iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13141-3:2004

(Main)

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use

This European standard specifies methods for measuring the main performance characteristics of range hoods for residential use. It applies to recirculating range hoods, air extraction range hoods incorporating a fan and air extraction range hoods without fan. This standard does not specify values for performance characteristics. Safety Requirements are specified in EN 60335-2-31.

Lüftung von Gebäuden - Leistungsprüfungen von Bauteilen/Produkten für die Lüftung von Wohnungen - Teil 3: Dunstabzugshauben für den Hausgebrauch

Diese Norm legt Verfahren zur Messung der Hauptleistungskenngrößen von Dunstabzugshauben für Wohnungen fest. Sie gilt für Umluft-Dunstabzugshauben und für Fortluft-Dunstabzugshauben mit und ohne Ventilator.
Diese Norm legt keine Werte für Leistungskenngrößen fest.

Ventilation des bâtiments - Essais de performance des composants/produits pour la ventilation des logements - Partie 3: Hottes de cuisine pour utilisation domestique

La présente norme européenne spécifie des méthodes pour mesurer les caractéristiques de performance principales des hottes de cuisine pour utilisation domestique. Elle s'applique aux hottes de cuisine à recirculation, aux hottes de cuisine à extraction d'air comprenant un ventilateur et aux hottes de cuisine à extraction d'air sans ventilateur. La présente norme ne spécifie pas de valeurs pour les caractéristiques de performance. Les prescriptions de sécurité sont spécifiées dans l'EN 60335-2-31.

Prezračevanje stavb - Preskušanje lastnosti stanovanjskih prezračevalnih komponent/izdelkov - 3. del: Kuhinjske nape za stanovanjsko uporabo

General Information

Status
Withdrawn
Publication Date
20-Jan-2004
Withdrawal Date
13-Jun-2017
ICS
91.140.30 - Ventilation and air-conditioning systems
97.040.20 - Cooking ranges, working tables, ovens and similar appliances
Technical Committee
CEN/TC 156 - Ventilation for buildings
Drafting Committee
CEN/TC 156/WG 2 - Natural and mechanical powered residential ventilation
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
14-Jun-2017
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
SIST EN 13141-3:2004 - Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use

Relations

Replaced By
EN 13141-3:2017 - Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use without fan
Effective Date
17-Sep-2014

Buy Standard

EN 13141-3:2004EN 13141-3:2004
PreviousNext
Standard
EN 13141-3:2004
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HYDOQLKERLüftung von Gebäuden - Leistungsprüfungen von Bauteilen/Produkten für die Lüftung von Wohnungen - Teil 3: Dunstabzugshauben für den HausgebrauchVentilation des bâtiments - Essais de performance des composants/produits pour la ventilation des logements - Partie 3: Hottes de cuisine pour utilisation domestiqueVentilation for buildings - Performance testing of components/products for residential ventilation - P
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13141-3:2017(Main)
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use without fan
SIST EN 13141-3:2017

This document specifies methods for measuring the main performance characteristics of range hoods for residential use. It applies to air extraction range hoods without fan.
This document does not specify:
-   values for performance characteristics;
-   safety requirements in relation with the use of methyl-ethyl ketone (MEK).
For air extraction range hoods with fan see IEC 61591

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13141-3:2017(Main)
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use without fan
SIST EN 13141-3:2017

This document specifies methods for measuring the main performance characteristics of range hoods for residential use. It applies to air extraction range hoods without fan.
This document does not specify:
-   values for performance characteristics;
-   safety requirements in relation with the use of methyl-ethyl ketone (MEK).
For air extraction range hoods with fan see IEC 61591

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12299:2024(Main)
Railway applications - Ride comfort for passengers - Measurement and evaluation
SIST EN 12299:2024

The purpose of this document is to provide methods for quantifying the ride comfort of a passenger in a rail vehicle in response to the track sections it is operated over.
The methods aim to quantify the effects of vehicle body motions on ride comfort and to make the assessment of passenger comfort predictable, repeatable, objective and meaningful.
The methods and comfort scales are validated for people of good health.
This document applies to passengers in rail vehicles operating on heavy rail networks.
This document applies to measurements of motions. It also applies to simulated motions. Guidance is provided on:
-   which method described within the document should be used for different scenarios;
-   typical values for different comfort levels;
-   the application of simulation.
This document excludes health and safety issues, non-passenger carrying vehicles, vehicle homologation and safety, limit values, motion sickness, discomfort caused by accelerating and braking, design guidelines and measurement technology.

  • Draft
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19403-4:2024(Main)
Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2024)
kSIST FprEN ISO 19403-4:2024

This document specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids from an interfacial tension with optical methods. The method can be applied for the characterization of liquid coating materials, especially if drying effects occur during alternative measurement. If applied to liquids with non-Newtonian flow behaviour (see ISO 3219-1:2021, 3.22), restrictions can apply.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17966:2024(Main)
Fire protection equipment - Carbon dioxide extinguishing systems for use on premises - Design and installation (ISO 6183:2022, modified)
SIST EN 17966:2024

This document specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of fixed carbon dioxide firefighting systems in buildings, plants or other structures. It is not applicable to extinguishing systems on ships, in aircraft, on vehicles or on mobile fire appliances, or to below ground systems in the mining industry; nor does it apply to carbon dioxide pre-inerting systems.
Design of systems where unclosable opening(s) of the protected volume exceed a specified area and where the opening(s) can be subject to the effect of wind is not specified, although general guidance on the procedure to be followed in such cases is given (see 7.4.3.2).

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16931-8:2024(Main)
Electronic invoicing - Part 8: Semantic data model of the elements of an e-receipt or a simplified electronic invoice
kSIST FprEN 16931-8:2024

This document establishes a semantic data model of an e-receipt or a simplified electronic invoice.
NOTE   In the remainder of this document, when “e-receipt” is mentioned, “simplified invoice” is also meant.
The semantic model includes essential information elements that an electronic receipt needs to ensure legal (including fiscal) compliance and to enable interoperability for cross-border, cross sector and domestic trade. The semantic model can be used by organizations in the private and the public sector for documenting by issuing a receipt for the purchase of services and /or goods. It can also be used for documenting a purchase between private sector enterprises. In addition, it has been designed for the use of consumers.

  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 15235:2024(Main)
Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination (ISO/TR 15235:2001)
kSIST-TP FprCEN ISO/TR 15235:2024

This Technical Report provides information on the effect of water-soluble chloride and sulfate contamination levels on steel surfaces, before the application of paint or related products to surfaces prepared in accordance with standard mechanical or blast-cleaning surface preparation methods.
NOTE The tolerance for water-soluble salt contamination may be different for different paint types.
This information may be used when evaluating the adequacy of surface preparation prior to painting.
This document is concerned only with measured levels of salt contamination based upon either laboratory or field testing. The levels of soluble chloride and sulfate discussed in this document are to be compared using soluble surface densities of the species as determined after extraction in accordance with ISO 8502-6 (the Bresle method), or other methods giving equivalent results. Total soluble-salt contamination may be determined by conductometric testing, but such testing will not determine the nature and concentration of the specific salts present, e.g. whether chloride or sulfate is present, or its concentration.
This document does not define specific levels of cleanliness or methods of salt removal.

  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 509:2024(Main)
Decorative fuel-effect gas appliances
kSIST FprEN 509:2024

This document specifies the requirements and test methods for the construction, safety, and marking of decorative fuel effect gas appliances not exceeding a nominal heat input of 20 kW (based on the net calorific value), thereafter referred to as appliances.
This document is applicable to appliances that are designed to simulate a solid fuel fire and incorporate a natural draught burner with or without an ignition burner, that uses one or more combustible gases of the three gas families at the pressures stated in EN 437:2021. The appliances are for decorative purposes only and are not heating appliances.
This document is applicable to type BAS, as described in 4.2, decorative fuel effect gas appliances that are designed to be installed within a non-combustible builder's opening or a non-combustible fireplace recess.
NOTE 1   This document specifies special national conditions in Annex C for appliances of category I2E+, marketed in Belgium.
NOTE 2   This document specifies special A-deviations in Annex D for appliances in Switzerland which require additional requirements for subclauses 6.6 and 6.7.
This document includes additional requirements for Type BBS appliances which are specified in Annex F.
In addition, this document is applicable to decorative fuel-effect gas appliances that are designed to be installed under a non-combustible canopy which is independent or integral with a flue box, for which additional requirements are specified in Annex A.
The use of toxic gases is not covered.
This document is not applicable to:
-   catalytic combustion appliances;
-   appliances in which the supply of combustion air and/or the evacuation of products of combustion is achieved by mechanical means.
NOTE 3   Requirements concerning the rational use of energy have not been included in this document, because the appliances are for decorative purposes.

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16906:2024(Main)
Resilient floor coverings - Determination of seam strength (ISO 16906:2015)
oSIST prEN ISO 16906:2024

ISO 16906:2015 specifies a method for determining the strength of the seams of resilient floor coverings when welded in accordance with the manufacturer's instructions.

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19403-6:2024(Main)
Paints and varnishes - Wettability - Part 6: Measurement of dynamic advancing and receding angle by changing the volume of a drop (ISO 19403‑6:2024)
kSIST FprEN ISO 19403-6:2024

This document specifies a method to measure the dynamic contact angle with an optical method. The dynamic advancing and the dynamic receding contact angles are determined.
By using the measurement specified in this document, the wetting and dewetting properties can be characterized. The morphological and chemical homogeneity of interfaces can also be determined.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day