EN 12380:2002

Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity

This European Standard sets out the various relevant test methods for requirements in Part 1.

Belüftungsventile für Entwässerungssysteme - Anforderungen, Prüfverfahren und Konformitätsbewertung

In dieser europäischen Norm werden verschiedene relevante Verfahren zur Leistungsprüfung festgelegt.

Clapets équilibreurs de pression pour systèmes d'évacuation - Exigences, méthodes d'essais et évaluation de conformité

La présente Norme européenne fixe les exigences, les méthodes d'essais et l'évaluation de la conformité des clapets équilibreurs de pression à utiliser dans les systèmes gravitaires à l'intérieur des bâtiments, conformément aux EN 12056-2 et 12056-5.
Elle spécifie les exigences de performances des clapets équilibreurs de pression et les méthodes d'essai permettant d'apporter la preuve de leur conformité à la présente norme.

Zračniki za kanalizacijske sisteme - Zahteve, preskusne metode in ocena skladnosti

General Information

• Status: Published
• Publication Date: 03-Dec-2002
• ICS: 23.060.99 - Other valves
• ICS: 91.140.80 - Drainage systems
• Technical Committee: CEN/TC 165 - Waste water engineering
• Drafting Committee: CEN/TC 165/WG 11 - Waste fittings
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 09-Jun-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/118 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on waste water engineering products
• Ref Project: SIST EN 12380:2003 - Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformityVNODGQRVWLClapets équilibreurs de pression pour systemes d'évacuation - Exigences, méthodes d'essais et évaluation de conformitéBelüftungsventile für Entwässerungssysteme - Anforderungen, Prüfverfahren und Konformitätsbewertung91.140.80Drenažni sistemiDrainage systems23.060.99Drugi ventiliOther valvesICS:SIST EN 12380:2003enTa slovenski standard je istoveten z:EN 12380:200201-oktober-2003SIST EN 12380:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12380December 2002ICS 23.060.99; 91.140.80English versionAir admittance valves for drainage systems - Requirements,tests methods and evaluation of conformityClapets équilibreurs de pression pour systèmesd'évacuation - Exigences, méthodes d'essais et évaluationde conformitéBelüftungsventile für Entwässerungssysteme -Anforderungen, Prüfverfahren und KonformitätsbewertungThis European Standard was approved by CEN on 23 September 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12380:2002 E

Model test report.19Annex ZA (informative)
Clauses of this European Standard addressing the provisions of
EUDirectives.20ZA.1Scope and relevant characteristics.20
...