EN 13362:2018

Geosynthetic Barriers - Characteristics required for use in the construction of canals

This European Standard specifies the characteristics of geosynthetic barriers, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, when used as fluid barriers and separation layer forwater, in the construction of canals and the appropriate test methods to determine these characteristics.
The intended use of these products is to control the leakage of the fluid through the construction.
This document is not applicable to geotextiles or geotextile-related products, as defined in EN ISO 10318 1.
This document provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard including factory production control procedures.
This document defines characteristics to be considered with regard to the presentation of performance.
This document does not cover applications where the geosynthetic barrier is to be in contact with water that has been treated for human consumption.
NOTE   Where potable water is or can be in direct contact with the product, other relevant standards, requirements and/or regulations can be considered for the design.

Geosynthetische Dichtungsbahnen - Eigenschaften, die für die Anwendung beim Bau von Kanälen erforderlich sind

Dieses Dokument legt die Eigenschaften von geosynthetischen Dichtungsbahnen, einschließlich geosynthetische Kunststoff-, Ton- und Bitumendichtungsbahnen, die als Abdichtung und Trennschicht für Wasser beim Bau von Rückhaltebecken und Staudämmen verwendet werden, und die geeigneten Prüfverfahren zur Bestimmung dieser Eigenschaften fest.
Die bestimmungsgemäße Anwendung dieser Produkte ist das Durchsickern von Flüssigkeiten durch das Bauwerk zu kontrollieren.
Dieses Dokument ist nicht anwendbar auf Geotextilien oder geotextilverwandte Produkte im Sinne der Definition von EN ISO 10318-1.
Dieses Dokument behandelt die Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP) des Produkts nach dieser Europäischen Norm, einschließlich der Verfahren für die werkseigene Produktions-kontrolle.
Dieses Dokument legt Eigenschaften fest, die in Bezug auf die Darstellung der Leistung berücksichtigt werden müssen.
Dieses Dokument umfasst nicht die Anwendungen, bei denen die geosynthetische Dichtungsbahn in Kontakt mit Trinkwasser kommt, das für den unmittelbaren menschlichen Gebrauch behandelt wurde.
ANMERKUNG   Wo Trinkwasser in direkten Kontakt mit dem Produkt kommt oder kommen kann, können andere einschlägige Normen, Anforderungen und/oder Bestimmungen bei der Planung berücksichtigt werden.

Géomembranes et géosynthétiques bentonitiques - Caractéristiques requises pour l'utilisation dans la construction des canaux

Le présent document spécifie les caractéristiques applicables aux géosynthétiques d'étanchéité incluant les géomembranes polymériques, les géosynthétiques bentonitiques et les géomembranes bitumineuses utilisés comme barrière aux fluides ou couche de séparation pour l’eau dans la construction des canaux, ainsi que les méthodes d'essai appropriées pour déterminer ces caractéristiques.
Ces produits sont destinés à contrôler les fuites de fluides à travers la construction.
Le présent document ne s'applique pas aux géotextiles ou produits apparentés, tels que définis dans l'EN ISO 10318-1.
Le présent document permet d'évaluer et de vérifier la constance des performances (AVCP) du produit à la présente Norme européenne et les procédures de contrôle de la production en usine.
Le présent document établit les caractéristiques à considérer au regard des performances à vérifier.
NOTE   Si de l'eau potable est ou peut être en contact direct avec le produit, il convient que le concepteur se réfère également aux normes, exigences et/ou règlements applicables.

Geosintetične zapore - Zahtevane lastnosti pri gradnji kanalov

Ta dokument določa ustrezne lastnosti geosintetičnih zapor, vključno s polimernimi, opečnati in bitumenskimi geosintetičnimi zaporami, če se uporabljajo za zaščito pred tekočinami pri gradnji kanalov, in ustrezne preskusne metode za določanje teh lastnosti. Ti proizvodi se predvidoma uporabljajo za nadzor uhajanja vode skozi konstrukcijo. Ta dokument ne velja za geotekstilije ali sorodne izdelke. Ta dokument omogoča vrednotenje skladnosti izdelka s tem dokumentom. Ta dokument določa zahteve, ki jih morajo izpolniti proizvajalci in njihovi pooblaščeni zastopniki glede predstavitve lastnosti izdelka. Ta dokument ne zajema uporabe, kjer bodo geosintetične zapore v stiku s pitno vodo, ki je namenjena ljudem.  OPOMBA Če je oz. bo lahko proizvod v stiku s pitno vodo, mora projektant upoštevati tudi druge ustrezne standarde, zahteve in/ali predpise.

General Information

• Status: Published
• Publication Date: 13-Mar-2018
• Withdrawal Date: 30-Dec-2019
• ICS: 59.080.70 - Geotextiles
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Drafting Committee: CEN/TC 189/WG 6 - Geomembranes and geosynthetic clay liners - General and specific requirements
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/107 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on geotextiles
• Ref Project: SIST EN 13362:2018 - Geosynthetic Barriers - Characteristics required for use in the construction of canals

Relations

• Replaces: EN 13362:2013 - Geosynthetic barriers - Characteristics required for use in the construction of canals
• Effective Date: 21-Mar-2018

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geosynthetische Dichtungsbahnen - Eigenschaften, die für die Anwendung beim Bau von Kanälen erforderlich sindBarrières géosynthétiques - Caractéristiques requises pour l'utilisation dans la construction des canauxGeosynthetic Barriers - Characteristics required for use in the construction of canals93.140Construction of waterways, ports and dykes59.080.70GeotekstilijeGeotextilesICS:Ta slovenski standard je istoveten z:EN 13362:2018SIST EN 13362:2018en,fr,de01-maj-2018SIST EN 13362:2018SLOVENSKI
STANDARDSIST EN 13362:20131DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13362
March
t r s z ICS
w {ä r z rä y râ
{ sä s r rä w r Supersedes EN
s u u x tã t r s uEnglish Version
Geosynthetic Barriers æ Characteristics required for use in the construction of canals Géomembranes et géosynthétiques bentonitiques æ Caractéristiques requises pour l 5utilisation dans la construction des canaux
Geosynthetische Dichtungsbahnen æ Eigenschaftená die für die Anwendung beim Bau von Kanälen erforderlich sind This European Standard was approved by CEN on
t u October
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u u x tã t r s z ESIST EN 13362:2018

European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms, definitions and abbreviations . 8 3.1 Terms and definitions . 8 3.2 Abbreviations . 9 4 Characteristics and corresponding methods of test . 10 4.1 General . 10 4.2 Types of application . 10 4.3 Relevant characteristics . 11 4.4 Characteristics relevant to specific conditions of use . 17 4.5 Release of dangerous substances . 18 5 Assessment and verification of constancy of performance (AVCP) . 18 5.1 General . 18 5.2 Type testing . 18 5.3 Factory production control (FPC) . 22 Annex A (normative)
Durability of geosynthetic barriers . 31 A.1 General . 31 A.2 Weathering . 32 A.3 Products used with a service life up to 5 years . 34 A.4 Other applications and service life of 25 and 50 years . 34 A.5 Durability tests on GBR-P . 40 A.6 Evaluation tests on GBR-P and GBR-C . 47 A.7 Durability tests on GBR-B . 47 A.8 Evaluation tests on GBR-B . 52 Annex ZA (informative)
Relationship of this European Standard with Regulation (EU) No. 305/2011 . 54 ZA.1 Scope and relevant characteristics . 54 ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 55 ZA.3 Assignment of AVCP tasks . 56 Bibliography . 57
the list of normative references has been updated;
in 3.1 three terms have been added;
in 3.2 list of abbreviations has been updated;
in 4.3, Table 1, has been modified to comply with the modified mandate M/386 (inclusion of elongation in separation and filtration functions) and has been technically revised, all H-coded characteristics have been replaced by “A”,
figures and keys have been revised;
Clause 5 “Evaluation of conformity” has been superseded by new Clause 5 “Assessment and verification of constancy of performance (AVCP)”
Annex A “Factory production control – Factory production control scheme” has been deleted;
former Annex B “Durability” becomes Annex A, which has been totally revised;
Annex ZA has been updated according to new template to fulfil requirements of CPR, also examples for CE-marking have been deleted. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
...