iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1503-2:2000

(Main)

Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards

Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards

This European Standard lists steels for pressure containing valve bodies, bonnets and covers which are given in Standards other than European Standards.

Armaturen - Werkstoffe für Gehäuse, Oberteile und Deckel - Teil 2: Stähle, die in Europäischen Normen nicht festgelegt sind

Diese Europäische Norm enthält Stähle für drucktragende Armaturengehäuse, Oberteile und Deckel, die in Europäischen Normen nicht festgelegt sind.

Appareils de robinetterie - Matériaux pour les corps, chapeaux et couvercles - Partie 2: Autres aciers que ceux spécifiés dans les normes européennes

La présente norme européenne liste des aciers destinés aux corps, chapeaux et couvercles des appareils de robinetterie soumis à la pression, qui sont donnés dan des normes autres que les normes européennes.

Ventili - Materiali za ohišja in pokrove - 2. del: Jekla, ki niso specificirana v evropskih standardih

General Information

Status
Withdrawn
Publication Date
17-Oct-2000
Withdrawal Date
25-Aug-2015
ICS
23.060.01 - Valves in general
77.140.30 - Steels for pressure purposes
Technical Committee
CEN/TC 69 - Industrial valves
Drafting Committee
CEN/TC 69/WG 1 - Basic standards
Current Stage
9960 - Withdrawal effective - Withdrawal
Due Date
26-Aug-2015
Completion Date
26-Aug-2015
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 1503-2:2001 - Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards

Buy Standard

EN 1503-2:2001EN 1503-2:2001
PreviousNext
Standard
EN 1503-2:2001
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ventili - Materiali za ohišja in pokrove - 2. del: Jekla, ki niso specificirana v evropskih standardihArmaturen - Werkstoffe für Gehäuse, Oberteile und Deckel - Teil 2: Stähle, die in Europäischen Normen nicht festgelegt sindAppareils de robinetterie - Matériaux pour les corps, chapeaux et couvercles - Partie 2: Autres aciers que ceux spécifiés dans les normes européennesValves - Materials for bodies, bonnets and covers - Part 2: S
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 6059-505:2024(Main)
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 505: Lightning strike and current pulse
SIST EN 6059-505:2025

This document specifies a method to measure the ability of a protective sleeve to withstand specified severities of simulated lightning strikes.

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2213:2024(Main)
Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Bars - De ≤ 16 mm - 980 MPa ≤ Rm ≤ 1 180 MPa
SIST EN 2213:2025

This document specifies the requirements relating to:
Steel 15CrMoV6 (1.7334)
Air melted
Hardened and tempered
Bars
De ≤ 16 mm
980 MPa ≤ Rm ≤ 1 180 MPa
for aerospace applications.
W.nr: 1.7334.
ASD-STAN designation: FE-PL1505.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17011-3:2024(Main)
Electronic Public Procurement - Architecture - Part 3: Customisation Guideline
kSIST-TS FprCEN/TS 17011-3:2024

This document describes:
-   the rationale for building customisation supporting business cases that are specific to their business environment while maintaining organisational and semantic interoperability with the TC 440 specifications;
-   the difference between Usage specification and Extension specification;
-   a methodology on how to define customisations on:
-   BII Transaction specification,
-   Business rules,
-   Code lists;
-   how to claim compliance or conformance to a customisation of a TC 440 specification;
-   the connection to the eProcurement Ontology project.
This specification does not describe the detailed process of building an extension.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 18033:2024(Main)
Food authenticity - Quantitation of equine DNA relative to mammalian DNA in raw beef (meat)
SIST EN 18033:2025

This document specifies a real-time PCR procedure for the quantitation of the amount of equine DNA relative to total mammalian DNA in a raw meat sample.
Results of this equine assay are expressed in terms of equine (Equus genus) haploid genome copy numbers relative to total mammalian haploid genome copy numbers. This assay is specific for representatives of the genus Equus and therefore detects horse, mule, donkey and zebra DNA.
The method has been previously validated in a collaborative study and applied to DNA extracted from samples that consist of raw horse meat in a raw beef (meat) background.
The limit of detection has been determined experimentally to be at least 17 horse haploid genome equivalents (HGE) for both the equine PCR and the mammalian PCR based on the lowest dilution on the respective calibration curves through single laboratory validation. The lowest relative horse content of the target sequence included in the collaborative study was a mass fraction of 0,1 % based on gravimetrically prepared raw horse muscle tissue in a raw beef muscle tissue background.
The compliance assessment process is not part of this document.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1846-2:2024(Main)
Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance
SIST EN 1846-2:2025

This document specifies the common requirements for safety and the (minimum) common performance requirements of firefighting and rescue service vehicles as designated in EN 1846-1.
NOTE 1 Categories and mass classes of these vehicles are given in EN 1846-1.
NOTE 2 Vehicle means terrestrial vehicles that can also drive on rails and amphibious vehicles.
When drafting this document, it has been assumed that the finished standard automotive chassis (or
the chassis designed in accordance with the same principles) that is the basis for the firefighting or
rescue vehicle offers an acceptable safety level for its basic transport functions within the limits
specified by the manufacturer. Therefore, this document does not formulate requirements for this
chassis.
This document deals with all significant hazards, hazardous situations and events relevant to
firefighting and rescue service vehicles, when they are used as intended and under the conditions of
misuse which are reasonably foreseeable by the manufacturer.
Complementary specific requirements for aerial appliances are the subject of the following European
Standards:
— EN 1777: Hydraulic platforms (HPs) for firefighting and rescue services,
— EN 14043: Turntable ladders with combined movements,
— EN 14044: Turntable ladders with sequential movements.
NOTE 3 Additional regulations, not dealt with in this document, can apply in relation with the use of the
vehicles on public roads.
This document deals with firefighting and rescue vehicles intended for use in a temperature range
from –15 °C to +40 °C.
NOTE 4 In the case of utilization outside this temperature range, additional measures might be necessary as agreed between the manufacturer and the user. Such requirements are outside the scope of this document.
1.2   This document does not deal with the following types of firefighting or rescue vehicles or equipment:
-   vehicles designed exclusively for carrying personnel;
-   vehicles with a gross laden mass not exceeding 3 t;
-   boats;
-   aircraft;
-   railway vehicles;
-   ambulances (see EN 1789);
-   provisions for non-firefighting removable equipment driven by PTO;
-   airport vehicles in the scope of the recommendations of the International Civil Aviation Organization (ICAO).
1.3   This document deals with the technical requirements to minimize the hazards listed in Annex K which can arise during operational use, routine checking and maintenance of firefighting and rescue service vehicles when carried out in accordance with the specifications given by the manufacturer or his authorized representative.
It does not cover the hazards generated by:
-   non-permanently installed equipment i.e. portable equipment carried on the vehicle;
-   use in potentially explosive atmospheres;
-   commissioning and decommissioning;
-   electromagnetic compatibility.
Additional measures not dealt with in this document might be necessary for specific use (e.g. fire in natural environment, flooding, etc.).
1.4   This document is not applicable to machines that are manufactured before its date of publication as a European Standard.

  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/CLC/TR 17894:2024(Main)
Artificial Intelligence - Artificial Intelligence Conformity Assessment
kSIST-TP FprCEN/CLC/TR 17894:2024

This document sets out a review of the current methods and practices (including tools, assets, and conditions of acceptability) for
conformity assessment in respect to, among others, products, services, processes, management systems, organizations, or persons,
as relevant for the development and use of AI systems. It includes an industry horizontal (vertical agnostic) perspective as well as an
industry vertical perspective.
This document focuses only on the process of assessment and gap analysis of conformity. It defines the objects of conformity
related to AI systems and all other related aspects of the process of conformity assessment. The document also reviews to what
extent AI poses specific challenges with respect to assessment of, for example, software engineering, data quality and engineering
processes.
This document takes into account requirements and orientations from policy frameworks such as the EU AI strategy and those from
CEN and CENELEC member countries.
This document is intended for technologists, standards bodies, regulators and interested parties.

  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4681-004:2024(Main)
Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 004: ADA family, single and multicore assembly - Product standard
SIST EN 4681-004:2025

This document specifies the characteristics of UV laser printable electrical lightweight wires ADA family for use in the on-board 115 V (phase to neutral) or 200 V (phase-to-phase) AC, 28 VDC electrical systems of aircraft at operating temperatures between −65 °C and 180 °C. These cables are demonstrated to be arc resistant in sizes AWG 26 to 14 (115 VAC/200 VAC).
In addition, these cables can be suitable for use at 230 VAC/400 VAC in pressurized zones only when installed to take account of possible short circuit effects.
Other electrical system configurations are the responsibility of the users.
It is also possible to mark these cables by qualified compatible marking which satisfies the requirements of EN 3838:2022.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3662-001:2024(Main)
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification
SIST EN 3662-001:2025

This document specifies the three-pole temperature compensated circuit breakers with signal contacts, polarized or not, rated from 20 A to 50 A and used in aircraft on-board circuits. It describes specific environmental, electrical and mechanical characteristics and the stringency of tests to be applied according to test methods of EN 3841-100.
These circuit breakers are intended for use in aircraft with electrical supplies in accordance with EN 2282 (all categories).

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 71-19:2024(Main)
Safety of toys - Part 19: Migration of bisphenol A from toy materials
kSIST FprEN 71-19:2024

This document specifies requirements and a test method for migration of bisphenol A from toy materials. This document is applicable to toys intended for use by children under 36 months or other toys intended to be placed in the mouth.
NOTE   The European Commission Guidance Document No 11 on the Application of Directive 2009/48/EC on the Safety of Toys [3] provides guidelines to help on the classification of toys intended for children under 36 months of age or of 36 months and over.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12953-6:2024(Main)
Shell Boilers - Part 6: Requirements for equipment for the boiler
kSIST FprEN 12953-6:2024

This document specifies the minimum requirements for safety related equipment for shell boilers (generator and/or assemblies) as specified in EN 12953-1:2012, to ensure the boiler operates within the allowable limits (pressure, temperature, etc.) and if the limits are exceeded the energy supply is automatically interrupted and locked out, irrespective of the degree of intervention.
NOTE 1    For this document, the term “boiler” is applicable for generator and/or assemblies.
NOTE 2   The maximum time of operation without manual (human) intervention can be specified for each boiler system.
NOTE 3   Annex C gives recommendations of operation and testing of the boiler system with a maximum time of operation without manual (human) intervention of 24 h and 72 h.

  • Draft
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day