soupapes de sécurité des réservoirs de gaz de pétrole liquéfié (GPL) - Équipement auxiliaire

La présente Norme européenne spécifie les exigences en matière de conception, essais et inspection relatives aux clapets porte-soupape pour soupapes de sécurité, collecteurs de soupapes, prolongateurs de soupapes et systèmes d'assemblage utilisés, lorsque nécessaire, avec les soupapes de sécurité destinées à être installées sur des réservoirs sous pression statiques contenant du gaz de pétrole liquéfié (GPL).
La présente Norme européenne traite à la fois des essais sur prototype et des essais de production des clapets porte-soupape et des collecteurs de soupape.
Les soupapes de sécurité pour réservoirs GPL sous pression sont spécifiées dans l'EN 14129:2014.

Oprema in pribor za utekočinjeni naftni plin (UNP) - Varnostni ventili za tlačne posode za utekočinjeni naftni plin (UNP) - Pomožna oprema

General Information

• Status: Withdrawn
• Publication Date: 12-May-2015
• Withdrawal Date: 30-Apr-2019
• ICS: 23.060.40 - Pressure regulators
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286/WG 2 - Design and manufacture of accessories (valves, gauges, fittings) for LPG pressure vessels designed in WG1
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-May-2019
• Directive: 2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 94/55/EC - Transport of dangerous goods by road
• Directive: 96/49/EC - Transport of dangerous goods by rail
• Directive: 96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
• Directive: 96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 14071:2015 - LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment

Relations

• Replaces: EN 14071:2004 - Pressure relief valves for LPG tanks - Ancillary equipment
• Effective Date: 08-Jun-2022
• Merged Into: EN 14071:2015+A1:2019 - LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
• Effective Date: 18-Jan-2023
• Amended By: EN 14071:2015/FprA1 - LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
• Effective Date: 08-Mar-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flüssiggas-Geräte und Ausrüstungsteile - Druckentlastungsventile für Behälter für Flüssiggas (LPG) - ZusatzausrüstungÉquipements pour GPL et leurs accessoires - Soupapes de sûreté des réservoirs de gaz de pétrole liquéfié (GPL) - Équipement auxiliaireLPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment23.060.40Pressure regulators23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 14071:2015SIST EN 14071:2015en,fr,de01-julij-2015SIST EN 14071:2015SLOVENSKI
STANDARDSIST EN 14071:20051DGRPHãþD



SIST EN 14071:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14071
May 2015 ICS 23.060.40 Supersedes EN 14071:2004English Version
LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
Équipements pour GPL et leurs accessoires - Soupapes de sécurité des réservoirs de gaz de pétrole liquéfié (GPL) - Équipement auxiliaire
Flüssiggas-Geräte und Ausrüstungsteile - Druckentlastungsventile für Behälter für Flüssiggas (LPG) -Zusatzausrüstung This European Standard was approved by CEN on 5 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14071:2015 ESIST EN 14071:2015



EN 14071:2015 (E) 2 Contents Page Foreword .4 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms and definitions .7 4 Operating conditions .8 5 Materials .9 5.1 General .9 5.2 Metallic materials .9 5.3 Non-metallic components . 10 5.4 Lubricants, sealants, and adhesives . 10 5.5 Inspection Documents . 10 6 Design . 10 6.1 Introduction . 10 6.2 Pressure relief valve isolating devices . 10 6.2.1
...