EN 15376:2007

Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods

This document specifies requirements and test methods for marketed and delivered ethanol to be used as an extender for automotive fuel for petrol engine vehicles in accordance with the requirements of EN 228.
NOTE 1   This document gives all relevant characteristics, requirements and test methods for (bio)ethanol, which are known at this time to be necessary to define the product to be used up to a maximum 5 % (V/V) blending component for automotive gasoline fuel. If the percentage or use is expanded, the requirements need to be restudied.
NOTE 2   For the purposes of this document, the term "% (m/m)" and "% (V/V)" are used to represent the mass fraction and the volume fraction respectively.

Kraftstoffe für Kraftfahrzeuge - Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff - Anforderungen und Prüfverfahren

Dieses Dokument legt Anforderungen und Prüfverfahren für angeliefertes bzw. vermarktetes Ethanol fest, das
als Streckmittel für Kraftstoffe zum Einsatz in Kraftfahrzeugen mit Ottomotor in Übereinstimmung mit den
Anforderungen von EN 228 Verwendung findet.
ANMERKUNG 1 Dieses Dokument gibt alle relevanten Kenndaten, Anforderungen und Prüfverfahren für (Bio)Ethanol
vor, die zu diesem Zeitpunkt zur Bestimmung von Produkten, welche mit einem Volumenanteil Blendkomponente von bis
zu 5 % als Ottokraftstoff in Kraftfahrzeugen eingesetzt werden, für Notwendig befunden wurden. Bei einer Erweiterung
des Einsatzgebietes oder des Volumenanteils (an Blendkomponente) sind die Anforderungen neu zu untersuchen.
ANMERKUNG 2 Für die Zwecke dieser Europäischen Norm werden „% (m/m)“ und „% (V/V)“ anstelle der Begriffe
„Massenanteil in Prozent“ oder „Volumenanteil in Prozent“ verwendet.

Carburants pour automobiles - Ethanol comme base de mélange à l'essence - Exigences et méthodes d'essais

Le présent document prescrit des exigences et des méthodes d’essais pour l’éthanol mis sur le marché et livré pour être utilisé comme composant du carburant automobile pour véhicules à moteur à essence conformément aux exigences de l'EN 228.
NOTE 1   Le présent document donne l’ensemble des caractéristiques, des exigences et méthodes d'essai applicables à l’(au) (bio)éthanol qui sont actuellement reconnues comme nécessaires pour définir le produit destiné à être utilisé en mélange avec l’essence automobile à hauteur de 5 % (V/V) maximum. Pour une teneur plus élevée ou un usage plus large, les exigences générales doivent être réétudiées.
NOTE 2   Dans le cadre de ce document, les expressions "% (m/m)" et "% (V/V)" sont utilisées pour désigner respectivement les fractions massiques et les fractions volumiques.

Goriva za motorna vozila - Etanol kot komponenta za dodajanje motornemu bencinu - Zahteve in preskusne metode

General Information

• Status: Withdrawn
• Publication Date: 18-Dec-2007
• Withdrawal Date: 18-Aug-2009
• ICS: 75.160.20 - Liquid fuels
• Technical Committee: CEN/TC 19 - Petroleum products, lubricants and related products
• Drafting Committee: CEN/TC 19/WG 21 - Specification for unleaded petrol
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Aug-2009
• Completion Date: 19-Aug-2009
• Directive: 98/70/EC - Quality of petrol and diesel fuels (Dir. 93/12/EEC amendment)
• Mandate: M/344 - Mandate to CEN on Ethanol as an oxygen extender to gasoline
• Ref Project: SIST EN 15376:2008 - Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods

Relations

• Merged Into: EN 15376:2007+A1:2009 - Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
• Effective Date: 18-Jan-2023
• Revised: EN 15376:2011 - Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
• Effective Date: 06-May-2009

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Goriva za motorna vozila - Etanol kot komponenta za dodajanje motornemu bencinu - Zahteve in preskusne metodeKraftstoffe für Kraftfahrzeuge - Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff - Anforderungen und PrüfverfahrenCarburants pour automobiles - Ethanol comme base de mélange à l'essence - Exigences et méthodes d'essaisAutomotive fuels - Ethanol as a blending component for petrol - Requirements and test methods75.160.20Liquid fuels71.080.60Alkoholi. EtriAlcohols. EthersICS:Ta slovenski standard je istoveten z:EN 15376:2007SIST EN 15376:2008en,fr,de01-marec-2008SIST EN 15376:2008SLOVENSKI
STANDARD



SIST EN 15376:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15376December 2007ICS 75.160.20 English VersionAutomotive fuels - Ethanol as a blending component for petrol -Requirements and test methodsCarburants pour automobiles - Ethanol comme base demélange à l'essence - Exigences et méthodes d'essaisKraftstoffe für Kraftfahrzeuge - Ethanol zur Verwendung alsBlendkomponente in Ottokraftstoff - Anforderungen undPrüfverfahrenThis European Standard was approved by CEN on 10 November 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15376:2007: ESIST EN 15376:2008



EN 15376:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Sampling.5 4 Requirements and test methods.5 4.1 Dyes and markers.5 4.2 Additives.5 4.3 Denaturing.5 4.4 Generally applicable requirements and related test methods.6 4.5 Climate dependent requirements and related test methods.8 4.6 Precision and dispute.8 Bibliography.9
SIST EN 15376:2008



EN 15376:2007 (E) 3 Foreword This document (EN 15376:2007) has been prepared by Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at the latest by June 2008. This document has been prepared under mandate M/344 given to CEN by the European Commission and the European Fr
...