EN ISO 23125:2010
(Main)Machine tools - Safety - Turning machines (ISO 23125:2010)
Machine tools - Safety - Turning machines (ISO 23125:2010)
ISO 23125:2010 specifies the requirements and/or measures to eliminate the hazards or reduce the risks in the following groups of turning machines and turning centres, which are designed primarily to shape metal by cutting.
– Group 1: Manually controlled turning machines without numerical control.
– Group 2: Manually controlled turning machines with limited numerically controlled capability.
– Group 3: Numerically controlled turning machines and turning centres.
– Group 4: Single- or multi-spindle automatic turning machines.
Werkzeugmaschinen - Sicherheit - Drehmaschinen (ISO 23125:2010)
Diese Internationale Norm legt Anforderungen und/oder Maßnahmen zur Beseitigung von Gefährdungen oder zur Begrenzung von Risiken für die folgenden Bauarten von Drehmaschinen und Drehzentren, die in 3.1 definiert und vorzugsweise für die Kaltbearbeitung von Metall bestimmt sind, fest.
Bauart 1: Handgesteuerte Drehmaschine ohne numerische Steuerung
Bauart 2: Handgesteuerte Drehmaschinen mit begrenzten numerischen Steuerungsfähigkeiten
Bauart 3: Numerisch gesteuerte Drehmaschinen und Drehzentren
Bauart 4: Einzel- oder Multispindel-Drehautomaten
ANMERKUNG 1 Für eine detaillierte Information über die Maschinenbauarten siehe Definitionen in 3.4 und für obligato¬rische und optionale Betriebsarten siehe 3.5.
ANMERKUNG 2 Anforderungen in dieser Internationalen Norm sind im Allgemeinen für alle Drehmaschinenbauarten anwendbar. Wenn Anforderungen nur für (eine) bestimmte Bauart(en) von Drehmaschinen anwendbar sind, werden (wird) diese bestimmte Bauart(en) von Drehmaschinen festgelegt.
ANMERKUNG 3 Gefährdungen, die durch andere Metallbearbeitungsprozesse entstehen (z. B. Schleifen und Laser-bearbeitung) werden durch andere Internationale Normen abgedeckt (siehe „Literaturhinweise“).
Diese Internationale Norm deckt die in Abschnitt 4 aufgeführten signifikanten Gefährdungen ab und gilt auch für Zusatzeinrichtungen (z. B. für Werkstücke, Handhabungseinrichtungen für Werkzeuge und Werkstücke, sowie Späneförderer, usw.) die integrale Bestandteile der Maschine sind.
Diese Internationale Norm gilt auch für Maschinen, die in eine automatische Fertigungslinie oder Drehzelle integriert sind, wenn die auftretenden Gefährdungen und Risiken mit denen von separat arbeitenden Maschinen vergleichbar sind.
Diese Internationale Norm enthält ebenfalls eine Liste der sicherheitsrelevanten Informationen, die der Hersteller dem Betreiber mindestens zur Verfügung stellen muss. (....)
Machines-outils - Sécurité - Machines de tournage (ISO 23125:2010)
L'ISO 23125:2010 spécifie les exigences et/ou les mesures permettant d'éliminer les phénomènes dangereux ou de réduire les risques sur les groupes suivants de machines de tournage et centres de tournage qui sont principalement conçus pour le travail à froid des métaux par coupe:
Groupe 1: Machines de tournage à commande manuelle sans commande numérique
Groupe 2: Machines de tournage à commande manuelle avec commande numérique limitée
Groupe 3: Machines de tournage et centres de tournage à commande numérique
Groupe 4: Machines de tournage automatiques monobroches ou multibroches
Obdelovalni stroji - Varnost - Stroji za struženje (ISO 23125:2010)
Ta mednarodni standard določa zahteve in/ali ukrepe za odpravo nevarnosti ali zmanjšanje tveganj v naslednjih skupinah strojev za struženje in stružilnih centrov, ki so zasnovani v glavnem za oblikovanje kovin z rezanjem. - Skupina 1: Ročno krmiljeni stroji za struženje brez numeričnega krmiljenja. - Skupina 2: Ročno krmiljeni stroji za struženje z omejeno možnostjo numeričnega krmiljenja. - Skupina 3: Numerično krmiljeni stroji za struženje in stružilni centri. - Skupina 4: Eno- ali večvretenski avtomatski stroji za struženje. Ta mednarodni standard se uporablja tudi za stroje, ki so vgrajeni v avtomatsko proizvodno linijo ali stružilno celico, če so nevarnosti in tveganja, ki nastanejo, primerljiva s stroji, ki delujejo ločeno. Ta mednarodni standard tudi vključuje minimalni spisek podatkov, pomembnih za varnost, ki jih mora proizvajalec zagotoviti uporabniku. Glej tudi ISO 12100-1:2003, Slika 1, ki prikazuje povezanost odgovornosti proizvajalca in uporabnika za varnost obratovanja. Uporabnikova odgovornost, da identificira posebne nevarnosti (npr. požar in eksplozija) in zmanjša povezana tveganja, je lahko kritičnega pomena (npr. če osrednji sistem za odvajanje pravilno deluje). Kadar so vključeni dodatni postopki (npr. mletje, drobljenje itd.), se lahko ta mednarodni standard vzame kot osnova za varnostne zahteve; za specifične podatke glej bibliografijo. Ta mednarodni standard velja za stroje, ki so bili izdelani po datumu izdaje tega mednarodnega standarda.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2010
1DGRPHãþD
SIST EN 12415:2001
SIST EN 12415:2001/A1:2003
SIST EN 12478:2001
SIST EN 12478:2001/AC:2002
SIST EN 12840:2001
SIST EN 13788:2003
Obdelovalni stroji - Varnost - Stroji za struženje (ISO 23125:2010)
Machine tools - Safety - Turning machines (ISO 23125:2010)
Werkzeugmaschinen - Sicherheit - Drehmaschinen (ISO 23125:2010)
Machines-outils - Sécurité - Machines de tournage (ISO 23125:2010)
Ta slovenski standard je istoveten z: EN ISO 23125:2010
ICS:
13.110 Varnost strojev Safety of machinery
25.080.10 Stružnice Lathes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 23125
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2010
ICS 25.080.01 Supersedes EN 12415:2000, EN 12478:2000, EN
12840:2001, EN 13788:2001
English Version
Machine tools - Safety - Turning machines (ISO 23125:2010)
Machines-outils - Sécurité - Machines de tournage (ISO Werkzeugmaschinen - Sicherheit - Drehmaschinen (ISO
23125:2010) 23125:2010)
This European Standard was approved by CEN on 13 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23125:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this International Standard and the Essential
Requirements of 2006/42/EC .4
Foreword
This document (EN ISO 23125:2010) has been prepared by Technical Committee ISO/TC 39 "Machine tools"
in collaboration with Technical Committee CEN/TC 143 “Machine tools - Safety” the secretariat of which is
held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2010, and conflicting national standards shall be withdrawn
at the latest by November 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12478:2000, EN 12415:2000, EN 12840:2001, EN 13788:2001.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 23125:2010 has been approved by CEN as a EN ISO 23125:2010 without any modification.
Annex ZA
(informative)
Relationship between this International Standard and the Essential
Requirements of 2006/42/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 2006/42/EC “Machinery safety”.
Once this International Standard is cited in the Official Journal of the European Union under that Directive and
has been implemented as a national standard in at least one Member State, compliance with the normative e
clauses of this International Standard confers, within the limits of the scope of this International Standard, a
presumption of conformity with the corresponding Essential Requirements of that Directive and associated
EFTA regulations.
WARNING — Other requirements and other EU Directives (e.g. 2004/108/EC “Electromagnetic
compatibility”) may be applicable to the products falling within the scope of this International
Standard.
INTERNATIONAL ISO
STANDARD 23125
First edition
2010-05-01
Machine tools — Safety — Turning
machines
Machines-outils — Sécurité — Machines de tournage
Reference number
ISO 23125:2010(E)
©
ISO 2010
ISO 23125:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
ISO 23125:2010(E)
Contents Page
Foreword .v
Introduction.vi
1 Scope.1
2 Normative references.2
3 Terms and definitions .5
3.1 General terms .5
3.2 Parts of turning machines .6
3.3 Modes of operation .7
3.4 Size and groups of turning machines defined in this International Standard .8
3.4.1 General .8
3.5 Mandatory and optional modes of operation for turning machines .14
3.6 Maximum permissible spindle speeds and axes feeds.14
4 List of significant hazards .15
4.1 Main hazard zones.15
4.2 Significant hazards and hazardous situations covered by this International Standard.16
5 Safety requirements and/or measures.21
5.1 General requirements .21
5.1.1 Required characteristics for guards for all machine groups.21
5.2 Specific requirements resulting from mechanical hazards identified in Clause 4.22
5.2.1 Group 1 machines .22
5.2.2 Groups 2, 3 and 4 machines.23
5.2.3 Workpiece clamping conditions .26
5.2.4 Modes of machine operation.27
5.2.5 Optional or additional equipment for turning machines .31
5.3 Specific requirements resulting from electrical hazards .33
5.4 Specific requirements resulting from noise hazards .34
5.5 Specific requirements resulting from radiation hazards.34
5.6 Specific requirements resulting from material or substance hazards .34
5.7 Specific requirements resulting from neglect of ergonomic principles hazards .35
5.8 Specific requirements resulting from unexpected start-up, over-run or over-speed
hazards .37
5.9 Specific requirements resulting from variation in the rotational speed of tools hazards .39
5.10 Specific requirements resulting from failure of the power supply hazards.39
5.11 Specific requirements resulting from failure of the control circuit hazards.39
5.12 Specific requirements resulting from errors of fitting hazards.41
5.13 Specific requirements resulting from ejected fluids or objects hazards .41
5.13.1 General requirements .41
5.13.2 Guards for large vertical Group 3 machines (NC turning machines and turning centres).42
5.13.3 Guards for large horizontal Group 3 machines (NC turning machines and turning centres) .42
5.14 Specific requirements resulting from loss of stability hazards.43
5.15 Specific requirements resulting from slips, trips and fall of persons hazards.43
5.16 Verification of the safety requirements and/or protective measures .43
6 Information for use.46
6.1 Marking.46
6.2 Instruction for use .46
6.2.1 General .46
6.2.2 Tooling.48
6.2.3 Workpiece clamping.48
6.2.4 Machine functions accessible from the NC panel .49
ISO 23125:2010(E)
6.2.5 Restart.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.